A variable rate multipulse speech coder for CDMA cellular systems

Variable Rate (VR) speech coders are classified into: source-controlled VR coders where the rate is selected depending on the local character of the speech, and network-controlled VR coders where an external control signal selects the coding rate. The first category benefits from the variable rate channels used by Code Division Multiple Access (CDMA) mobile communications. The second category is indispensable for the right behaviour of the CDMA systems under conditions as high traffic levels. The VR speech coder presented in this communication exhibits both types of control. The source control is achieved by means of a Voice Activity Detector (VAD) and a phonetic classifier. The network control acts on the selection procedure of the multipulse excitation sequence to the synthesis filter. This is the main advantage of our VR MultiPulse speech coder because by means of an external signal the bit rate can be changed only every 4 msec, without transitions or distortions. Considering one-way communication, six different operating rates can be externally selected ranging from 4.8 to 9.1 kbps for the active frames; an average bit rate of 380 bps is required for the noise frames.This work has been partly funded by the Spanish Research National Plan under grant no. TIC92-0800-C05-02 and by Northern Telecom.     

Ultrathin PECVD epitaxial Si solar cells on glass via low‐temperature transfer process

Fabrication of high‐quality ultrathin monocrystalline silicon layers and their transfer to low‐cost substrates are key steps for flexible electronics and photovoltaics. In this work, we demonstrate a low‐temperature and low‐cost process for ultrathin silicon solar cells. By using standard plasma‐enhanced chemical vapor deposition (PECVD), we grow high‐quality epitaxial silicon layers (epi‐PECVD) from SiH₄/H₂ gas mixtures at 175 °C. Using secondary ion mass spectrometry and transmission electron microscopy, we show that the porosity of the epi‐PECVD/crystalline silicon interface can be tuned by controlling the hydrogen accumulation there. Moreover, we demonstrate that 13–14% porosity is a threshold above which the interface becomes fragile and can easily be cleaved. Taking advantage of the H‐rich interface fragility, we demonstrate the transfer of large areas (∽10 cm²) ultrathin epi‐PECVD layers (0.5–5.5 µm) onto glass substrates by anodic bonding and moderate annealing (275–350 °C). The structural properties of transferred layers are assessed, and the first PECVD epitaxial silicon solar cells transferred on glass are characterized. Copyright © 2016 John Wiley & Sons, Ltd.     

Tools to maintain postharvest fruit and vegetable quality through the inhibition of ethylene action: a review

Ethylene is a plant hormone controlling a wide range of physiological processes in plants. During postharvest storage of fruit and vegetables ethylene can induce negative effects including senescence, over-ripening, accelerated quality loss, increased fruit pathogen susceptibility, and physiological disorders, among others. Apart from the endogenous ethylene production by plant tissues, external sources of ethylene (e.g. engine exhausts, pollutants, plant, and fungi metabolism) occur along the food chain, in packages, storage chambers, during transportation, and in domestic refrigerators. Thus, it is a great goal in postharvest to avoid ethylene action. This review focuses on tools which may be used to inhibit ethylene biosynthesis/action or to remove ethylene surrounding commodities in order to avoid its detrimental effects on fruit and vegetable quality. As inhibitors of ethylene biosynthesis and action, good results have been found with polyamines and 1-methylcyclopropene (1-MCP) in terms of maintenance of fruit and vegetable quality and extension of postharvest shelf-life. As ethylene scavengers, the best results can be achieved by adsorbers combined with catalysts, either chemical or biological (biofilters).     

Changes on indigenous microbiota,colour, bioactive compounds and antioxidant activity of pasteurised pomegranate juice

Juices prepared from arils of ‘Mollar’ pomegranates were analysed for naturally occurring microorganisms, CIE Lab colour parameters, total phenols, anthocyanins and punicalagins, ellagic acid content and antioxidant capacity before and after low-, mild- and high-temperature pasteurisations (LTPs, MTPs and HTPs): 65, 80 and 90 °C for 30 or 60 s. Mean aerobic plate count (APC), yeast and mold count (YMC), and lactic acid bacteria (LAB) for fresh juices were 5.7, 5.36 and 4.0 log CFU/mL, respectively. MTPs and HTPs were sufficiently effective to decrease APCs to nil or negligible levels. An increase in CIE a values and decrease in CIE b values were the characteristic colour changes in heat-treated juices. The effect of pasteurisations showed that total phenols, punicalagins and ellagic acid were not much affected by thermal processing. Total anthocyanin content and antioxidant capacity were substantially and significantly influenced by the heat treatment applied. A linear relationship was observed between Trolox equivalent antioxidant capacity (TEAC) values and total anthocyanins, suggesting that they contributed strongly to the antioxidant capacity of pomegranate juice.     

Antimicrobial activity of food-compatible plant extracts and chitosan against naturally occurring micro-organisms in tomato juice

BACKGROUND: Chitosan (AC) and five hydroalcoholic extracts from Lithospermum erythrorhizon (SE), Rheum palmatum (RE), Thymus vulgaris (AT), Lippia citriodora (PLX) and a mixture of Rosmarinus officinalis, Salvia lavandulifolia and Thymus mastichina (LA) were tested for antimicrobial activity against bacteria, yeasts and filamentous fungi using two broth dilution methods. The effects of adding single extracts on naturally occurring micro‐organisms and sensory qualities of raw tomato juice were also evaluated. RESULTS: SE extract exhibited the strongest activity, with minimum inhibitory concentrations (MICs) of 100–400 µg mL^?1 for Gram‐positive and 1600–3200 µg mL^?1 for Gram‐negative bacteria. Enterobacter aerogenes showed the greatest susceptibility to AC (MIC 1600 µg mL^?1). Lethal effects of extracts and AC were achieved at a minimum bactericidal concentration (MBC)/MIC ratio of 2 in 88% of assays. SE and RE extracts and AC also exhibited antifungal effect against yeasts, but they had no activity on filamentous fungi. Control and 100 mg L^?1 SE‐added tomato juices did not differ in acceptance, but this SE concentration was not effective in the control of microbial load throughout cold storage. CONCLUSION: Results confirm the antimicrobial potential of the plant extracts, but additional research is needed until the agents responsible for the activities have been determined in order to use them as natural constituents of multiple‐barrier food preservation systems. Copyright © 2012 Society of Chemical Industry     

On the response under different thermal treatments of the thermostable endopolygalacturonase produced byRhizopus nigricans

The influence of temperature and thermal treatments on the endopolygalacturonase activity produced byRhizopus nigricans was studied. The optimum temperature was at 50 °C. The enzymatic preparation also showed the highest endo pattern at this temperature. This endopolygalacturonase showed high thermostability between 90–100 °C and a bimodal behaviour in relation to the thermal treatments, because the enzyme was strongly inactivated at 70 °C. When the enzyme was treated at 90 and 70 °C consecutively, the inactivation at 70 °C was smaller.

---

Einfluß der verschiedenen thermischen Behandlungen der thermostabilen Endopolygalacturonase vonRhizopus nigricans

Zusammenfassung Es wurde der Einfluß der Temperatur und der thermischen Behandlungen auf die Aktivität der Endopolygalacturonase vonRhizopus nigricans studiert. Hierbei wurde eine optimale Endtemperatur von 50 °C erreicht, wobei das Enzym seinen maximalen Charakter als Endo-Enzym belegt. Diese Endopolygalacturonase zeigt die größte Thermostabilität zwischen 90 °–100 °C und ein bimodales Verhalten, wenn man bedenkt, daß das Enzym bei 70 °C stark inaktiv ist. Wenn das Enzym zweimal hintereinander bei 90 °C und 70 °C behandelt worden ist, hat dies die Konsequenz, daß die Inaktivität bei 70 °C weniger ist.

---

---

In memory of Dr. José María Núñez (1959–1990)     

Relationship between collagen characteristics,lipid content and raw and cooked texture of meat from young bulls of fifteen European breeds

Variations in texture were determined for 10 day aged raw and cooked Longissimus thoracis (LT) muscle from 436 bulls of 15 European cattle breeds slaughtered at an age of 13–16 months. Variations in texture were related to differences in pH 24 h post-mortem, sarcomere length, collagen characteristics and lipid content. The shear force of cooked meat samples varied from 43.8 to 67.4 N/cm². Simmental, Highland and Marchigiana cattle had the highest shear force values and Avileña-Negra Ibérica, Charolais, Casina and Pirenaica cattle had the lowest values. Cooked meat toughness showed a weak negative correlation to lipid content (P < 0.001) but no correlation to collagen characteristics. Raw meat texture measured by compression correlated positively (P < 0.001) with total and insoluble collagen. In conclusion, collagen characteristics showed correlation to raw meat texture but not to cooked meat toughness of LT muscle in European young bulls.     

Levels of PCDD/Fs, PCBs, and PCNs in soils and vegetation in an area with chemical and petrochemical industries

The concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDFs), polychlorinated biphenyls (PCBs), and polychlorinated naphthalenes (PCNs) have been determined in soil and wild chard samples collected in an area of Tarragona County (Catalonia, Spain) with an important number of chemical and petrochemical industries. Samples were also collected in urban/residential zones, as well as in presumably unpolluted sites. In soils, the levels of PCDD/Fs ranged from 0.16 ng I-TEQ/kg (unpolluted sampling points) to 2.65 ng I-TEQ/kg (industrial zone), and those of sigmaPCBs ranged from 657 to 12038 ng/ kg in these same zones. In turn, sigmaPCNs ranged from 32 (unpolluted sites) to 180 ng/kg (residential/urban sites). In contrast to soil concentrations, there were not significant differences among collection zones in the levels of PCDD/Fs, PCBs, and PCNs found in chard. However, PCB and PCN concentrations in chard samples collected at the unpolluted sampling points were higher than the respective concentrations in soils. In general terms, the current concentrations of the organic pollutants analyzed in this study are similar or lower than data from previous reports in other countries.