Cortex—MO＋的RFID读卡器模块设计

本文设计一种基于NXP公司的LPC812微控制器和SLRC610射频芯片的RFID模块方法。该模块采用内置天线,预留串口与外部通信。该模块性能优良、易于集成到RFID系统中,使用户更专注于系统功能方面的设计。     

MCU平台的嵌入式系统软件设计研究

嵌入式系统的运行需要可靠性和实时性的保证,因此良好的可靠性和实时性是嵌入式系统软件设计的重要标准。同时为了使软件系统的鲁棒性更强,嵌入式系统的设计需要一个非常好的软件架构。这里介绍了一种基于MCU平台的嵌入式系统软件架构方法。在这个方法中,事件驱动机制的引入满足了对软件架构的要求,主程序中不仅采用了优先调度机制,同时也加入了软件抗干扰措施,这些都使系统的实时性和可靠性得到了明显的提高。设计实验比较由该方法得到的软件架构与原始软件架构的实时性,得出由该方法优化后的软件架构确实具有更好的性能。     

如何构建网络环境下的计算机信息安全体系

计算机技术的不断发展,网络的不断普及,在给我们的工作,学习,生活,娱乐带来了极大的方便和好处同时,也给我们带来了新的威胁,那就是计算机系统安全问题。而我们的常常讨论的计算机系统安全包括计算机安全、网络安全和信息安全。其中信息安全是主线,它贯穿于计算机安全和网络安全之中。正是网络的广泛应用,在工作和生活中扮演如此重要的角色,如何来保障信息安全已经成为一个重要的问题。值得注意的是在实际应用中,由于操作系统的不同,网络拓扑技术的区别,连接介质的选择,网络接入技术的变化给实现计算机系统安全带来了复杂的操作性。根据参考资料,总结出3个层次的安全策略：技术安全,行为安全,意识安全。     

软件工程标准化现状与分析

当前社会已进入信息化时代,计算机技术在人们生活中的应用十分的广泛,计算机信息技术在很大的程度上推动了我国的经济社会的发展,促进了我国的国家建设,并且加快了我国实现工业化以及现代化的进度。而软件工程则是计算机信息技术中的重要组成,软件工程是整个信息系统中的最为重要的部分。本文对软件工程的标准化现状进行了相关分析,并提出了加强我国软件工程标准化体系的制定的步骤。     

基于Linux平台应用于路由器的B/S视频监控系统

在智能家居和物联网逐渐形成成熟产业链的今天,视频监控系统是其中最为重要的应用之一。在关公安全、交通调度、医疗卫生、系统控制等诸多领域,部署一款合适的视频监控系统,是使得这个系统保持高效运转的前提和保障。本文基于Linux系统和路由器的结合,设计了一种实时、有效的视频监控系统。系统很好的控制了硬件成本,在软件架构上使用了成熟且资源开销低的B／S方式。     

Response surface methodology study on electrochemical adsorption regeneration of water-based drilling fluid waste

ABSTRACT

This study explores an electrochemical adsorption method on the regeneration of aqueous drilling fluid waste. Response surface analysis was applied to investigating the electrochemical factors on the adsorption performance. The response surface polynomial model optimized the preferred electrochemical adsorption conditions with adsorption time of 20 min, spacing electrodes of 5 cm, adsorption concentration of 5% and NaCl concentration of 2 g/L. The model calculated electrochemical adsorption amount of drilling fluid showed only 1.3% deviation from the experimental results. Thus, the model could provide effective support for the device design and application of drilling fluid electrochemical adsorption process.     

关系数据库技术在计算机网络设计中的运用

随着我国社会经济建设水平的不断提高和计算机网络技术的推广普及,关系数据库技术在计算机网络设计中的运用成为社会各领域关注的焦点,本文将从关系数据库技术的角度出发,结合计算机网络设计的实际,对关系数据库技术在计算机网络设计中的运用进行深入的研究和探讨。     

环氧-丙烯酸树脂乳液性能与涂膜固化规律的研究

采用丙烯酸接枝改性环氧树脂的方法制得了自乳化自交联型的乳液,针对乳液在涂料应用中的重要性能,考察了乳液黏度随固含量、温度和pH值的变化规律。通过测定涂膜吸水率、交联率,得到了涂膜的固化规律,并用红外光谱分析了涂膜的固化反应。结果表明:制得的涂膜耐水性、附着力、柔韧性和防腐蚀等性能优异。     

The Influence of Network Structural Properties on Information Dissemination Power in Microblogging Systems

The potential of microblogging networks to spread information, ideas, and influence via social links has been recognized. Individuals at central or critical positions in the microblogging networks are expected to play an important role in spreading information, but this belief must be tested with empirical investigations in actual information dissemination. Furthermore, it is possible that individuals with different types of structural importance influence the information dissemination in different ways. This article examines the impact of five structural properties (degree, betweenness, closeness, tie strength, and k-value) on information dissemination capabilities by tracking the dissemination of 150 messages in Sina Weibo. The results highlight the importance of betweenness centrality, which best explains the influence on information dissemination distance and coverage size. It also best predicts the information dissemination efficiency. Degree centrality is found to be a strong predictor of one’s influence among immediate followers. Tie strength negatively correlates with influence on the information dissemination distance and coverage size. These structural properties address different aspects of the information dissemination power and should be used in a complementary way when planning information dissemination strategies in microblogging systems.     

Fabrication and Microstructure Characterization of Ti3SiC2 Synthesized from Ti/Si/2TiC Powders Using the Pulse Discharge Sintering (PDS) Technique

Ti/Si/2TiC powders were prepared using a mixture method (M) and a mechanical alloying (MA) method to fabricate Ti₃SiC₂ at 1200°–1400°C using a pulse discharge sintering (PDS) technique. The results showed that the Ti₃SiC₂ samples with <5 wt% TiC could be rapidly synthesized from the M powders; however, the TiC content was always >18 wt% in the MA samples. Further sintering of the M powder showed that the purity of Ti₃SiC₂ could be improved to >97 wt% at 1250°–1300°C, which is ∼200°–300°C lower than that of sintered Ti/Si/C and Ti/SiC/C powders using the hot isostatic pressing (HIPing) technique. The microstructure of Ti₃SiC₂ also could be controlled using three types of powders, i.e., fine, coarse, or duplex-grained, within the sintering temperature range. In comparison with Ti/Si/C and Ti/SiC/C mixture powders, it has been suggested that high-purity Ti₃SiC₂ could be rapidly synthesized by sintering the Ti/Si/TiC powder mixture at relatively lower temperature using the PDS technique.