Evaluation of surface/interface quality,microstructure and mechanical properties of hybrid additive-subtractive aluminium parts

A disadvantage of selective laser melting (SLM) processes for the manufacture of large parts is their slow build time per unit volume. A hybrid route is to generate core simple shapes traditionally, for example by machining, followed by adding final features by SLM. Here the mechanical integrity of such hybrid parts is studied, choosing the building of AlSi10Mg by SLM on a machined AA6082 base, in the shape of a tensile test piece, as a simple example. These materials are chosen for their relevance to lightweight parts. As-built parts fail at the SLM/machined interface but standard heat treatments transfer failures to the machined material. Optimised SLM processing conditions and microstructures of the SLM and interfacial regions are reported.     

Windshield recycling focused on effective separation of PVB sheet

The study is focused on windshield recycling process resulting in poly(vinyl butyral) (PVB) sheets with very low amout of remain glass particles. PVB sheets were obtained from worldwide manufacturer DuPont and then they were laminated by standard autoclaving process. One sample of PVB sheet was modified by multi‐functional organic acid in order to compare various levels of adhesion. Three‐stage technology was proposed for recycling PVB sheets. In the first‐stage laminated safety glass was mechanically cracked. In the second‐stage the adhesion reduction to minimal degree was followed by chemical‐physical assisted separation. It causes self‐release of the glass out of the PVB sheet. The third‐stage was mechanical peeling of the remaining glass from the PVB sheet which completed the recycling process. The optimal process conditions for the most effective delamination process were found. Delamination technology produces PVB sheet with minimal residual glass content (up to 300 ppm) and minimal change in PVB sheet properties. Described recycling technology is ecologically friendly (the effluent is fully recyclable as well) and could reduce the worldwide problem with windshield waste disposal. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39879.     

Spontaneous boiling up as a specific relaxation process in polymer–solvent systems

The phenomenon of spontaneous bubble nucleation in extremely supersaturated (superheated) polymer–solvent systems has been studied experimentally. Spontaneous boiling-up temperatures T^* for polystyrene and poly(ethylene glycol) solutions in a number of solvents have been measured at different values of pressure p and weight fraction of polymer c by the pulse heating method. The heating rate Ṫ varied from 10⁵ to 10⁷ K/s. For all systems studied, the values of T^* have been found to increase with increasing p and c. The T^*(p, c) dependence is discussed with the use of the data on the degree of compatibility of components. The peculiarities of polymeric solutions manifest themselves in the region c → 1, as follows: (i) an abrupt increase (by 1–2 orders of magnitude) in the slope of the T^*(c) dependence, and (ii) the appearance of the dependence of T^* values on the heating rate. Our approach to the interpretation of this result assumes a change in the initial composition of a solution in the course of heating due to polymer decomposition. An example of the extended phase diagram of a polymer–solvent system including the kinetic surface of T^*(p, c) is given. © 1996 John Wiley & Sons, Inc.     

Anticonvulsive Effects and Pharmacokinetic Profile of Cannabidiol (CBD) in the Pentylenetetrazol (PTZ) or N-Methyl-D-Aspartate (NMDA) Models of Seizures in Infantile Rats

In spite of use of cannabidiol (CBD), a non-psychoactive cannabinoid, in pediatric patients with epilepsy, preclinical studies on its effects in immature animals are very limited. In the present study we investigated anti-seizure activity of CBD (10 and 60 mg/kg administered intraperitoneally) in two models of chemically induced seizures in infantile (12-days old) rats. Seizures were induced either with pentylenetetrazol (PTZ) or N-methyl-D-aspartate (NMDA). In parallel, brain and plasma levels of CBD and possible motor adverse effects were assessed in the righting reflex and the bar holding tests. CBD was ineffective against NMDA-induced seizures, but in a dose 60 mg/kg abolished the tonic phase of PTZ-induced generalized seizures. Plasma and brain levels of CBD were determined up to 24 h after administration. Peak CBD levels in the brain (996 ± 128 and 5689 ± 150 ng/g after the 10- and 60-mg/kg doses, respectively) were reached 1–2 h after administration and were still detectable 24 h later (120 ± 12 and 904 ± 63 ng/g, respectively). None of the doses negatively affected motor performance within 1 h after administration, but CBD in both doses blocked improvement in the bar holding test with repeated exposure to this task. Taken together, anti-seizure activity of CBD in infantile animals is dose and model dependent, and at therapeutic doses CBD does not cause motor impairment. The potential risk of CBD for motor learning seen in repeated motor tests has to be further examined.     

Viscosity of glass-forming melt at the bottom of high-level waste melter-feed cold caps: Effects of temperature and incorporation of solid components

During the final stages of conversion of melter feed (glass batch) to molten glass, the glass-forming melt becomes a continuous liquid phase that encapsulates dissolving solid particles and gas bubbles that produce primary foam at the bottom of the cold cap (the reacting melter feed in an electric glass-melting furnace). The glass-forming melt viscosity plays a dominant role in primary foam formation, stability, and eventual collapse, thus affecting the rate of melting (the glass production rate per cold-cap area). We have traced the glass-forming melt viscosity during the final stages of feed-to-glass conversion as it changes in response to changing temperature and composition (resulting from dissolving solid particles). For this study, we used high-level waste melter feeds—taking advantage of the large amount of data available to us—and a variety of experimental techniques (feed expansion test, evolved gas analysis, thermogravimetric analyzer-differential scanning calorimetry, X-ray diffraction, and viscometer). Starting with a relatively low value at the moment when the melt connects, melt viscosity reached maximum within the primary foam layer and then decreased to its final melter operating temperature value. At the cold-cap bottom—the boundary between the primary foam layer and the thermal boundary layer—where physicochemical reactions of a melter feed influence the driving force of the heat transfer from the melt to the cold cap, the melt viscosity affects the rate of melting predominantly through its effect on the temperature at which primary foam is collapsing.     

Phase diagram of the Li2SO4–Na2SO4 system

The thermal analysis and X-ray powder diffraction studies of the Li₂SO₄–Na₂SO₄ system, including the high-temperature X-ray diffraction technique, have elucidated four phases of variable composition: three solid solutions based on the α-Li₂SO₄, α-Na₂SO₄, and α-LiNaSO₄ high-temperature polymorphs, and a low-temperature β-LiNaSO₄ phase. α-Na₂SO₄-Base solid solution disintegrates into two phases via a monotectoid phase transformation. It is quite probable that the monotectoid process is related to the conversion of the second-order phase transition to the first-order phase transition.     

Chitosan-based fiber-sponge materials as a promising tool for microalgae harvesting from Lake Baikal

Mass eutrophication of microalgae and cyanobacteria is observed in Lake Baikal in the past decade. In this paper, the concept of replaceable adsorption filter material based on chitosan flocculant filler and chlorinated polyvinyl chloride polymer nonwoven material are proposed. Functional and mechanical properties and morphology of the material are investigated depending on a packing density and a degree of chitosan filling. The introduction of 45% chitosan increases the Young's modulus up to 10 times, and it makes the material more rigid in 2.8 times. The high efficiency of sorption and growth inhibition of cumulative biomass culture was shown. The biomass source is taken from the coast of Barguzinsky Bay of Lake Baikal. Dominant species is microalgae of Scenedesmus genus.     

Quantitative detection of species-specific DNA in feedstuffs and fish meals

A sensitive and rapid method for the quantitative detection of bovine-, ovine-, swine-, and chicken-specific mitochondrial DNA sequences based on real-time PCR has been developed. The specificity of the primers and probes for real-time PCR has been tested using DNA samples of other vertebrate species that may also be present in rendered products. The quantitative detection was performed with dual-labeled probes (TaqMan) using absolute quantification with external standards of single species meat-and-bone meals. This method facilitates the detection of 0.01% of the target species-derived material in concentrate feed mixtures and fish meals.     

Rapid fabrication of poly(ε‐caprolactone) nanofibers using needleless alternating current electrospinning

Poly(ε‐caprolactone) ( PCL) biopolymer nanofibers and micro‐fibers have been fabricated for the first time at the rates up to 14.0 g per hour using a needleless and collectorless alternating current electrospinning technique. By combining the ac‐voltage, “green” low toxicity glacial acetic acid (AA) as the solvent and sodium acetate (NaAc) as an additive, beadless PCL fibers with diameters tunable from 150 nm to 2000 nm, varying surface morphology and degree of self‐bundling are obtained. In this new approach, the addition of NaAc plays a crucial role in improving the spinnability of PCL solution and fiber morphology. NaAc reveals the concentration‐dependent effect on charge transfer and rheological properties of the PCL/AA precursor, which results in broader ranges of spinnable PCL concentrations and ac‐voltages suitable for rapid manufacturing of PCL‐based fibers. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43232.     

MoO2 Diffusion in Aluminosilicate Glass

A diffusion couple of an oxidized molybdenum disk and a glass cylinder was used to measure the solubiiity and effective binary diffusion coefficient of MoO₂ in a non-alkali aluminosilicate glass. At 1400°C, the solubility limit was 8.4 mol%; the value of the diffusion coefficient (4.1 × 10⁻¹⁶ m²/s) was significantly lower than that estimated from the Stokes-Einstein relation.