Antimicrobial Activity of Nisin and Natamycin Incorporated Sodium Caseinate Extrusion‐Blown Films: A Comparative Study with Heat‐Pressed/Solution Cast Films

Antimicrobial edible films based on sodium caseinate, glycerol, and 2 food preservatives (nisin or natamycin) were prepared by classical thermomechanical processes. Food preservatives were compounded (at 65 °C for 2.5 min) with sodium caseinate in a twin‐screw extruder. Anti‐Listeria activity assays revealed a partial inactivation of nisin following compounding. Thermoplastic pellets containing food preservatives were then used to manufacture films either by blown‐film extrusion process or by heat‐press. After 24 h of incubation on agar plates, the diameters of K. rhizophila growth inhibition zones around nisin‐incorporated films prepared by solution casting (control), extrusion blowing or heat pressing at 80 °C for 7 min of nisin‐containing pellets were 15.5 ± 0.9, 9.8 ± 0.2, and 8.6 ± 1.0 mm, respectively. Since heat‐pressing for 7 min at 80 °C of nisin‐incorporated pellets did not further inactivate nisin, this indicates that nisin inactivation during extrusion‐blowing was limited. Moreover, the lower diameter of the K. rhizophila growth inhibition zone around films prepared with nisin‐containing pellets compared to that observed around films directly prepared by solution casting confirms that nisin inactivation mainly occurred during the compounding step. Natamycin‐containing thermoplastic films inhibited Aspergillus niger growth; however, by contrast with nisin‐containing films, heat‐pressed films had higher inhibition zone diameters than blown films, therefore suggesting a partial inactivation of natamycin during extrusion‐blowing.     

Large-scale production of a hypoallergenic preparation of F(ab′)2 fragments from bovine colostrum

A method for the production of bovine colostral F(ab′)₂ fragments at pilot-plant scale was developed. Optimum yield of immunoglobulins in colostral whey was obtained after rennet treatment of first milking colostrum. Pepsin digestion was carried out directly on the colostral whey at pH 3·8 for 4 h, which led to the complete digestion of immunoglobulins into F(ab′)₂ fragments. Elimination of β-lactoglobulin, the main immunogenic protein, was achieved by anion exchange on Duolite A560 at pH 6·0. The preparation was diafiltered with a 5000 Da membrane and the retentate spray-dried. The powder obtained contained approximately 34% F(ab′)₂ fragments, with an antibody activity three times higher than the initial colostrum.     

Influence of Ignition Sources on Heat Release Rate in the Furniture Calorimeter

When measuring the production rates of heat and smoke of upholstered furniture the ignition source must not influence the test results. In this paper variations in the strength, application time and geometry of the ignition burner used in the furniture calorimeter are studied. Results from replicate furniture calorimeter chair test show that the burning behaviour is almost independent of the burner intensity in the applied regime. Tests on six different furniture items were performed in the furniture calorimeter. The test objects were exposed to three intensity levels of ignition source. The sources were: a large propane burner giving 30 kW during 120 s and a smaller propane burner used at two levels of heat output, 1.7 and 5.8 kW during 90 s. The results showed that the burning behaviour of the furniture was very similar regardless of which burner was used. This was especially evident when the time regime between 50 and 400 kW was studied. The length of this period is a measurement on how quick untenable conditions are developing in a single, well-ventilated compartment.     

Artificial Intelligence Technologies for COVID-19 De Novo Drug Design

The recent covid crisis has provided important lessons for academia and industry regarding digital reorganization. Among the fascinating lessons from these times is the huge potential of data analytics and artificial intelligence. The crisis exponentially accelerated the adoption of analytics and artificial intelligence, and this momentum is predicted to continue into the 2020s and beyond. Drug development is a costly and time-consuming business, and only a minority of approved drugs generate returns exceeding the research and development costs. As a result, there is a huge drive to make drug discovery cheaper and faster. With modern algorithms and hardware, it is not too surprising that the new technologies of artificial intelligence and other computational simulation tools can help drug developers. In only two years of covid research, many novel molecules have been designed/identified using artificial intelligence methods with astonishing results in terms of time and effectiveness. This paper reviews the most significant research on artificial intelligence in de novo drug design for COVID-19 pharmaceutical research.     

Blackfin处理器面向开源应用

在嵌入式应用中。随着“开源”C／C 代码越来越成为流行的用于替代基于版权算法的另一选择，挑战也随之而来。其中，最重要的问题是如何优化代码．使其在选定的处理器中更好地运行。本文将探讨开源算法在Blockfin处理器上的移植以及代码优化。     

便携式电子设备中的立体声

手机等便携式电子产品正集成越来越多的多媒体功能，这引起了人们对增加立体声功能的极大兴趣。单声道结构用于声音放大及和弦铃声，在某些情况下可用作免提扬声器。虽然功能已足够，但这并非是令人满意的高质量音乐播放解决方案。     

Spatio-temporal analysis of trap catches of Tribolium confusum du Val in a semolina-mill, with a comparison of female and male distributions

By using food-bait traps, we evaluated the presence and the spatio-temporal distribution of insect pests in an industrial semolina-mill, with particular attention to Tribolium confusum du Val in which the spatio-temporal dynamics of females and males were also studied separately. A total of 1401 insect specimens was captured in the traps, belonging to 14 taxa, mainly Coleoptera. The most abundant species were T. confusum (with 1002 adults), followed by Typhaea stercorea (L.) (with 158 adults) and T. castaneum (Herbst) (with 110 adults). Of particular interest was the presence in the food-bait traps of T. confusum and T. castaneum adults in a mixed population with equal numbers of males and females. Furthermore, analysis of the spatio-temporal dynamics suggested that the distribution of the two sexes in T. confusum was almost the same during the entire sampling period. The findings of our study can usefully be applied to the management of Tribolium infestations, but further and more detailed studies are needed to better understand the ecology and behaviour of the species in association with searching for food and production of aggregation pheromones.     

Growth and characterization of gold catalyzed SiGe nanowires and alternative metal-catalyzed Si nanowires

The growth of semiconductor (SC) nanowires (NW) by CVD using Au-catalyzed VLS process has been widely studied over the past few years. Among others SC, it is possible to grow pure Si or SiGe NW thanks to these techniques. Nevertheless, Au could deteriorate the electric properties of SC and the use of other metal catalysts will be mandatory if NW are to be designed for innovating electronic. First, this article's focus will be on SiGe NW's growth using Au catalyst. The authors managed to grow SiGe NW between 350 and 400°C. Ge concentration (x) in Si1-xGex NW has been successfully varied by modifying the gas flow ratio: R = GeH4/(SiH4 + GeH4). Characterization (by Raman spectroscopy and XRD) revealed concentrations varying from 0.2 to 0.46 on NW grown at 375°C, with R varying from 0.05 to 0.15. Second, the results of Si NW growths by CVD using alternatives catalysts such as platinum-, palladium- and nickel-silicides are presented. This study, carried out on a LPCVD furnace, aimed at defining Si NW growth conditions when using such catalysts. Since the growth temperatures investigated are lower than the eutectic temperatures of these Si-metal alloys, VSS growth is expected and observed. Different temperatures and HCl flow rates have been tested with the aim of minimizing 2D growth which induces an important tapering of the NW. Finally, mechanical characterization of single NW has been carried out using an AFM method developed at the LTM. It consists in measuring the deflection of an AFM tip while performing approach-retract curves at various positions along the length of a cantilevered NW. This approach allows the measurement of as-grown single NW's Young modulus and spring constant, and alleviates uncertainties inherent in single point measurement.     

Synthesis and Pharmacological Evaluation of a series of the Agomelatine Analogues as Melatonin MT1/MT2 Agonist and 5‐HT2C Antagonist

Agomelatine is a naphthalenic analogue of melatonin that is in clinical use for the treatment of major depressive disorders. Interestingly, while agomelatine exhibits potent affinity for melatonin receptors, it binds with only moderate affinity to the serotonin 5‐HT_2C receptor. Optimization of agomelatine toward this target could further potentiate its clinical efficacy. To explore this hypothesis and to access derivatives in which a key point of agomelatine metabolism is blocked, a series of naphthalenic derivatives was designed and synthesized as novel analogues of agomelatine. Most of the prepared compounds exhibited good binding affinity at the melatonin MT₁ and MT₂ receptor subtypes. Two compounds, an acetamide and an acrylamide derivative, exhibited good binding affinities at both the human melatonin (MT) receptors and the serotonin 5‐HT_2C receptor subtype, with pK_i values of 7.96 and 7.95 against MT₁, 7.86 and 8.68 against MT2, and 6.64 and 6.44 against 5‐HT_2C, respectively.