An improved method for magnetic identification and localization of cracks in conductors

A SQUID magnetometer can be used to measure the magnetic field produced by flaws in a two-dimensional, conducting plate carrying a current. Identification of the flaw-induced magnetic field is difficult because of the large magnetic field associated with the edges of the plate and the current in the leads that connect the plate to the power supply. We have developed a technique by which the wire and edge fields can be cancelled prior to mapping the magnetic field. In this technique, a similar unflawed conducting sheet is placed adjacent to the flawed plate, with a connection between the sheet and the plate at one edge, and with the opposite edges of the sheet and of the plate connected to the two conductors of a coaxial cable. Thus, an applied current will flow along one conductor of the cable, across the cancelling sheet, cross into the flawed plate, return along the plate, and then return to the power supply along the other conductor of the coaxial cable. As a result of this geometry, there is no magnetic field from the lead-in wires because they are coaxial, and the magnetic field due to the edges of the plate is cancelled by the opposing magnetic field of the edges in the adjacent sheet. The extent of cancellation is determined primarily by the separation between the plate and the cancelling sheet, by the thickness of the plate, and by macroscopic inhomogeneities in their electrical conductivities.     

The distribution of HBV, HCV and HGV among livers with fulminant hepatic failure of different aetiology

BACKGROUND/AIMS: The aim of the study was to assess the impact factor of HCV and HGV in fulminant hepatic failure. METHODS: The 5'-untranslated regions of HCV RNA and HGV RNA and a segment of the core antigen sequence of HBV were amplified after extracting the nucleic acids from snap-frozen tissue aliquots from explanted livers of 26 consecutive patients undergoing orthotopic liver transplantation for fulminant hepatic failure preoperatively diagnosed as either autoimmune (n=2), HAV/HBV (n=8), toxic (n=4) or aetiologically unknown (n=12). RESULTS: HCV RNA was detected in five of 26 (19.2%) livers with fulminant hepatic failure. All five HCV RNA-positive livers belonged to the group of non-toxic, non-autoimmune liver failure (n=20), three of them were found in the group of liver failure with unknown aetiology (n=12) and two in the group of HBV-associated liver failure (n=7), making an HCV incidence of 25%, 25% and 28.6%, in the different groups, respectively. HGV RNA was detected in 10 of 17 (58.8%) explants and in all four groups of fulminant hepatic failure as defined preoperatively. HBV DNA was identified in six livers of 26 patients (23.1%) with fulminant hepatic failure. Neither HCV RNA nor HBV DNA was detected in the livers of patients with toxic or autoimmune fulminant hepatic failure. CONCLUSIONS: These results indicate that HBV and HCV, but not HGV, play an aetiologic role in fulminant hepatic failure. HCV-positive cases were concentrated either in the group of otherwise unexplained fulminant hepatic failure or in the group of HBV fulminant hepatic failure. HGV-positive cases, on the other hand, were found within all four preoperatively defined groups, indicating a role as cofactor rather than as single aetiologic agent.     

Releasing N jobs to an unreliable machine

In this paper we develop an algorithm that determines the optimal times of releasing N jobs to an unreliable machine. The job processing times are assumed to be random and the machine is subject to random breakdowns. The objective is to minimize the cost incurred by jobs waiting in the system and utilizing the machine. The job flowtime distributions are first derived from which the average flowtimes and the machine completion time are calculated. Efficient computation of the average flowtimes are discussed in detail. The optimization methods and numerical examples are demonstrated.     

Dissociation between the potency and reversibility of the insulinotropic action of two meglitinide analogues

The non-sulphonylurea hypoglycaemic agent repaglinide is about one order of magnitude less potent, in terms of insulinotropic efficiency, than S3075, another meglitinide analogue. In the present study, the effects of these two drugs upon 86Rb outflow, 45Ca efflux and insulin release from prelabelled rat pancreatic islets were investigated in a perifusion system. At a concentration of 10 microM, which is sufficient to evoke a maximal secretory response in incubated islets, both agents inhibited 86Rb efflux from islets perifused in the absence of D-glucose, and stimulated both 45Ca efflux and insulin release from islets perifused in the presence of 6 mM D-glucose. The stimulation of 45Ca efflux from prelabelled islets was suppressed in the absence of extracellular Ca2+. The cationic and secretory response to repaglinide differed, however, from that evoked by S3075, in persisting for at least 20 min after removal of the drug from the perifusion medium, whilst the changes in 86Rb outflow, 45Ca efflux and insulin release caused by S3075 were rapidly reversible. These findings indicate that there is no parallel between the insulinotropic efficiency of distinct meglitinide analogues, and the reversibility of their functional effects. Since a comparable dissociation was recently documented in the case of hypoglycaemic sulphonylureas, the present observations reinforce the view that distinct molecular determinants may rule the relative insulinotropic potency of sulphonylureas and structurally related meglitinide analogues, on one hand, and the reversibility of their biological action, on the other hand.     

Kinetics of catalyzed and non-catalyzed oxidation of soot from a diesel engine

To comply with the new regulations on particulate matter, car manufacturers more and more commonly use diesel particulate filters (DPF). The working of these systems needs to periodically burn soot that has been accumulated during the loading of the DPF. This paper describes the kinetics of the non-catalytic and catalytic oxidation of real diesel soot with oxygen. From these experiments, mechanisms for catalyzed and non-catalyzed soot oxidation have been proposed.     

AgNO<Subscript>3</Subscript> spray tests: advantages,weaknesses, and various applications to quantify chloride ingress into concrete. Part 1: Non-steady-state diffusion tests and exposure to natural conditions

Within the framework of the evaluation and the prediction of chloride-induced corrosion risks, simple and rapid AgNO₃ spray tests can be proposed for various issues. This paper forms the first part of a series. In this first part, the Maultzsch procedure (spraying of 0.1-N AgNO₃ solution + K₂CrO₄) as well as the procedure based on the use of a sole AgNO₃ solution have been investigated on a broad range of concretes. These procedures have also been compared to the Collepardi procedure (spraying of 0.1-N AgNO₃ + fluoresceine). The feasibility of these colorimetric techniques on saturated specimens cast in laboratory, after non-steady-state diffusion tests carried out in various conditions, is discussed. In addition, the results obtained from applying such spray tests in field conditions on cores drilled out from various RC test specimens exposed to a marine environment (tidal zone) and to a road and cold environment (freezing-thawing cycles and spraying of deicing salts) are presented. Colorimetric methods have in particular been applied here to the assessment of the average chloride penetration depth and of its evolution versus time (kinetics). Moreover, the detection threshold of these techniques has been investigated in various environments. The possible sources of discrepancy on the results have been analysed.