The effect of composition on the properties of nylon 612 copolymers

The series of nylon 612 copolymers was synthesized from caprolactam (C) and laurolactam (L) at 145°C. The 50/50 C/L molar ratio copolymer was found to have the minimum melting temperature (T_m ) for the series. The glass transition temperatures (T_g 's) of the copolymers were affected by the crystallinity of the copolymers. The T_g was at a minimum for the 50/50 copolymer for crystalline samples. However, for amorphous samples there was a decrease in T_g with increasing L content. Percent crystallinity was determined by differential scanning calorimetry and X-ray techniques. It was found that the degree of crystallinity was at a minimum for copolymers of 70/30 to 40/60 C/L ratios. Coefficients of linear thermal expansion (CLTE) were obtained for the copolymers at 10°C intervals from 20 to 70°C for dry and from 20 to 50°C for samples conditioned at 50% relative humidity and 50°C. The dry samples gave lower initial values, but had a greater temperature dependence than the conditioned samples. As expected, the CLTE was found to be lowest for samples exhibiting the highest crystallinity. The tensile strengths and moduli decreased rapidly with increasing L up to the 70/30 C/L ratio after which they remained relatively constant. Elongations reached maximums between 70/30 and 40/60 C/L ratios. An inverse relationship was found between crystallinity and impact strength.     

Comparative analysis of methods for determining the metabolic rate in order to provide a balance between man and the environment

The incorrect determination of metabolic rate can be linked to discrepancies between the model of the PMV (Predicted Mean Vote) and real thermal sensation collected in field studies. Aiming to improve the correlation of the PMV model and the real thermal sensation, this work established new values for the metabolic rate: one way being called “calculated” using Newton's Method and the other called "measured" using a metabolic analyzer. Welder's activities were evaluated, through the measurements of environmental and personal variables. New values of metabolic rate were determined for this activity. The values found for the calculated form and the measured one were, respectively, 178.63 and 145.46 W/m², different from the range provided by the table of ISO 8996 (2004) for this activity (75–125 W/m²). In order to verify which of the values of the metabolic rate was closer to the real thermal sensation of PMV, a linear regression was made between the PMV and the real thermal sensation in three ways: S × PMV_tabulated (R² = 0.1749), S × PMV_calculated (R ² = 0.7481) and S × PMV_measured (R² = 0.7854). It was found that the values measured by the instrument gave a higher coefficient of determination which was chosen for the correction of the table. The correction of the table provides a value of M_predicted, that is a value of metabolic rate that corrects the values provided by the tables of ISO 8996 (2004), by means of a correction coefficient. For the welder's activities in a metal-mechanics industry, tabulated values can be multiplied by the correction coefficient 1.4648 in order to minimize inaccuracies. The PMV_predicted, obtained through the M_predicted, when related to the actual thermal sensation, provides a coefficient of determination of 0.7511, thereby improving the model of the PMV.     

Well-defined polymer precursors synthesized by RAFT polymerization of N,N-dimethylacrylamide/N-acryloxysuccinimide: random and block copolymers

N,N-dimethylacrylamide (DMA) and N-acryloxysuccinimide (NAS) were copolymerized by the reversible addition–fragmentation chain transfer (RAFT) polymerization technique, to obtain random and block copolymer precursors onto which different side-groups may be statistically grafted via the reactive NAS units. These reactive copolymers have interesting applications in various fields such as coatings and paints, water purification and biology. Random poly(DMA-co-NAS) copolymer chains were synthesized with a 75/25 molar ratio, high conversion, an excellent molecular weight (MW) control from 5000 to 130 000 g mol⁻¹, and low polydispersity index (M_w/M_n<1.1). Poly(DMA-b-NAS) block copolymers were synthesized by a two step method, in which a poly(DMA) homopolymer was prepared first and then used as macro-chain transfer agent to polymerize NAS. For example, a poly(DMA-b-NAS) sample was obtained with an average molecular weight of 44 300/7400 g mol⁻¹ corresponding to 447 DMA and 44 NAS units. Such block copolymers had not yet been synthesized by any controlled polymerization technique. They can be used to prepare polymers with exactly the same backbone and an increasing number of different side groups (e.g. hydrophobic, ionic or fluorescent).     

Characterizing peers communities and dynamics in a P2P live streaming system

Despite the large number of works devoted to understand P2P live streaming applications, most of them put forth so far rely on characterizing the static view of these systems. In this work, we characterize the SopCast, one of the most important P2P live streaming applications. We focus on its dynamics behavior as well as on the community formation phenomena. Our results show that SopCast presents a low overlay topology diameter and low end-to-end shortest path. In fact, diameter is smaller than 6 hops in almost 90 % of the observation time. More than 96 % of peers’ end-to-end connections present only 3 hops. These values combined may lead to low latencies and a fast streaming diffusion. Second, we show that communities in SopCast are well defined by the streaming data exchange process. Moreover, the SopCast protocol does not group peers according to their Autonomous System. In fact, the probability that a community contains 50 % of its members belonging to the same AS (when we observe the largest AS of our experiments) is lower then 10 %. Peers exchange more data with partners belonging to the same community instead of peers inside the same AS. For the largest AS we have, less than 18 % of peer traffic has been exchanged with another AS partners. Finally, our analysis provides important information to support the future design of more efficient P2P live streaming systems and new protocols that exploit communities’ relationships.     

Using Courseware Discussion Boards to Engage Graduate Students in Online Library Workshops

ABSTRACT

Librarians at Oregon State University (OSU) Libraries used the discussion board features of Blackboard courseware to create an interactive experience for graduate students at a distance who could not attend the on-campus “Literature Review Workshops.” These recently developed workshops have been extremely popular with graduate students across the disciplines and have generated a growing demand from distance education graduate students and faculty to offer similar information online. Reluctant to simply deliver content via an online tutorial, librarians sought to duplicate the workshop atmosphere by making the sessions available for a short time-period online, asking participants to respond to discussion questions at specific points in the workshop, and offering audio-mediated online demonstrations of tools and resources. Student feedback and follow-up requests for more workshops support the perception that this approach offered a rewarding learning experience that addressed their specific adult learning needs.     

Line patterning of graphite and the fabrication of cheap, inexpensive, “throw-away” sensors

A new simple method (“line patterning technique”) using only standard office equipment is described whereby clearly defined, electrically conducting patterns of graphite can be deposited on polymer (plastic) or paper substrates. The properties of the conductive patterns have been characterized by electrical conductivity and SEM measurements. Sensors were constructed by using interdigitated patterns of graphite deposited on plastic and paper, and coated with a thin film of conducting electronic polymer, e.g. polyaniline emeraldine salt.     

New approach for optimizing the interpretation and representation of the degree of historical-archaeological evidence in the virtual reconstructions

Virtual Reality - Virtual reconstruction is defined as the visual recovery of a building or object through the creation of a three-dimensional model of the asset to be reconstructed, in a...     

Simple procedures of choice in multicriteria problems without precise information about the alternatives’ values

The additive model of multiattribute value theory is widely used in multicriteria choice problems. But often it is not easy to obtain precise values for the scaling weights or the alternatives’ value in each function. Several decision rules which require weaker information, such as ordinal information, have been proposed to select an alternative under these circumstances. We propose new decision rules and test them using Monte-Carlo simulation, considering that there is ordinal information both on the scaling weights and on the alternatives’ values. Results show the new rules constitute a good approximation. We provide guidelines about how to use these rules in a context of selecting a subset of the most promising alternatives, considering the contradictory objectives of keeping a low number of alternatives yet not excluding the best one.