Modification of Polycarbonate and Glycol Modified Poly(ethylene terephthalate) by Addition of Silica‐Nanoparticles Grafted with SAN Copolymer Using “Classical” and ARGET ATRP

This study presents a nanocomposite manufacturing route starting from non‐functionalized nanosilica and SAN surface modification via “grafting from” ATRP up to processing of transparent polycarbonate and glycol modified poly(ethylene terephthalate) nanocomposites. Synthesis limitations of low molecular weight graft SAN derived from “classical” ATRP are overcome by employment of the emerging ARGET ATRP. Mechanical investigations of polycarbonate and glycol modified poly(ethylene terephthalate) nanocomposites present up to 80% enhancement of creep performance and additionally 70% enhancement against wear abrasion for glycol modified poly(ethylene terephthalate) nanocomposites. Strength and tensile modulus are only moderately influenced by the addition of nanoparticles. Morphological studies confirm that the present modification route is able to create uniform dispersions of single particles and small particle aggregates in polymer matrices.

     

A brief review of environmentally benign antifouling and foul-release coatings for marine applications

Antifouling coatings for ship hulls are a very important topic in coating research. They are essential with respect to fuel consumption of ships: without antifouling coating, biological species start to adhere to the ship’s exterior, leading to a gradual increase in fuel consumption. To date, the working principle of most of the paint systems applied is based on slow release of toxins in time (self-polishing coatings). In this article, we discuss the environmental impact of marine antifouling coatings based on quantitative data available from literature. In addition, we critically review hydrophilic antifouling and hydrophobic foul-release coatings as toxin-free alternatives and discuss their potential for replacing self-polishing coatings.     

Lithium conducting solid electrolyte Li1.3Al0.3Ti1.7(PO4)3 obtained via solution chemistry

NaSICON-type lithium conductor Li_1.3Al_0.3Ti_1.7(PO₄)₃ (LATP) is synthesized with controlled grain size and composition using solution chemistry. After thermal treatment at 850 °C, sub-micronic crystallized powders with high purity are obtained. They are converted into ceramic through Spark Plasma Sintering at 850–1000 °C. By varying the processing parameters, pellet with conductivities up to 1.6 × 10^?4 S/cm with density of 97% of the theoretical density have been obtained. XRD, FEG-SEM, ac-impedance and Vickers indentation were used to characterize the products. The influence of sintering parameters on pellet composition, microstructure and conductivity is discussed in addition to the analysis of the mechanical behavior of the grains interfaces.     

Induction of DNA-double-strand breaks by auger electrons from 99mTc complexes with DNA-binding ligands

The potential of certain Auger electron emitting nuclides for systemic radiotherapeutic applications has recently gained much attention. In particular, the ability of several nuclides, including 111In, 125I, and 123I, to induce DNA double-strand breaks (dsb), a good indicator of cytotoxicity, has been extensively studied. However, this ability has never previously been shown experimentally for 99mTc, which, besides the well-known gamma radiation that is used for diagnostic applications, also emits an average of 1.1 conversion electrons and 4 Auger or Coster-Kronig electrons per decay. Owing to the short range of Auger electrons, the radionuclide needs to be located very close to the DNA for dsb to occur. We synthesized two cationic 99mTcI-tricarbonyl complexes with pendant DNA binders, pyrene and anthraquinone. The X-ray crystal structures of the two complexes could be elucidated. Linear dichroism and UV/Vis spectroscopy revealed that the complex with pyrene intercalates DNA with a stability constant, K, of 1.1 x 10(6) M(-1), while the analogous complex with anthraquinone interacts with DNA in a groove-binding mode and has an affinity value of K=8.9 x 10(4) M(-1). We showed with phiX174 double-stranded DNA that the corresponding 99mTc complexes induce a significant amount of dsb, whereas non-DNA-binding [TcO4]- and nonradioactive Re compounds did not. These results indicate that the Auger electron emitter 99mTc can induce dsb in DNA when decaying in its direct vicinity and this implies potential for systemic radiotherapy with 99mTc complexes.     

Influence of Missing Values on the Prediction of a Stationary Time Series

Abstract. The influence of missing observations on the linear prediction of a stationary time series is investigated. Simple bounds for the prediction error variance and asymptotic behaviours for short and long‐memory processes respectively are presented.     

BaTiO3 incorporation effect on the dielectric properties of polymer from aqueous emulsion: An enhanced dispersion technique

An economic and environment friendly process was adapted to synthesize new dielectric composite materials. Using ethylene vinyl acetate (EVA)/vinyl ester of versatic acid (VeoVa) terpolymer as an aqueous emulsion provides a homogenous dispersion of BaTiO₃ (BT) particles, due to the high viscosity and polarity of the vinyl resin (VR). Composites films were obtained from these dispersions by water evaporation. The evolution of the dielectric properties as a function of the BaTiO₃ content, was correctly fitted by a Maxwell‐Garnett model. This fitting of the experimental curve shows a good dispersion of filler in the vinyl resin and the particles separation by a layer of resin as expected for the preparation method used in this study. The VR/BT composites show good synergy between the dielectric properties of the different phases of the composites due to the formation of macrodipoles and to the strong interactions between polar EVA/VeoVa groups and the BaTiO₃ particles surface. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44333.     

Enhancing laccase stability and activity for dyes decolorization using ZIF-8@MWCNT nanocomposite

The continuous use of chemical dyes in various industries, and their discharge into industrial effluents, results in severe problems to human life and water pollution. Laccases have the ability to decolorize dyes and toxic chemicals in industrial effluents as green biocatalysts. Their possible industrial applications have been limited by poor reusability, low stability, and loss of free laccase action. In this research, laccase was immobilized on zeolitic imidazolate framework coated multi-walled carbon nanotubes (Laccase@ZIF-8@MWCNTs) via metal affinity adsorption to develop an easy separable and stable enzyme. The optimum reaction conditions for immobilized laccase are at a pH of 3.0 and a temperature of 60?℃. The immobilized laccase was enhanced in storage and thermal stability. The results indicated that Laccase@ZIF-8@MWCNTs still maintained 68% of its original activity after 10 times of repeated use. Most importantly, the biocatalytic system was applied for decolorization of different dyes (20?mg·L^?1) without a mediator, and up to 97.4% for Eriochrome black T and 95.6% Acid red 88 was achieved in 25 min. Biocatalysts with these properties may be used in a variety of environmental and industrial applications.     

Alumina foam catalyst supports for industrial steam reforming processes

The manufacture and the characterisation of alumina foams as alternative catalysts supports for industrial steam reforming processes are presented here. The possibility of use of alumina foams as catalysts supports in such processes is evaluated by studying their resistance toward mechanical and chemical stresses. The alumina foams produced are characterised owing to their processing parameters (slurry infiltration, sintering temperature, template pore size). Their ability to work in hydrothermal atmosphere is assessed by characterising the evolution of microstructures and mechanical strengths upon aging. Thermodynamic studies of the stability of alumina in industrial steam reforming working conditions are performed and correlated to the experiments to demonstrate the stability of such a system.     

Iron oxide magnetic nanoparticles used as probing agents to study the nanostructure of mixed self-assembled monolayers

Self-assembled monolayers (SAMs) of organic molecules are of exceptional technological importance since they represent a convenient, flexible, and simple system for tuning the chemical and physical properties of surfaces. The fine control of surface properties is directly dependent on the structure of mixed SAMs which is difficult to characterize at the nanoscale with usual techniques such as scanning probe microscopies. In this study, we report on a general method to investigate at the nanoscale the structure of molecular patterns which consist in SAMs of two components. Iron oxide nanoparticles (NPs) have been used as probing agents to study indirectly the structure of mixed SAMs. Mixed SAMs were prepared by the replacement of mercaptododecane (MDD) adsorbed by mercaptoundecanoic acid (MUA) molecules on gold substrates. Therefore, the SAM surface displays both chelating carboxylic terminal groups and non-chelating methylene terminal groups. As NPs have been previously demonstrated to specifically interact with carboxylic acid groups, the increasing density in NPs was correlated with the evolution of the COOH/CH(3) terminal groups ratio. Therefore the structure of mixed SAMs was studied indirectly as well as the kinetic of the replacement reaction and its mechanism. With this aim, we took advantage of the SPR properties of the gold substrate and of the high refractive index of iron oxide nanoparticles to follow their assembling on mixed SAMs as a time resolved study. The high sensitivity and tuning of the SPR signal over a wide range of wavelengths are correlated with the NP density. Furthermore, SEM combined with image analysis has allowed studying the replacement rate of MDD by MUA in SAMs. We took also advantages of the magnetic properties of NPs to evaluate qualitatively the replacement of thiol molecules.