Advances in Ground Transmitters for the NASA Deep Space Network

The Deep Space Network (DSN), managed by the Jet Propulsion Laboratory for NASA, is equipped with multiple microwave transmitters ranging in average radiated power from 200 W to 400 kW. The transmitters are used for routine or emergency communication with spacecraft, for navigation, and for radio science tasks. The latest advances in transmitter engineering were implemented in a new generation of 20-kW dual-band transmitters developed for the DSN 34-m beam waveguide antennas. Innovations include additional X-band communication capability for near Earth missions, new c, automated calibration, improved and expanded computerized monitoring and diagnostics, reduced cabling, and improved maintainability. The innovations were very beneficial for the DSN ldquooverloadrdquo during the Mars 2003/2004 missions and will benefit other missions throughout the next decade. This paper describes the current design of the new transmitters and possible future developments.     

Mechatronic Design Quotient as the Basis of a New Multicriteria Mechatronic Design Methodology

A concurrent, integrated, and multicriteria methodology is presented for the conceptual design of mechatronic systems. It uses an evaluation model called mechatronic design quotient (MDQ) to facilitate decision-making in the design process. A nonlinear fuzzy integral is used for the aggregation of criteria in MDQ, thereby accommodating possible correlations among them. The performance of the developed methodology is validated by applying it to an industrial fish cutting machine called Iron Butcher-an electromechanical system that falls into the class of mixed or multidomain systems     

Nanoelectronic SET-based core for network-on-chip architectures

Nanoelectronics is a very promising step the world of electronics is taking. It is proved to be more efficient than the microelectronic approaches currently in use, mainly in terms of area and energy management. A Single-Electron Transistor (SET) is capable of confining electrons to sufficiently small dimensions, so that the quantization of both their charge and their energy is easily observable, making the SET's quantum mechanical devices. These features should allow building chips with a number of devices orders of magnitude greater than indicated by the roadmap still respecting area and power consumption restrictions. In this sense, Tera Scale Integrated (TSI) systems can be feasible in the future. A digital module, such as an arithmetic logic unit, completely implemented with SETs has already been proposed and validated by simulation. In this work a completely SET based network-on-chip (NoC) nanoelectronic core is proposed. Furthermore, a simple NoC architecture based on that nanoelectronic core is also evaluated. It is shown that the SET-based NoC has a promising performance considering parameters such as power consumption, area and clock frequency. A simple comparison of mesh NoC chip prototypes is shown.     

A design paradigm for mechatronic systems

Concepts of mechatronics are applicable in the design of complex and multi-domain dynamic systems. This paper presents an approach based on the mechatronic design quotient (MDQ) for systematic design of a mechatronic system. Traditional procedures of design are hierarchically separated into topological design and parametric design. Extending this concept, an MDQ may be “structured” into a multi-layered hierarchy. The approach and significance of the application of MDQ in mechatronic design are indicated using illustrative examples.     

Metrics and Criteria for Quality Assessment of Testable Hw/Sw Systems Architectures

The purpose of this paper is to present a novel methodology for assessing the quality of architecture solutions of hw/sw systems, with particular emphasis on testability. Criteria and metrics for quality assessment are proposed and used to assist the design team in selecting a best-fitted architecture that satisfies not only functional requirements, but also test requirements. The methodology makes use of object-oriented modeling techniques. Near-optimum clustering of methods and attributes into objects is carried out, in such a way that objects with moderate complexity, low coupling and high functional autonomy, result. The main features of the methodology are ascertained through a case study.     

Constant-frequency sliding-mode and PI linear controllers for powerrectifiers: a comparison

Constant-frequency sliding-mode and linear proportional integral (PI) cascaded controllers (internal current loop and external output voltage control loop) for 12-pulse thyristor rectifiers are designed, using new models and convenient assumptions, and their performances compared. The use of sliding-mode control on line-commutated power converters implies the use of fixed-frequency sliding-mode design, originating steady-state errors. These are eliminated using a higher order switching function, with fourth-order Bessel polynomial coefficients, to minimize the response time and to eliminate the overshoot in the reaching mode. Comparisons are made using simulations (MATLAB/SIMULINK blocks) and experimental results. The sliding-mode controllers, as well as the PI controllers, need almost the same hardware and present no steady-state errors and no output voltage overshoots. Besides allowing a faster dynamics than the PI controllers, the proposed sliding-mode approach provides a new, nonlinear theoretical frame for solving the control problem of power rectifiers with output filters     

A buck quadratic PWM soft-switching converter using a single activeswitch

High-switching frequency associated with soft commutation techniques is a trend in switching converters. Following this trend, a buck pulsewidth modulation (PWM) converter is presented. The DC voltage conversion ratio of this converter has a quadratic dependence on duty cycle, providing a large stepdown. This new buck quadratic PWM soft-single-switched converter, having only a single active switch, provides a high efficient operating condition for a wide load range at high-switching frequency. In order to illustrate the operating principle of this new converter, a detailed study including theoretical analysis, relevant equations and simulation, and experimental results is carried out     

A New Hand-Held Microsystem Architecture for Biological Analysis

This paper presents a hand-held microsystem based on new fully integrated magnetoresistive biochips for biomolecular recognition (DNA hybridization, antibody antigen interaction, etc.). Magnetoresistive chip surfaces are chemically treated, enabling the immobilization of probe biomolecules such as DNA or antibodies. Fluid handling is also integrated in the biochip. The proposed microsystem not only integrates the biochip, which is an array of 16times16 magnetoresistive sensors, but it also provides all the electronic circuitry for addressing and reading out each transducer. The proposed architecture and circuits were specifically designed for achieving a compact, programmable and portable microsystem. The microsystem also integrates a hand-held analyzer connected through a wireless channel. A prototype of the system was already developed and detection of magnetic nanoparticles was obtained. This indicates that the system may be used for magnetic label based bioassays     

The interplay of electronic structure,molecular orientation and charge transport in organic semiconductors: Poly(thiophene) and poly(bithiophene)

Ultrathin films of poly(thiophene) (PT) and poly(bithiophene) (PBT) were prepared by electrochemical route using ionic liquid (BFEE) as medium and electrolyte. Distinct morphologies and electrical properties were observed in these materials. To evaluate its response in photovoltaics, these films were used as active layer in bilayer geometry solar cells with the electron acceptor molecule C₆₀. The best performance was observed for PT films. In order to probe the differences in molecular dynamics and structural order, ultrafast electron dynamics in the low-femtosecond regime was evaluated by resonant Auger spectroscopy using the core–hole clock method at the sulfur K absorption edge. Electron delocalization times for the different polymeric films were derived as a function of the excitation energy. Photoabsorption measurements were conducted and molecular orientation derived. These results corroborated with the morphology found for these films and thus the performance of PT and PBT in the devices, and with the proposed conduction mechanism.     

Network efficiency maximization exploiting WCDMA spectrum nature for enhancement of D2D underlaying communications

In this paper, devices to devices communications underlaying cellular network techniques are proposed as an alternative to maximize spectral efficiency. This gain is obtained by the reuse of spectrum when different links are simultaneously established using the same resources. The cost of this technique is additional interference in cellular networks. The techniques presented in this paper propose a coordinated power control mechanism to allow resource sharing with low impact on cellular subscribers. Solutions are addressed for both OFDMA and WCDMA networks taking into account the unique requirements of both networks. In both situations, WCDMA–OFDMA coexistence is exploited and analyzed, using the nature of WCDMA spectrum and its robustness against narrowband interference thereby improving the probability of obtaining the sharing of cellular resources. For OFDM networks, WCDMA is used for mitigating the interference of cellular users and to obtain considerable gain in probability of reuse. For WCDMA networks, OFDMA is used to obtain higher throughput using the side frequencies of the spectrum where the cellular signal power is lower compared to the central frequencies.