Biofiltration of toluene in the absence and the presence of ethyl acetate under continuous and intermittent loading

BACKGROUND: Two peat biofilters were used for the removal of toluene from air for one year. One biofilter was fed with pure toluene and the other received 1:1 (by weight) ethyl acetate:toluene mixture. RESULTS: The biofilters were operated under continuous loading: the toluene inlet load (IL) at which 80% removal occurred was 116 g m^?3 h^?1 at 57 s gas residence time. Maximum elimination capacity of 360 g m^?3 h^?1 was obtained at an IL of 745 g m^?3 h^?1. The elimination of toluene was inhibited by the presence of ethyl acetate. Intermittent loading, with pollutants supplied for 16 h/day, 5 days/week, did not significantly affect the removal efficiency (RE). Biomass was fully activated in 2 h after night closures, but 6 h were required to recover RE after weekend closures. Live cell density remained relatively constant over the operational period, while the dead cell fraction increased. Finally, a 15 day starvation period was applied and operation then re‐started. Performance was restored with similar re‐acclimatization period to that after weekend closures, and a reduction in dead cell fraction was observed. CONCLUSION: This study demonstrates the capacity of the system to handle intermittent loading conditions that are common in industrial practices, including long‐term starvation. Copyright © 2008 Society of Chemical Industry     

Longitudinal analysis of the relationship between symptoms and quality of life in veterans treated for posttraumatic stress disorder.

This study examined how change in posttraumatic stress disorder (PTSD) symptoms relates to change in quality of life. The sample consisted of 325 male Vietnam veterans with chronic PTSD who participated in a randomized trial of group psychotherapy. Latent growth modeling was used to test for synchronous effects of PTSD symptom change on psychosocial and physical health-related quality of life within the same time period and lagged effects of initial PTSD symptom change on later change in quality of life. PTSD symptoms were associated with reduced quality of life before treatment. There were synchronous effects of symptom change on change in quality of life but no significant lagged effects. Results indicate the importance of measuring quality of life in future investigations of PTSD treatment. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Reading and skimming from computer screens and books: the paperless office revisited?

Past research has demonstrated that reading efficiency is lower from the standard computer displays of the 1980s than from paper. In the present experiments, subjects read or skimmed stories, sometimes from a high-quality CRT (cathode ray tube) and sometimes from a book. Skimming was 41% slower from the CRTs than from the book. Possible reasons for this finding are discussed. Reading speed and comprehension were equivalent for the high-quality CRTs and the book. The paperless office may be imminent after all.     

CYP154C5 Regioselectivity in Steroid Hydroxylation Explored by Substrate Modifications and Protein Engineering**

CYP154C5 from Nocardia farcinica is a P450 monooxygenase able to hydroxylate a range of steroids with high regio- and stereoselectivity at the 16α-position. Using protein engineering and substrate modifications based on the crystal structure of CYP154C5, an altered regioselectivity of the enzyme in steroid hydroxylation had been achieved. Thus, conversion of progesterone by mutant CYP154C5 F92A resulted in formation of the corresponding 21-hydroxylated product 11-deoxycorticosterone in addition to 16α-hydroxylation. Using MD simulation, this altered regioselectivity appeared to result from an alternative binding mode of the steroid in the active site of mutant F92A. MD simulation further suggested that the entrance of water to the active site caused higher uncoupling in this mutant. Moreover, exclusive 15α-hydroxylation was observed for wild-type CYP154C5 in the conversion of 5α-androstan-3-one, lacking an oxy-functional group at C17. Overall, our data give valuable insight into the structure–function relationship of this cytochrome P450 monooxygenase for steroid hydroxylation.     

In vivo aging of gutta‐percha dental cone

Gutta‐percha cone is the most widely used material for root canal filling. The in vivo aging of this cone focus on the degradation of its main organic component, trans‐1,4‐polyisoprene, was studied. Aged cones (25 samples) from 2 to 30 years of root canal filling were extracted from different patients in the occasion of retreatment by mechanical way. The information about the aging time was given by the patients. Gel‐permeation chromatography (GPC) and infrared spectroscopy (FTIR) were the analytical techniques used. Polyisoprene degrades with time of aging, but in a slow process. Decrease in polymer molar mass from 5.7 × 10⁵ to 1.7 × 10⁵ g/mol was observed in polyisoprene from cone after 30 years of root canal filling and inside a noninfected tooth. In tooth with caries and periodontal infection, the decrease in molar mass is higher (4.6 × 10⁴ g/mol in cone with 10 years of aging). The production of carbonyl and hydroxyl groups in the aged material indicates that the process is oxidative, even in closed teeth. In these cases, the oxygen could be provided from tissue fluid. The degradation mechanism is complex and depends on many factors, besides time of root canal filling. The dental problem caused by the aging could be the production and migration of cytotoxic substances to periodontal ligament and the reduction on the canal sealing property due to the polymer weight loss. Both of them could contribute to the root canal treatment failure. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100:4082–4088, 2006     

The effect of composition on the properties of nylon 612 copolymers

The series of nylon 612 copolymers was synthesized from caprolactam (C) and laurolactam (L) at 145°C. The 50/50 C/L molar ratio copolymer was found to have the minimum melting temperature (T_m ) for the series. The glass transition temperatures (T_g 's) of the copolymers were affected by the crystallinity of the copolymers. The T_g was at a minimum for the 50/50 copolymer for crystalline samples. However, for amorphous samples there was a decrease in T_g with increasing L content. Percent crystallinity was determined by differential scanning calorimetry and X-ray techniques. It was found that the degree of crystallinity was at a minimum for copolymers of 70/30 to 40/60 C/L ratios. Coefficients of linear thermal expansion (CLTE) were obtained for the copolymers at 10°C intervals from 20 to 70°C for dry and from 20 to 50°C for samples conditioned at 50% relative humidity and 50°C. The dry samples gave lower initial values, but had a greater temperature dependence than the conditioned samples. As expected, the CLTE was found to be lowest for samples exhibiting the highest crystallinity. The tensile strengths and moduli decreased rapidly with increasing L up to the 70/30 C/L ratio after which they remained relatively constant. Elongations reached maximums between 70/30 and 40/60 C/L ratios. An inverse relationship was found between crystallinity and impact strength.     

Comparative analysis of methods for determining the metabolic rate in order to provide a balance between man and the environment

The incorrect determination of metabolic rate can be linked to discrepancies between the model of the PMV (Predicted Mean Vote) and real thermal sensation collected in field studies. Aiming to improve the correlation of the PMV model and the real thermal sensation, this work established new values for the metabolic rate: one way being called “calculated” using Newton's Method and the other called "measured" using a metabolic analyzer. Welder's activities were evaluated, through the measurements of environmental and personal variables. New values of metabolic rate were determined for this activity. The values found for the calculated form and the measured one were, respectively, 178.63 and 145.46 W/m², different from the range provided by the table of ISO 8996 (2004) for this activity (75–125 W/m²). In order to verify which of the values of the metabolic rate was closer to the real thermal sensation of PMV, a linear regression was made between the PMV and the real thermal sensation in three ways: S × PMV_tabulated (R² = 0.1749), S × PMV_calculated (R ² = 0.7481) and S × PMV_measured (R² = 0.7854). It was found that the values measured by the instrument gave a higher coefficient of determination which was chosen for the correction of the table. The correction of the table provides a value of M_predicted, that is a value of metabolic rate that corrects the values provided by the tables of ISO 8996 (2004), by means of a correction coefficient. For the welder's activities in a metal-mechanics industry, tabulated values can be multiplied by the correction coefficient 1.4648 in order to minimize inaccuracies. The PMV_predicted, obtained through the M_predicted, when related to the actual thermal sensation, provides a coefficient of determination of 0.7511, thereby improving the model of the PMV.     

Controlling the phase stability of polymer blends through the introduction of impenetrable interfaces

In this work, the effect of the introduction of modified solid surfaces into polymer blends on the phase‐separation process was investigated. Glass fibers with surfaces having different chemistries were introduced into polystyrene–poly(methyl methacrylate) blends. The glass fibers used either had fully hydrated surfaces or had surfaces covered with a random copolymer, poly(styrene‐co‐methyl methacrylate). The copolymer was synthesized by free‐radical polymerization of styrene and methyl methacrylate in the presence of previously vinyl silane‐treated glass fibers. The copolymerization and grafting procedures were investigated by FTIR and thermal analysis. Blends containing the fibers were studied using FTIR microscopy and optical microscopy. FTIR microscopy results showed that the composition of the phases in the blends was shifted by using fibers with different surface chemistries. Fibers with grafted copolymers were capable of narrowing the immiscibility region in the phase diagram, while fully hydrated fibers were able to expand the gap. It was proposed that interfacial interactions regulated by a hydrophilic–hydrophobic type of forces were responsible for guiding the described phase‐separation process. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1619–1627, 2003     

Methanol Selective Oxidation to Formaldehyde over Iron-Molybdate Catalysts

This review deals with the important industrial reaction of formaldehyde manufacture by methanol oxidation over iron molybdate catalysts. Detailed reference is made to the used catalyst, preparation techniques (coprecipitation, sol-gel like, mechanical mixing, etc.) including unsupported and supported catalysts, promoters and characterization methods. The controversial active phase assignment (stoichiometric versus Mo rich iron molybdate) is discussed. The proposed reaction mechanisms and kinetic laws for the main and side reactions are examined. The catalyst deactivation processes are reviewed and the role of Mo excess on these processes is underlined. Finally conclusions and perspectives are presented.     

Well-defined polymer precursors synthesized by RAFT polymerization of N,N-dimethylacrylamide/N-acryloxysuccinimide: random and block copolymers

N,N-dimethylacrylamide (DMA) and N-acryloxysuccinimide (NAS) were copolymerized by the reversible addition–fragmentation chain transfer (RAFT) polymerization technique, to obtain random and block copolymer precursors onto which different side-groups may be statistically grafted via the reactive NAS units. These reactive copolymers have interesting applications in various fields such as coatings and paints, water purification and biology. Random poly(DMA-co-NAS) copolymer chains were synthesized with a 75/25 molar ratio, high conversion, an excellent molecular weight (MW) control from 5000 to 130 000 g mol⁻¹, and low polydispersity index (M_w/M_n<1.1). Poly(DMA-b-NAS) block copolymers were synthesized by a two step method, in which a poly(DMA) homopolymer was prepared first and then used as macro-chain transfer agent to polymerize NAS. For example, a poly(DMA-b-NAS) sample was obtained with an average molecular weight of 44 300/7400 g mol⁻¹ corresponding to 447 DMA and 44 NAS units. Such block copolymers had not yet been synthesized by any controlled polymerization technique. They can be used to prepare polymers with exactly the same backbone and an increasing number of different side groups (e.g. hydrophobic, ionic or fluorescent).