The tightness of retail packaging: A selection of test methods to be used for a wide range of packed products

The tightness of retail packagings and of their closures is of primary importance both for domestic and industrial products. For this reason, a research programme designed to establish proper testing methods for a wide range of ‘packaging + product’ combinations, in order to check their tightness or permeability, was set up. All the available testing methods were reviewed, the most reliable ones selected and their sensitivity determined. More than 200 combinations of ‘packaging + product’ belonging to five families of consumer products were examined and their tightness/permeability problems noted. Finally, specific testing methods were assigned to each combination of ‘packaging + product’. All these examples are currently in use in the packaging laboratory as a guideline for the testing of every kind of packaging.     

Reliability Criteria when Standardizing High Contact Density Connectors

The following paper presents the results of a comparative reliability study conducted on three tpes of high density circular connectors, conforming to NAS 1599, MIL. C. 38 999, and MIL. C. 81 511. After runing numerous relability tests, Souriau has been able to develop a highly successful high density connector.     

Rheological properties of poly(acrylonitrile‐co‐methyl acrylate)/clay nanocomposites prepared via emulsion polymerization

Poly(acrylonitrile‐co‐methyl acrylate)/clay nanocomposites were prepared by free radical polymerization in emulsion using 2‐acrylamido‐2‐methyl‐1‐propanesulphonic acid (AMPS) as a compatibilizer. The resultant nanocomposites were of partially exfoliated morphology despite the variations in clay content among the nanocomposites, as confirmed by transmission electron microscopy and small‐angle X‐ray scattering analysis. Rheological studies of these materials were carried out using parallel plate geometry. The storage modulus increased monotonically with increasing clay content throughout the frequency range studied. However, the neat copolymer, poly(acrylonitrile‐co‐methyl acrylate) and its nanocomposites, exhibited long relaxation behavior as the storage modulus (G′) was greater than the loss modulus (G″) throughout the angular frequency range studied. The complex viscosity of the nanocomposites increased with increasing clay content and they exhibited shear‐thinning behavior. Despite the enhanced rheological properties observed, the copolymer and its nanocomposites underwent structural changes during oscillatory measurements due to cyclization reactions. POLYM. COMPOS., 32:59–66, 2011. © 2010 Society of Plastics Engineers     

Preparation of Polystyrene/Clay Nanocomposites by Free‐Radical Polymerization in Dispersion

Fully exfoliated PS/clay nanocomposites were prepared via FRP in dispersion. Na‐MMT clay was pre‐modified using MPTMS before being used in a dispersion polymerization process. The objective of this study was to determine the impact of the clay concentrations on the monomer conversion, the polymer molecular weight, and the morphology and thermal stability of the nanocomposites prepared via dispersion polymerization. DLS and SEM revealed that the particle size decreased and became more uniformly distributed with increasing clay loading. XRD and TEM revealed that nanocomposites at low clay loading yielded exfoliated structures, while intercalated structures were obtained at higher clay loading.

     

Materials based on maize biopolymers: Effect of flour components on mechanical and thermal behavior

The present study describes the effects of glycerol, relative humidity (RH) and the minor components of corn flour on mechanical and thermal properties of native flour, defatted flour, and starch‐based materials. The kinetic of retrogradation for these different materials were dissimilar. For all samples, strain at break shows a maximum value as a function of RH followed by a decrease, explained by the appearance of water and glycerol clusters. Starch controls the mechanical properties of corn flour‐based material and their variations with temperature and humidity. Lipid and protein have negative effect on mechanical properties of thermoplastic flour toward starch but they did not have a plasticizing effect on the physicochemical behavior of the matrix. T_gs decreased as a result of water content increase.     

3D Macroscopic Architectures from Self‐Assembled MXene Hydrogels

Assembly of 2D MXene sheets into a 3D macroscopic architecture is highly desirable to overcome the severe restacking problem of 2D MXene sheets and develop MXene‐based functional materials. However, unlike graphene, 3D MXene macroassembly directly from the individual 2D sheets is hard to achieve for the intrinsic property of MXene. Here a new gelation method is reported to prepare a 3D structured hydrogel from 2D MXene sheets that is assisted by graphene oxide and a suitable reductant. As a supercapacitor electrode, the hydrogel delivers a superb capacitance up to 370 F g^?1 at 5 A g^?1, and more promisingly, demonstrates an exceptionally high rate performance with the capacitance of 165 F g^?1 even at 1000 A g^?1. Moreover, using controllable drying processes, MXene hydrogels are transformed into different monoliths with structures ranging from a loosely organized porous aerogel to a dense solid. As a result, a 3D porous MXene aerogel shows excellent adsorption capacity to simultaneously remove various classes of organic liquids and heavy metal ions while the dense solid has excellent mechanical performance with a high Young's modulus and hardness.     

Josephson Effect in the Micron and Submicron YBCO Constrictions Fabricated Using the Femtosecond Laser Technique

A femtosecond laser was used successfully to fabricate planar micron and submicron-sized constrictiontype Josephson junctions on YBa₂Cu₃O_7?x thin films. A simple program using G-code (control systems) programming language was written to control the movement of the sample stage during the etching process. The constriction’s geometry was investigated using both atomic force microscopy (AFM) and scanning electron microscopy (SEM). Electrical transport measurements were performed at different temperatures. Shapiro steps were observed and analyzed. The micron-sized constriction shows a linear relationship for the measured critical current against the temperature which is consistent with the behavior of an S–s’–Stype Josephson junction where “S” stands for a bulk superconductive material that is untouched by the laser and “s”’ is superconducting material whose critical temperature is lower than the value of “S” In the case of the narrower submicronsized constriction, the measured critical current dependence with temperature shows an exponential decay, which is consistent with the behavior of the long S–N–Stype Josephson junction where “N” stands for a normal material. A model is proposed to describe the observed behavior by considering the effect of sample heating during the constriction’s fabrication.     

Minimum Initial Marking Estimation of Labeled Petri Nets Based on GRASP Inspired Method (GMIM)

Abstract

This paper deals with the problem of estimating the Minimum Initial Marking (MIM) of Labeled Petri Nets (L-PN). By the observation of a sequence of labels, we determine the set of possible MIMs related to a given L-PN through an approach based on GRASP (Greedy Randomized Adaptive Search Procedure) inspired method – GMIM. The objective is to get the maximum of feasible MIMs by exploring the search space and giving best solutions for real time cyber systems in short time. We consider four basic assumptions during the reasoning: (i) the L-PN structure is known; (ii) for each transition of L-PN, a label is associated, (iii) the label sequence is known, and (iv) all transitions of L-PN are observable. We show the validity and efficiency of our approach by applying the proposed GMIM metaheuristic to two validation examples: Initialization of two parallel machines (example widely cited in literature) and resources allocation in a monitoring problem via mobile robot network.