Effect of ionizing radiation on antinutritional features of velvet bean seeds (Mucuna pruriens)

Impact of gamma irradiation on the antinutritional constituents of seeds of Mucuna pruriens was assessed on exposing to doses of 2.5, 5.0, 7.5, 10, 15 and 30 kGy. Except for 2.5 kGy, the rest showed significant dose-dependent increase in phenolics. Tannin concentration did not differ significantly up to 7.5 kGy, while it significantly increased at higher doses. Excluding 2.5 kGy, the rest of the treatments showed significant decreases in the phytic acid and complete degradation was attained at 15 and 30 kGy. The l-DOPA concentration showed a dose-dependent decline. A trace amount of hemagglutination activity was seen on human erythrocytes in raw seeds, which was completely absent on irradiation (>5 kGy). Concentration of Polonium-210, a natural radionuclide falls within the admissible limits for consumption. As Mucuna seeds serve as food, feed or as pharmaceuticals, it may be necessary to set the ionizing radiation to a specific dose to retain optimum levels or to eliminate phenolics, tannins, phytic acid and L-DOPA. As irradiation is a physical and cold process, it may be ideal and emerge as an important technique to improve the nutritional or pharmaceutical quality of Mucuna seeds and its products.     

Development of male contraceptive vaccine--a perspective

Anti-disialoganglioside (GD2) monoclonal antibodies (MAbs) have been used in vivo for immunolocalization and in phase I and II trials to target disseminated neuroblastoma, the most common extracranial solid tumor in children. However, the efficacy of these first-generation MAbs is likely to be improved by using engineered anti-GD2 antibodies. The generation of single-chain antibody fragments (scFv) could be very helpful as these molecules can be further modified to produce recombinant molecules with pre-defined properties such as immunotoxins, chimeric, or bispecific antibodies. Thus, a scFv directed against GD2 (scFv 7A4) was cloned, sequenced, and expressed. Its binding properties were characterized and compared to that of the parental MAb 7A4. Nucleotide sequence analysis of the scFv 7A4 indicated that its VH region belongs to the V region IIID subgroup and the V kappa to the V region II subgroup. The scFv 7A4 bound to GD2+ neuroblastoma cell lines but not to GD2- cell lines or to GD2- cells isolated from peripheral blood. ELISA and thin-layer chromatography (TLC) indicated that it retained the anti-GD2 specificity, and exhibited a slight cross-reaction with GD3 as the parental MAb. This scFv makes it possible to develop new useful reagents through genetic engineering for adjuvant tumor therapy.     

Delamination dynamics in through-thickness reinforced laminates with application to DCB specimen

Bridged crack models using beam theory formulations have proved to be effective in modeling quasi-static delamination crack growth under large scale bridging conditions in through-thickness reinforced structures. In this paper, beam theory is used to study dynamic mode I crack propagation in through-thickness reinforced laminar structures. In particular, steady state dynamic crack growth for a Double Cantilever Beam (DCB) loaded with a flying wedge is examined. The steady state crack propagation characteristics are mapped out in terms of controllable loading and material parameters including the crack velocity and the properties of the through-thickness reinforcement. For small crack velocities, the through-thickness reinforcement considerably enhances the delamination resistance of the structure. At higher velocities, the kinetic energy term dominates the overall energetics and the relative effect of the reinforcement on the delamination resistance is insignificant. The model suggests a simple fracture test for estimating the properties of the through-thickness reinforcement under dynamic loading conditions.     

Microwave-hydrothermal synthesis of barium titanate under stirring condition

The role of in situ stirring under microwave-hydrothermal (M-H) conditions on the synthesis of barium titanate was investigated for the first time by powder X-ray diffraction and scanning and transmission electron microscopy. Stirring under M-H conditions in the temperature range of 150–200 °C led to enhanced crystallization of Ba titanate as revealed by yields compared to the static condition. In addition, stirring led to smaller and more uniform crystals under M-H conditions compared to those crystallized without stirring. Powder X-ray diffraction revealed the formation of only cubic polymorph of Ba titanate at or below 200 °C in 4 h with or without in situ stirring under M-H conditions. These results show that stirring is an important parameter during M-H synthesis of nanophase Ba titanate.     

Peristaltic activity of thermally radiative magneto-nanofluid with electroosmosis and entropy analysis

The importance of gold and silver nanoparticles in the blood flow has immense applications in biomedicine for the treatment of cancer disease and wound treatment due to their large atomic number and antimicrobial property. The current study deals with the magnetohydrodynamic and electroosmotic radiative peristaltic Jeffrey nanofluid (blood–silver/gold) flow with the effect of slip and convective boundary conditions in the nonsymmetric vertical channel. The nondimensional governing equations have been solved analytically and the exact solutions have been presented for velocity, temperature, shear stress, trapping, entropy generation, pressure gradient and heat transfer coefficient. The pictorial representations have been prepared for the flow quantities with respect to fluid flow parameters of interest. It is noticed from the current study that the gold-based nanofluids exhibit higher velocity than silver-based nanofluids. Enhancement of thermal radiation decreases the total entropy generation. The size of the tapered bolus decreases with the enhancement of magnetic field strength. The present model is applicable in designing pharmacodynamic pumps and drug delivery systems.     

Optimizing HVOF Spray Parameters to Maximize Bonding Strength of WC-CrC-Ni Coatings on AISI 304L Stainless Steel

High velocity oxygen fuel (HVOF)-sprayed cermet coatings are extensively used to combat erosion-corrosion in naval applications and in slurry environments. HVOF spray parameters such as oxygen flow rate, fuel flow rate, powder feed rate, carrier gas flow rate, and spray distance have significant influence on coating characteristics like adhesion bond strength and shear strength. This paper presents the use of statistical techniques in particular response surface methodology (RSM), analysis of variance, and regression analysis to develop empirical relationships to predict adhesion bond strength and lap shear bond strength of HVOF-sprayed WC-CrC-Ni coatings. The developed empirical relationships can be effectively used to predict adhesion bond strength and lap shear bond strength of HVOF-sprayed WC-CrC-Ni coatings at 95% confidence level. Response graphs and contour plots were constructed to identify the optimum HVOF spray parameters to attain maximum bond strength in WC-CrC-Ni coatings.