Design and performance analysis of a nanoscaled inverter based on wrap-aroundgate nanowire MOSFETs

The design and analysis of a silicon nanowire inverter with a wrap-around-gate nMOS is presented and its performance is compared with that of a conventional inverter. The analysis shows that the nano-channel structure design can improve carrier mobility by suppressing the transverse component of the electric field. This results in an enhancement in the current drive of the nMOS, and contributes to lowering power consumption and the switching delay. Simulated power consumption and rise time of the proposed design was found to be about 20 μW and 0.5 ns, respectively, compared with 2.5 mW and 1.5 ns achievable with conventional planar MOSFETs. Investigation of the gate length shows that a nMOS with shorter gates have an improved switching response compared with long channel devices.     

Poly(methyl methacrylate) and polyacrylonitrile dispersions stabilized by gelatin

Methyl methacrylate was polymerized in an aqueous medium in the presence of gelatin using potassium persulfate as initiator. The dispersion mode of polymerization, when the monomer is completely miscible with water, was investigated and compared with an emulsion process, which proceeds at higher monomer concentration. Spherical and relatively uniform polymer particles were formed. Macroscopic precipitation of polymer is prevented by combination of the steric stabilization by grafted gelatin and of repulsive electrostatic interactions from the initiator residues attached to the particle surface. Static and dynamic light scattering have been used to determine the molar mass (molar mass of the whole dispersion particle, M_wD ～ 10⁸-10⁹ g mol^?1) and hydrodynamic radius (R_hD ～ 50-120 nm) of the particles. The number of particles per unit volume does not depend on overall monomer concentration, and it is higher, and therefore the particle size is smaller, than that observed for the soapless emulsion polymerization. The addition of gelatin may be thus used to modify the particle size. Acrylonitrile dispersions were prepared under similar conditions. Unlike methyl methacrylate, this monomer does not swell the polymer particles. While poly(methyl methacrylate) particles are spherical and relatively uniform, the polyacrylonitrile dispersions consist of polydisperse aggregates of tiny polymer particles.     

Characterization of six-coordinated iron (V) in an oxide lattice

On the basis of a discussion of the correlations between the stability of the d³ configuration and the symmetry and size of the cation site, six-coordinated iron (V) has been stabilized in the La₂LiFeO₆ perovskite-type oxide and characterized by magnetic susceptibility, Mössbauer resonance and EPR measurements.     

Evaluation of the effectiveness of features selected by discriminant analysis methods

New theoretical and practical results concerning the use of discriminant analysis for feature selection are presented in the paper. Numerical values for the eigenvalues of the matrix SW_W⁻¹ S_B (within-class and between-class scatter matrices) are investigated. An analytic expression for their minimum value representing the minimum effectiveness is derived. Differences between real values and these minimum values are important for the evaluation of the effectiveness of features and thus for feature selection.     

Fast branch & bound algorithms for optimal feature selection

A novel search principle for optimal feature subset selection using the Branch & Bound method is introduced. Thanks to a simple mechanism for predicting criterion values, a considerable amount of time can be saved by avoiding many slow criterion evaluations. We propose two implementations of the proposed prediction mechanism that are suitable for use with nonrecursive and recursive criterion forms, respectively. Both algorithms find the optimum usually several times faster than any other known Branch & Bound algorithm. As the algorithm computational efficiency is crucial, due to the exponential nature of the search problem, we also investigate other factors that affect the search performance of all Branch & Bound algorithms. Using a set of synthetic criteria, we show that the speed of the Branch & Bound algorithms strongly depends on the diversity among features, feature stability with respect to different subsets, and criterion function dependence on feature set size. We identify the scenarios where the search is accelerated the most dramatically (finish in linear time), as well as the worst conditions. We verify our conclusions experimentally on three real data sets using traditional probabilistic distance criteria.     

Computing resultants on Graphics Processing Units: Towards GPU-accelerated computer algebra

In this article we report on our experience in computing resultants of bivariate polynomials on Graphics Processing Units (GPU). Following the outline of Collins’ modular approach [6], our algorithm starts by mapping the input polynomials to a finite field for sufficiently many primes m$m$. Next, the GPU algorithm evaluates the polynomials at a number of fixed points x∈_Zm$x\in {\mathbb{Z}}_m$, and computes a set of univariate resultants for each modular image. Afterwards, the resultant is reconstructed using polynomial interpolation and Chinese remaindering. The GPU returns resultant coefficients in the form of Mixed Radix (MR) digits. Finally, large integer coefficients are recovered from the MR representation on the CPU. All computations performed by the algorithm (except for, partly, Chinese remaindering) are outsourced to the graphics processor thereby minimizing the amount of work to be done on the host machine. The main theoretical contribution of this work is the modification of Collins’ modular algorithm using the methods of matrix algebra to make an efficient realization on the GPU feasible. According to the benchmarks, our algorithm outperforms a CPU-based resultant algorithm from 64-bit Maple 14 by a factor of 100.     

Decay of end effects in graphite/epoxy bolted joints

Almost all analyses of large structures neglect local effects due to the application of loads and due to the transfer of loads between structural elements. In recent years, however, the use in aircraft structures of highly anisotropic materials, such as graphite/epoxy, has motivated more detailed studies of the applicability of Saint-Venant's principle.

In this paper in graphite/epoxy is analysed using the finite element method (FEM). The influence of anisotropy and transition from a thicker to a thinner laminate cross-section (ply-drop) is investigated. The characteristic decay length which is large for highly anisotropic materials is lessened by a change in thickness.