Electrosynthesis and characterization of iron selenide thin films

Iron selenide thin films have been deposited onto stainless steel and fluorine-doped tin oxide (FTO) glass substrates by the electrodeposition process, in potentiostatic mode using ferric chloride (FeCl₃) and selenium dioxide (SeO₂) salts. The deposition mechanism and growth of the films were investigated by cyclic voltammetry and chronoamperometry. The structural, morphological, compositional and optical properties of the deposited films have been studied using X-ray diffraction (XRD), scanning electron microscopy (SEM), EDAX and optical absorption techniques, respectively. XRD studies reveal that the films are polycrystalline with monoclinic crystal structure. The surface morphology study shows that grains are uniformly distributed over the entire surface of the substrate. EDAX study reveals that the iron selenide films are rich in iron. Optical absorption study shows the presence of direct transition with bandgap energy of 1.23 eV.     

Photomagnetic susceptibility effect in CaSo4: Dy phosphors

Dysprosium activated phosphors of diverse activator concentration have been prepared, with and without addition of flux and their magnetic susceptibilities have been measured by Gouy method. The changes in magnetic susceptibilities have been observed for both with and without flux added phosphors and both in presence and absence of light as well. The observed decrease of magnetic susceptibility has been attributed to the difference in multiplicities of emitting and ground state of Dy³⁺. The increase in magnetic susceptibility in flux added samples has been attributed to the increased population of impurity ions (Dy³⁺), in the host lattice, due to the presence of flux.     

Electroluminescence of CaS:Bi:Pd phosphors

CaS phosphors co-activated with Bi⁺³ and Pd⁺² impurities in varying concentrations have been prepared and their electroluminescence has been systematically studied. The dependence of brightness on voltage and frequency is discussed and observations of brightness waves have been interpreted in terms of the locations of traps relative to the luminescence centres. Conclusions are drawn regarding the mechanism involved in the electroluminescence process.     

Growth of thin films by solution-gas interface: A new technique

The solution-gas interface technique used for the formation of uniform and large area thin films of chalcogenides is described in this paper. The growth mechanism and kinetics of the film formation are discussed on the basis of the Surface tension of the solution. The optical and electrical properties are studied and the influence of the preparative parameters on the growth of thin films is discussed.     

Structural,optical, cytotoxicity,and antimicrobial properties of MgO,ZnO and MgO/ZnO nanocomposite for biomedical applications

In this study, MgO nanoparticles were successfully fabricated and incubated inside ZnO NPs to form MgO/ZnO nanocomposite for biomedical applications. The x-ray diffraction analysis of MgO, ZnO, and MgO/ZnO has shown the single-phase x-ray diffraction patterns through X'pert High score. The crystallite sizes were calculated as 18 nm, 42 nm, and 53 nm, respectively. The average particle size of MgO, ZnO, and MgO/ZnO nanopowders depicted from secondary electron images of field emission electron microscopy were 56 nm, 400 nm, and 450 nm, respectively. The presence of MgO NPs inside ZnO NPs was confirmed by transmission electron microscopy. The elemental dispersive spectroscopy of MgO, given the peaks of oxygen and magnesium, also showed only zinc and oxygen peaks in ZnO, which confirms no other impurities in MgO and ZnO powders. The elemental analysis of MgO/ZnO nanocomposite showed the peaks of Zinc and Oxygen, along with a tiny peak of Mg. The photoluminescence and UV–vis spectroscopy revealed the absorbance fluorescence limit of the nanomaterials. Fourier transform infrared spectroscopy confirmed the several groups present in the nanocomposite. The biocompatibility of MgO, ZnO, and MgO/ZnO was observed with human peripheral blood mononuclear cells. The cytotoxicity studies were also performed against human cancer (liver and breast) cell lines. The MgO, ZnO, and MgO/ZnO exhibited the antimicrobial properties against Escherichia coli and Staphylococcus aureus.     

Development of docetaxel nanocapsules for improving in vitro cytotoxicity and cellular uptake in MCF-7 cells

The aim of this study was to fabricate docetaxel loaded nanocapsules (DTX-NCs) with a high payload using Layer-by-Layer (LbL) technique by successive coating with alternate layers of oppositely charged polyelectrolytes. Developed nanocapsules (NCs) were characterized in terms of morphology, particle size distribution, zeta potential (ζ-potential), entrapment efficiency and in vitro release. The morphological characteristics of the NCs were assessed using transmission electron microscopy (TEM) that revealed coating of polyelectrolytes around the surface of particles. The developed NCs successfully attained a submicron particle size while the ζ-potential of optimized NCs alternated between (+) 34.64?±?1.5 mV to (?) 33.25?±?2.1 mV with each coating step. The non-hemolytic potential of the NCs indicated the suitability of the developed formulation for intravenous administration. A comparative study indicated that the cytotoxicity of positively charged NCs (F4) was significant higher (p?in vitro on MCF-7 cells. Furthermore, cell uptake studies evidenced a higher uptake of positive NCs (≥1.2 fold) in comparison to negative NCs. In conclusion, formulated NCs are an ideal vehicle for passive targeting of drugs to tumor cells that may result in improved efficacy and reduced toxicity of encapsulated drug moiety.     

Application of moisture activated dry granulation (MADG) process to develop high dose immediate release (IR) formulations

Moisture activated dry granulation (MADG) method was used to develop IR tablets with cohesive, fluffy and high dose drugs. To evaluate this approach, three drugs: metformin hydrochloride, acetaminophen and ferrous ascorbate were selected as model compound along with three binders: maltodextrin DE16, PVP K 12 and HPC. The granules were generated using MADG method and tablets were prepared using rotary tablet press. The granules and tablets were characterized for particle size analysis, flow properties, tablet hardness, friability, moisture content, dissolution study, disintegration time and stability study. All results were found to be within acceptable limits. Development of all formulation tablets were found as best fitted for an immediate release of Metformin hydrochloride, acetaminophen and ferrous ascorbate. MADG delivered a robust manufacturing process for generation of granules with excellent flowability. The tablets prepared using this method were found to show better content uniformity, good compactability and low friability. Use of this approach aids to lower the amount of excipients used to overcome physiochemical limitation of the drug substances and there side effects. Both drying and milling steps in wet granulation were not required for MADG process. MADG became a cost effective process which could lead to reduced total tablet size and also save time.     

Application of compressed sensing using chirp encoded 3D GRE and MPRAGE sequences

An implementation of Non-Fourier chirp-encoding in 3D Gradient Recalled Echo (GRE), susceptibility-weighted imaging (SWI) and Magnetization Prepared Rapid Gradient Echo (MPRAGE) sequences is presented with compressive sensing reconstruction. 3D GRE and MPRAGE sequences were designed, in which the phase encoding (PE) direction was encoded with spatially selective chirp encoding Radio Frequency (RF) pulses, while the slice and the readout directions were Fourier encoded using gradients. During each excitation along the PE direction, a different spatially-selective RF excitation pulse was used to encode the PE direction with a complete set of unitary chirp encoding basis. Multichannel compressive sensing reconstruction on the undersampled in vivo data demonstrated that images reconstructed from chirp encoded data were able to preserve the spatial resolution better than the Fourier encoding. The mean Structural Similarity (SSIM) across five subjects at the acceleration factor of 6, for chirp encoded MPRAGE was 0.934 compared to 0.912 for Fourier encoded MPRAGE. The implementation of prospective undersampling demonstrated the feasibility of using chirp encoding in clinical practice for accelerated imaging. The minimum intensity projection of the compressive sensing (CS) reconstructed susceptibility weighted images revealed that chirp encoding is able to delineate small vessels better than the Fourier encoding with the SSIM of 0.960 for chirp encoding compared to the SSIM of 0.949 for the Fourier encoding. Improved performance of chirp encoding for CS reconstruction and SWI, along with the feasibility of implementation makes them a practical candidate for clinical MRI scans.     

Improve Performance of Wireless Sensor Network Clustering Using Mobile Relay

Wireless Personal Communications - Wireless sensor networks sense events, collect data and forward it to the infrastructural node, called sink, for further processing and assessment. The...     

Synthesis and Characterization of Porogen Based Porous Low-k Thin Films

The present work is focused towards the lowering of the k value of deposited SiO₂ thin films by varying solvent concentration i.e. ethanol in the range 4-10 ml. Porous low-k thin films were synthesized by using the sol-gel spinon technique. A non-ionic surfactant polysorbate 80 (Tween 80) was used as a porogen to generate the porosity in the film matrix. The lower values of refractive index and film density were measured to be 1.19 and 0.94 gm/cm³ respectively for 10 ml solvent concentration. Further, the lowest k value of 2.2 and highest porosity percentage of 58.5 % were obtained for the same film due to the dilution of coating solution at higher solvent concentration. The water contact angle of the film was observed to be increased to 106.3° which indicates the transformation of the deposited film surface from hydrophilic to hydrophobic. The change in chemical structure as an effect of solvent concentration is studied by using FTIR. From FTIR spectra the disappearance of Si-OH groups at higher solvent concentration reveals the increase in condensation rate. Overall in this study, the result shows the significant change in structural, chemical and optical properties of the deposited films at 10 ml solvent concentration. Such deposited porous thin films with lower k value and enhanced hydrophobicity can be used as an interlayer dielectric (ILD) for back end of line (BEOL) in CMOS technology.