Influence of Ammonium Pentaborate (APB) on the Performance of Urea Formaldehyde (UF) Adhesives for Plywood

Ammonium pentaborate (APB) was used to modify urea formaldehyde (UF) resins, in which the formaldehyde to urea molar ratio was set at 1.80, 1.50, 1.25, and 1.05. Some specific properties, including gel time, free formaldehyde content in UF, bond strength, and formaldehyde emission levels from plywood were evaluated. The result showed that APB increased the gel time length, but also decreased free formaldehyde content and emission levels, which was reduced mostly by 79.0% and 81.4%, respectively. The result of bond strength indicated that APB was proper to modify high F/U molar ratio of UF resin regardless of the loading level, but a recommended loading level should be considered to relevantly lower the F/U molar ratio of UF. The suggested loading level of APB to UF is 8.0% to 6.0%, 6.0%, and 4.0% to UF resin with F/U molar ratio of 1.8, 1.5, and 1.25 separately.     

On‐Demand Wrinkling Patterns in Thin Metal Films Generated from Self‐Assembling Liquid Crystals

In this work, a new, universal method is described that uses the photopatterning of liquid crystals, which is accurately translated into a controlled, intricately wrinkled metal surface. Remarkably, the patterns have an oscillation in amplitude of the wrinkles. This rapid method allows generation of intricate multidomain patterns and continuous circular structures, including azimuthal, radial, and even higher complexity arrangements as examples. These wrinkled gold surfaces are also strikingly visual, which is interesting for applications ranging from diffractive elements to fine jewelry.     

BaTiO3 incorporation effect on the dielectric properties of polymer from aqueous emulsion: An enhanced dispersion technique

An economic and environment friendly process was adapted to synthesize new dielectric composite materials. Using ethylene vinyl acetate (EVA)/vinyl ester of versatic acid (VeoVa) terpolymer as an aqueous emulsion provides a homogenous dispersion of BaTiO₃ (BT) particles, due to the high viscosity and polarity of the vinyl resin (VR). Composites films were obtained from these dispersions by water evaporation. The evolution of the dielectric properties as a function of the BaTiO₃ content, was correctly fitted by a Maxwell‐Garnett model. This fitting of the experimental curve shows a good dispersion of filler in the vinyl resin and the particles separation by a layer of resin as expected for the preparation method used in this study. The VR/BT composites show good synergy between the dielectric properties of the different phases of the composites due to the formation of macrodipoles and to the strong interactions between polar EVA/VeoVa groups and the BaTiO₃ particles surface. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44333.     

Large-scale production of a hypoallergenic preparation of F(ab′)2 fragments from bovine colostrum

A method for the production of bovine colostral F(ab′)₂ fragments at pilot-plant scale was developed. Optimum yield of immunoglobulins in colostral whey was obtained after rennet treatment of first milking colostrum. Pepsin digestion was carried out directly on the colostral whey at pH 3·8 for 4 h, which led to the complete digestion of immunoglobulins into F(ab′)₂ fragments. Elimination of β-lactoglobulin, the main immunogenic protein, was achieved by anion exchange on Duolite A560 at pH 6·0. The preparation was diafiltered with a 5000 Da membrane and the retentate spray-dried. The powder obtained contained approximately 34% F(ab′)₂ fragments, with an antibody activity three times higher than the initial colostrum.     

Effect of Oral and Parenteral N Nutrition vs N-Free Nutrition on the Endogenous Amino Acid Flow at the Ileum of the Pig*

Two methods were tested for suppressing the depressive effect of N-free diets on the digestive secretions in pigs: the blood perfusion of amino acids (AA) or the peptide alimentation method. In the latter, enzymically hydrolysed casein (EHC), composed of oligopeptides and free AA, was used as the source of nitrogen. The unabsorbed dietary N molecules were discarded from the ileal digesta by ultrafiltration or gel filtration, assuming that the endogenous fraction did not contain significant amounts of small molecules. The AA supply by blood perfusion had no effect on the ileal endogenous AA losses (8·0 g AA kg⁻¹ DM intake) in growing pigs (±50 kg), compared with the N-free diet alone (8·3 g), whereas the EHC supplementation significantly increased them (18·0 g). The increase was due to both endogenous and dietary N. The presence of unabsorbed dietary AA in the ileal digesta was confirmed by the AA profile of the soluble molecules with a very low molecular mass (<3 kDa), which was close to that of EHC. Both ultrafiltration (cut-offs of 3 or 10 kDa) and gel filtration methods, utilised to discard the remaining dietary molecules, also eliminated a significant proportion of endogenous AA.     

Influence of Ignition Sources on Heat Release Rate in the Furniture Calorimeter

When measuring the production rates of heat and smoke of upholstered furniture the ignition source must not influence the test results. In this paper variations in the strength, application time and geometry of the ignition burner used in the furniture calorimeter are studied. Results from replicate furniture calorimeter chair test show that the burning behaviour is almost independent of the burner intensity in the applied regime. Tests on six different furniture items were performed in the furniture calorimeter. The test objects were exposed to three intensity levels of ignition source. The sources were: a large propane burner giving 30 kW during 120 s and a smaller propane burner used at two levels of heat output, 1.7 and 5.8 kW during 90 s. The results showed that the burning behaviour of the furniture was very similar regardless of which burner was used. This was especially evident when the time regime between 50 and 400 kW was studied. The length of this period is a measurement on how quick untenable conditions are developing in a single, well-ventilated compartment.     

Intrinsic second-order nonlinearity in chalcogenide glasses containing HgI2

Frequency conversion using nonlinear optical (NLO) crystals is widely used in advanced photonic technologies to produce coherent light in the spectral regions where the available laser sources are missing. Isotropic glasses usually do not show second order nonlinear processes like second harmonic or difference frequency generation (SHG, DFG) except for temporarily induced anisotropy under external stimuli. Here, we show that a HgI₂–Ga₂S₃–GeS₂ homogeneous glass exhibits a strong intrinsic SHG response comparable with that of the well-known NLO single crystal LiNbO₃. The origin of this extremely rare phenomenon seems to be noncentrosymmetric bent HgI₂ molecules embedded in a sulfide glassy host. Taking into account the unique properties of chalcogenide glasses (wide IR transmission, low phonon density, unlimited ability to be modified changing the appropriate glass properties, fiber drawing and thin layer design), the observed phenomenon opens up the possibility of creating fundamentally new devices for mid-IR photonics.