Fast full‐color reflective display via photoluminescent enhancement

Reflective displays are advantageous in applications requiring low power or daylight readability. However, there are no low‐cost reflective technologies capable of displaying bright colors. By employing photoluminescence to more efficiently use ambient light, we created a prototype display that provides bright, full color in a simple, low‐cost architecture. This prototype includes a novel electrokinetic shutter, a layer that incorporates patterned luminescent red, green, and blue sub‐pixel elements, and a novel optical out‐coupling scheme. The luminescent elements convert otherwise‐wasted portions of the incident spectrum to light in the desired color band, resulting in improved color saturation and lightness. This prototype provides a color gamut that is superior to competing reflective display technologies that utilize color filters in single‐layer side‐by‐side sub‐pixel architectures. The current prototype is capable of switching in <0.5 s; future displays based on an alternative electro‐optic shutter technology should achieve video rate operation. A transflective version of this technology has also been prototyped. The transflective version utilizes its backlight with a power efficiency that is at least three times that of a conventional liquid crystal display. These photoluminescence‐based technologies enable a host of applications ranging from low‐power mobile products and retail pricing signage to daylight readable signage for outdoor advertising segments.     

Development of color in fats stabilized with amino-hexose-reductones

Summary Amino reductones derived from hexoses were evaluated for color development in heated, oxidizing fat systems. Browning was observed to some extent with all the amino-hexose-reductones. The brown color frequently faded upon long heating of the oils. The density of color increased with reductone concentration and varied markedly among the different amino reductones. Morpholino-hexose-reductone could be used in lard and vegetable oils at concentrations up to 0.01% without introducing visually detectable amounts of color. Heating soybean oil solutions of the amino reductones at 100°C. under vacuum slowly destroyed the reductone but did not cause development of color. Air or oxygen was required for color production. Addition of citric acid along with the reductone reduced the amount of color developed. Reductones in fat systems show similarities in browning to reductones in aqueous systems. New considerations for the mechanism of antioxidation by polyphenols and reductones in oils are presented. Presented at the spring meeting, American Oil Chemists’ Society. New Orleans, La., April 28-May 1, 1957.     

FAIRIO: A Throughput-oriented Algorithm for Differentiated I/O Performance

Providing differentiated service in a consolidated storage environment is a challenging task. To address this problem, we introduce FAIRIO, a cycle-based I/O scheduling algorithm that provides differentiated service to workloads concurrently accessing a consolidated RAID storage system. FAIRIO enforces proportional sharing of I/O service through fair scheduling of disk time. During each cycle of the algorithm, I/O requests are scheduled according to workload weights and disk-time utilization history. Experiments, which were driven by the I/O request streams of real and synthetic I/O benchmarks and run on a modified version of DiskSim, provide evidence of FAIRIO’s effectiveness and demonstrate that fair scheduling of disk time is key to achieving differentiated service in a RAID storage system. In particular, the experimental results show that, for a broad range of workload request types, sizes, and access characteristics, the algorithm provides differentiated storage throughput that is within 10% of being perfectly proportional to workload weights; and, it achieves this with little or no degradation of aggregate throughput. The core design concepts of FAIRIO, including service-time allocation and history-driven compensation, potentially can be used to design I/O scheduling algorithms that provide workloads with differentiated service in storage systems comprised of RAIDs, multiple RAIDs, SANs, and hypervisors for Clouds.     

Purity of Aluminum Hydroxide Derived from Triethylaluminum

Aluminum hydroxide obtained by hydrolysis of triethylaluminum is free of uranium and thorium at detection limits of 1 to 9 parts per billion (ppb). Other impurities commonly associated with aluminum oxides are present at low levels (Fe, ∼ 1 ppm; Si, 3 to 6 ppm). When the organoaluminum is intentionally contaminated with an iron salt, purity is restored by a simple distillation.     

Separation and determination of mono-, Di-, and triglycerides in monoglyceride concentrates

Summary Monoglyceride concentrates are quantitatively separated into mono-, di-, and triglyceride components on silica gel columns by an adsorption chromatographic technique. The separated glycerides are determined gravimetrically. The adsorption on silica gel is dependent on the number of hydroxyl groups in the molecule, and the influence of unsaturation and chain length is minimized. Combinations of benzene and ethyl ether are used for elution, thus preventing isomerization, which frequently results when polar solvents such as alcohols are used. The procedure for the chromatographic separation is simple and straightforward. The equipment used is easily obtainable. The silica gel adsorbent requires only adjustment of its water content before use. Mixtures of both saturated and unsaturated glycerides and those having different fatty acid chain length have been separated. Known mixtures have also been analyzed. For a known mixture containing 15% tripalmitin, 45% distearin, and 38% monopalmitin the average deviations from the calculated values were 0.4%, 0.2%, and 0.6%, respectively     

Anomalous Defects and Dynamic Failure of Armor Ceramics

The ballistic performance of state-of-the-art silicon carbide armor material can exhibit a fairly wide variability in certain test configurations, which, it is proposed, may be due to the presence of large (>0.1 mm), rare defects, termed, herein, "anomalous" defects. SiC rubble resulting from ballistic tests was examined, as were quasi-static test samples. Ballistic fragment fracture surfaces revealed large carbonaceous defects that seemed to affect fracture path and mode. Low-strength biaxial flexure samples demonstrated similar defects (>0.1 mm) as failure origins. Carbonaceous defects similar in appearance but smaller in size were also found at the fracture origins of SiC bend bars. Frequently, alumina inclusions were found within the carbonaceous discontinuities. These alumina inclusions may cause the graphitic regions to form during sintering. The random distribution of such large, rare carbonaceous discontinuities from sample-to-sample, as well as batch-to-batch variability, may explain high ballistic variability for SiC armor ceramics.     

A switched emissive transparent display with controllable per‐pixel opacity

An emissive transparent display with per‐pixel opacity employs rapid synchronized switching of a transparent display and transparent backlight between content with a scattering luminous backlight and masks with a clear unlit backlight. A 144 fps transparent LCD panel is used in conjunction with a transparent backlight, controllably diffusive smartglass screen, and optional switching background lighting. The display is capable of producing opaque emissive content on a transparent field for novel transparent display and compact spatial augmented reality applications.     

A constant-time dynamic storage allocator for real-time systems

Dynamic memory allocation has been used for decades. However, it has seldom been used in real-time systems since the worst case of spatial and temporal requirements for allocation and deallocation operations is either unbounded or bounded but with a very large bound. In this paper, a new allocator called TLSF (Two Level Segregated Fit) is presented. TLSF is designed and implemented to accommodate real-time constraints. The proposed allocator exhibits time-bounded behaviour, O(1), and maintains a very good execution time. This paper describes in detail the data structures and functions provided by TLSF. We also compare TLSF with a representative set of allocators regarding their temporal cost and fragmentation. Although the paper is mainly focused on timing analysis, a brief study and comparative analysis of fragmentation incurred by the allocators has been also included in order to provide a global view of the behaviour of the allocators. The temporal and spatial results showed that TLSF is also a fast allocator and produces a fragmentation close to that caused by the best existing allocators.

Optimal infinite scheduling for multi-priced timed automata

This paper is concerned with the derivation of infinite schedules for timed automata that are in some sense optimal. To cover a wide class of optimality criteria we start out by introducing an extension of the (priced) timed automata model that includes both costs and rewards as separate modelling features. A precise definition is then given of what constitutes optimal infinite behaviours for this class of models. We subsequently show that the derivation of optimal non-terminating schedules for such double-priced timed automata is computable. This is done by a reduction of the problem to the determination of optimal mean-cycles in finite graphs with weighted edges. This reduction is obtained by introducing the so-called corner-point abstraction, a powerful abstraction technique of which we show that it preserves optimal schedules. This work has been mostly done while visiting CISS at Aalborg University in Denmark and has been supported by CISS and by ACI Cortos, a program of the French Ministry of Research.