Analytical solutions for one-phase seepage flows impeded by wellbore seals

Steady, one-phase, plane and axisymmetric, Darcian seepage in a homogeneous rock adjacent to a partly isolated wellbore with annular seals is analytically studied. Water flows from an isobaric feeding contour and a fracture, which is kept at the same pressure as the feeding contour, to a wellbore. Partial isolation of the wellbore makes its wall a composition of intermittently arrayed no-flow boundaries, which model the wellbore seals, and isobaric surfaces, which model the annular compartments between the seals and a wellbore tubular on which the seals are mounted. Pressure drops from the aquifer (fracture) to the compartments and further to the borehole that generates a hierarchy of flows mathematically equivalent to the Toth [Freeze, R.A., Cherry, J.A., 1979. Groundwater. Prentice Hall, Englewood Cliffs] hydrogeological patterns of regional, intermediate and local groundwater flows on the scale of catchments. Conformal mappings of complex potential domains onto physical planes, where water seepage takes place, are used to tackle the fragments of the full feeding contour-fracture–sealed wellbore system. Explicit rigorous solutions for the flow characteristics (pressure and stream function) enable calculating optimal wellbore isolation with a criterion of minimal water flow rate from the fracture.     

Production of low cost self compacting concrete using bagasse ash

Self compacting concrete (SCC) is a development of conventional concrete, in which the use of vibrator for compaction is no more required. This property of self compacting concrete has made its use more attractive all over the world. But its initial higher supply cost over conventional concrete, has hindered its application to general construction. Therefore, for producing low cost SCC, it is prudent to look at the alternates to help reducing the SSC cost. This research is aimed at evaluating the usage of bagasse ash as viscosity modifying agent in SCC, and to study the relative costs of the materials used in SCC.In this research, the main variables are the proportion of bagasse ash, dosage of superplasticizer for flowability and water/binder ratio. The parameters kept constant are the amount of cement and water content.Test results substantiate the feasibility to develop low cost self compacting concrete using bagasse ash. In the fresh state of concrete, the different mixes of concrete have slump flow in the range of 333 mm to 815 mm, L-box ratio ranging from 0 to 1 and flow time ranging from 1.8 s to no flow (stucked). Out of twenty five different mixes, five mixes were found to satisfy the requirements suggested by European federation of national trade associations representing producers and applicators of specialist building products (EFNARC) guide for making self compacting concrete. The compressive strengths developed by the self compacting concrete mixes with bagasse ash at 28 days were comparable to the control concrete. Cost analysis showed that the cost of ingredients of specific self compacting concrete mix is 35.63% less than that of control concrete, both having compressive strength above 34 MPa.     

Ultrasound‐Induced Wireless Energy Harvesting for Potential Retinal Electrical Stimulation Application

Retinal electrical stimulation for people with neurodegenerative diseases has shown to be feasible for direct excitation of neurons as a means of restoring vision. In this work, a new electrical stimulation strategy is proposed using ultrasound‐driven wireless energy harvesting technology to convert acoustic energy to electricity through the piezoelectric effect. The design, fabrication, and performance of a millimeter‐scale flexible ultrasound patch that utilizes an environment‐friendly lead‐free piezocomposite are described. A modified dice‐and‐fill technique is used to manufacture the microstructure of the piezocomposite and to generate improved electrical and acoustic properties. The as‐developed device can be attached on a complex surface and be driven by ultrasound to produce adjustable electrical outputs, reaching a maximum output power of 45 mW cm^?2. Potential applications for charging energy storage devices and powering commercial electronics using the device are demonstrated. The considerable current signals (e.g., current >72 µA and current density >9.2 nA µm^?2) that are higher than the average thresholds of retinal stimulation are also obtained in the ex vivo experiment of an implanted environment, showing great potential to be integrated on implanted biomedical devices for electrical stimulation application.     

Flow of kinetic parameters in a typical swimming pool type research reactor

Calculations were performed to estimate the variation in kinetic parameters (delayed neutron fraction and prompt neutron generation time) in different core configurations of a typical swimming pool type research reactor. Pakistan research Reactor-1 (PARR-1) was employed for this study. The effect due to burnup of the core was also studied. Calculations were performed with the help of computer codes WIMSD/4 and CITATION. Precursors yield was modified according to the neutron flux averaging only. This is the simple way to calculate the precursor yield for a particular core. The kinetic parameters are different for different core configurations. The β_eff decreases with 1.33 × 10⁻⁶/% burnup whereas prompt neutron generation time increases with 6.42 × 10⁻⁸ s/% burnup. The results were compared with safety analysis report and with published values and were found in good agreement. This study provides the confidence to understand the change in the kinetic parameters of research reactors with core change and also with burnup of the core.     

M.A.L.D.I.-T.O.F. mass spectrometry characterization of 4-alkyl substituted phenol-formaldehyde novalac type resins

Two methods of synthesis for 4-alkyl substituted phenol-formaldehyde resins are described. A common method for synthesis of novolac type phenol-formaldehyde resin uses sulfuric acid catalyst in the presence of xylene for azeotropic removal of water of reaction. By the use of M.A.L.D.I.-T.O.F. mass spectrometry we have demonstrated that m-xylene is incorporated into these polymers. Polymers free of impurities are best prepared using a cation exchange resin as catalyst in the presence of a less reactive solvent, e.g. chlorobenzene, or in the absence of solvents. © 1997 Elsevier Science Ltd.     

Conducting nanocomposites of polyaniline/nylon 6,6/zinc oxide nanoparticles: preparation,characterization and electrical conductivity studies

Nanocomposites of polyaniline as a conducting polymer and main matrix, zinc oxide nanoparticles as inorganic filler and nylon 6,6 as supporting matrix were prepared by solution mixing process in a common solvent. DC electrical conductivity and its thermal stability at different temperatures under ambient atmospheric conditions were studied for the nanocomposites. The stability studies were carried out by two slightly different techniques, i.e., cyclic ageing and isothermal ageing. The results showed that the DC electrical conductivity of the nanocomposites decreased with increase in the content of zinc oxide nanoparticles whereas the thermal stability in terms of DC electrical conductivity retention was slightly improved in few cases but not for all samples. The advance analytical techniques such as Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy, transmission electron microscopy, thermogravimetric analysis and X-ray diffraction (XRD) were also used to characterize the selected samples. It was also observed that zinc oxide nanoparticles in the nanocomposites were homogeneously distributed; however, some clusters/aggregates were also present. The FTIR results showed the existence of some interaction between the individual components of the nanocomposites as evident from the little shift in the peaks of FTIR spectra. This result was also supported by XRD data.     

Role of mismatch repair in the Escherichia coli UVM response

Mutagenesis at 3,N4-ethenocytosine (epsilonC), a nonpairing mutagenic lesion, is significantly enhanced in Escherichia coli cells pretreated with UV, alkylating agents, or H2O2. This effect, termed UVM (for UV modulation of mutagenesis), is distinct from known DNA damage-inducible responses, such as the SOS response, the adaptive response to alkylating agents, or the oxyR-mediated response to oxidative agents. Here, we have addressed the hypothesis that UVM results from transient depletion of a mismatch repair activity that normally acts to reduce mutagenesis. To test whether the loss of mismatch repair activities results in the predicted constitutive UVM phenotype, E. coli cells defective for methyl-directed mismatch repair, for very-short-patch repair, or for the N-glycosylase activities MutY and MutM were treated with the UVM-inducing agent 1-methyl-3-nitro-1-nitrosoguanidine, with subsequent transfection of M13 viral single-stranded DNA bearing a site-specific epsilonC lesion. Survival of the M13 DNA was measured as transfection efficiency, and mutation fixation at the lesion was characterized by multiplex sequencing technology. The results showed normal UVM induction patterns in all the repair-defective strains tested. In addition, normal UVM induction was observed in cells overexpressing MutH, MutL, or MutS. All strains displayed UVM reactivation, the term used to describe the increased survival of epsilonC-containing DNA in UVM-induced cells. Taken together, these results indicate that the UVM response is independent of known mismatch repair systems in E. coli and may thus represent a previously unrecognized misrepair or misreplication pathway.     

Safe physical human robot interaction-past,present and future

When a robot physically interacts with a human user, the requirements should be drastically changed. The most important requirement is the safety of the human user in the sense that robot should not harm the human in any situation. During the last few years, research has been focused on various aspects of safe physical human robot interaction. This paper provides a review of the work on safe physical interaction of robotic systems sharing their workspace with human users (especially elderly people). Three distinct areas of research are identified: interaction safety assessment, interaction safety through design, and interaction safety through planning and control. The paper then highlights the current challenges and available technologies and points out future research directions for realization of a safe and dependable robotic system for human users.     

Determination of buffer capacity for payload multiplexing in SDH systems

This paper presents a method for multiplexing C-3 payload according to the ITU-T recommendations G.707, G.708 and G.709. Our technique eliminates signal rate variations, which occur in various multiplexing structures in the synchronous digital hierarchy (SDH) networks, by using a buffer. Calculations related to the buffer capacity for C-3 payload are also presented in this paper. The proposed methodology is expected to be an efficient solution for multiplexing C-3 and other containers in the SDH networks. © 1997 John Wiley & Sons, Ltd.