Preparation of Phase-Pure M1 MoVTeNb Oxide Catalysts by Hydrothermal Synthesis—Influence of Reaction Parameters on Structure and Morphology

This work presents a detailed investigation of the preparation of MoVTeNbO _x catalysts by hydrothermal synthesis. Phase-pure synthesis of M1 has been achieved applying the metals in a molar ratio Mo/V/Te/Nb = 1/0.25/0.23/0.12. Raman, UV/Vis spectroscopy, and SEM/EDX analysis show that the elements are inhomogeneously distributed in the initial suspension that is formed after mixing the metal salts in an aqueous medium. Iso- and heteropoly anions of molybdenum, free telluric acid as well as supra-molecular polyoxometalate clusters are observed in the solution, whereas all metals have been found in the precipitate. Complete rearrangement of molecular building blocks under hydrothermal conditions is essential for formation of phase-pure materials. Optimized synthesis conditions with respect to temperature and time result in the formation of a precursor consisting of nano-structured M1 characterized by an extended periodic organization in the [001] direction and a fairly homogeneous distribution of the elements. Residual ammonium containing supra-molecular species in the precursor result in the formation of phase mixtures during the subsequent crystallization by heat treatment in inert gas. Phase-pure M1 exhibits a distinct degree of flexibility with respect to the chemical composition that becomes obvious by incorporating Nb not exclusively into pentagonal bi-pyramidal units, but also into octahedral coordinated positions as shown by EXAFS. Anisotropic growth of the needle-like M1 crystals has been observed during the final heat treatment performed at 873–923 K in inert atmosphere disclosing a potential method to control the catalytic properties of MoVTeNbO _x catalysts.     

Determinants of health knowledge: An investigation of age, gender, abilities, personality, and interests.

Ten areas of health knowledge were investigated in 2 studies, 1 of college students (N=169) and 1 of adults from the community (ages 19-70; N=176). Measures assessed knowledge of aging, orthopedic/ dermatological concerns, common illnesses, childhood/early life, serious illnesses, mental health, nutrition, reproduction, safety, and treatment of illness/disease. Significant gender differences favoring women were found for most areas of health knowledge, especially reproduction and early life. Results showed that cognitive ability accounted for the most variance in health knowledge with nonability (personality and interest traits) and demographic variables accounting for smaller but significant amounts of variance across most knowledge domains. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Linear and nonlinear methods for brain-computer interfaces

At the recent Second International Meeting on Brain-Computer Interfaces (BCIs) held in June 2002 in Rensselaerville, NY, a formal debate was held on the pros and cons of linear and nonlinear methods in BCI research. Specific examples applying EEG data sets to linear and nonlinear methods are given and an overview of the various pros and cons of each approach is summarized. Overall, it was agreed that simplicity is generally best and, therefore, the use of linear methods is recommended wherever possible. It was also agreed that nonlinear methods in some applications can provide better results, particularly with complex and/or other very large data sets.     

Finite element simulation of the mechanics of flat contact pad fretting fatigue tests

An understanding into the macro kinetic and kinematic behaviour of fretted surfaces is provided. Making use of a modified version of a previously developed in‐house two‐dimensional elastic–plastic finite element analysis numerically simulates flat contact pad fretting fatigue tests. Basic macro mechanics concepts are adopted to idealise two bodies with rough contact surfaces and loaded at two different sites with arbitrary axial loading profiles. A time scale factor is devised to recognise the earliest candidate out of the events possibly accommodated at each loading increment. The present analysis utilises a relevant experimental set up developed in the Structural Integrity Research Institute of the University of Sheffield as an application. Computational results accurate to within 1.2% and corresponding to one contact pad span and six constant normal loads acting individually with four amplitudes of two sinusoidal axial load cycles are presented. The present computations include (1) the development of the global and local normal and tangential reactions and relative sliding displacement acting along the fretting surfaces and (2) contact pad deformation, generated stress fields and plasticity development within the neighbouring region of the fretted area.     

Mechanochemical modification of the phase diagrams of hexagonal oxide ferrimagnets

Mechanical activation and fine comminution of hexagonal oxide ferrimagnets by milling to a nanocrystalline state (ultradisperse powder), followed by sintering, leads to significant changes in the phase diagram, the temperature of synthesis, and the magnetic properties as compared to those of the materials obtained by traditional ceramic technology. The final material structure is formed through “chemical assembly”—sequential consolidation of nanodimensional particles (structure-forming blocks)—rather than through the formation of low-temperature phases and their decomposition with increasing temperature.     

An analysis of the Slapper worm

We can prove that the Slapper is a variation of the Apache Scalper worm by comparing the source code. Modifications introduced in the Slapper worm improved the robustness and efficiency of its predecessor's simplistic P2P networking capabilities. Slapper's author also removed certain features from the original-either because they were redundant or to reduce the perception that it was a tool developed to cause direct harm to networks. Among the features the author removed from the Slapper were capabilities to update itself from a remotely specified Web server (perhaps to prevent someone else from replacing this version with a new one), to attack and infect a host specified with a controlling program, and to send spans. Interestingly, the ability to execute distributed denial-of-service attacks on a controlling user's behalf was kept intact. Slapper's author attempted to make communications with a remote controlling program as stealthy and untraceable as possible by removing several commands to query status and obtain feedback from Slapper nodes.     

Mycological survey for potential aflatoxin and ochratoxin producers and their toxicological properties in harvested Brazilian black pepper.

A mycological survey was carried out on 115 samples of whole dried black pepper seeds, from two main production regions of Brazil (Pará and Espírito Santo). A high incidence of contamination was verified in both regions when 99.1% of the samples showed filamentous fungi contamination. A total of 497 species of nine different genera were isolated (Aspergillus, Eurotium, Rhizopus, Penicillium, Curvularia, Cladosporium, Absidia, Emericella and Paecilomyces). The genus Aspergillus was the predominant (53.5%) followed by species from the Eurotium genus (24.5%). Eurotium chevalieri (16.4%) was the most predominant species followed by A. flavus (14.6%) present on 55 samples of black pepper (47.8%) analysed. Twenty-five samples (21.7%) were contaminated with aflatoxigenic strains of A. flavus and A. parasiticus. In relation to the types of aflatoxins produced by mycotoxigenic strains, it was observed that 25 strains (44.6%) of 56 isolated of A. flavus produced aflatoxins. From 12 samples, A. ochraceus species were isolated in low frequency (3.5%). Two strains of A. ochraceus from 16 isolated were producers of ochratoxin A. With respect to the aflatoxins and ochratoxin A natural contamination, none of the samples presented detectable levels of these mycotoxins using thin-layer chromatographic analysis.     

The effect of the scale of horizontal subsurface flow constructed wetlands on flow and transport parameters.

Horizontal subsurface flow constructed wetlands have proven their efficiency in treating wastewater and removing the pollutants of concern. Treatment efficiency depends on the wastewater residence time, which is a function of the hydraulic loading and the physical conditions of the constructed filter system, which can be described with effective parameters such as: hydraulic conductivity, porosity, dispersivity etc. Because spatial variability is often scale dependent, these effective parameters may be affected by the scale of the system being studied. In this paper the results of tracer experiments in constructed filters using saturated horizontal flow at three scales (small and medium lab scales and full-scale system) using the same filter media is reported. Light-weight aggregate (filter media termed Filtralite-P) was used at all scales. Increasing the scale was associated with increasing dispersivity, meanwhile hydraulic conductivity experienced dramatic reduction and variation by increasing the examined scale. Observed changes in the hydraulic parameters indicate that heterogeneity at different scales should be taken into account when the performance of LWA filters are evaluated from small-scale experiments.