Progressive Compression of 3D Mesh Geometry Using Sparse Approximations from Redundant Frame Dictionaries

In this paper, we present a new approach for the progressive compression of three‐dimensional (3D) mesh geometry using redundant frame dictionaries and sparse approximation techniques. We construct the proposed frames from redundant linear combinations of the eigenvectors of a combinatorial mesh Laplacian matrix. We achieve a sparse synthesis of the mesh geometry by selecting atoms from a frame using matching pursuit. Experimental results show that the resulting rate‐distortion performance compares favorably with other progressive mesh compression algorithms in the same category, even when a very simple, sub‐optimal encoding strategy is used for the transmitted data. The proposed frames also have the desirable property of being able to be applied directly to a manifold mesh having arbitrary topology and connectivity types; thus, no initial remeshing is required and the original mesh connectivity is preserved.     

New Paradigms in Wireless Communication Systems

This paper discusses what a new paradigm can be in wireless communication systems of the twenty-first century. First, it suggests two directions for the new paradigm; one is “micro- and nano-device communication system” which is the projected scenario considering that the entities in source and destination have been shrinking throughout the history of wireless communication systems. The second direction is “networked robot system”, which emerges as a natural extension of mobile ad hoc networking where the networking is closely related to motion control of robots. Secondly, it shows two interesting research topics, “the new communication protocol design” and “signal processing”, respectively, that arise in the wake of the fusion between the two directions in the novel communication paradigm. Finally, it considers a new science of wireless communications in the twenty-first century. Shinsuke Hara received the B.Eng., M.Eng. and Ph.D. degrees in communications engineering from Osaka University, Osaka, Japan, in 1985, 1987 and 1990, respectively. From April 1990 to March 1997, he was an assistant professor in the Department of Communication Engineering, School of Engineering, Osaka University, and from October 1997 to September 2005, he was an associate professor in the Department of Electronic, Information and Energy Engineering, Graduate School of Engineering, Osaka University. Since October 2005, he has been a professor in the Department of Physical Electronics and Informatics, Graduate School of Engineering, Osaka City University. In addition, from April 1995 to March 1996, he was a visiting scientist at Telecommunications and Traffic Control Systems Group, Delft University of Technology, Delft, The Netherlands. His research interests include wireless communications systems and digital signal processing. Hiroyuki Yomo received B.S. degree in communication engineering from Department of Communication Engineering, Osaka University, Osaka, Japan, in 1997, and M.S. and Ph.D. degrees in communication engineering from Department of Electronic, Information, and Energy Engineering, Graduate School of Engineering, Osaka University, Osaka Japan, in 1999 and 2002, respectively. From April 2002 to March 2004, he was a Post-doctoral Fellow in Department of Communication Technology, Aalborg University, Denmark. From April 2004 to September 2004, he was at Internet System Laboratory, NEC Corporation, Japan. Since October 2004, he has been an Assistant Research Professor in Center for TeleInfrastructure (CTIF), Aalborg University, Denmark. His main research interests are access technologies, radio resource management, and link-layer techniques in the area of short-range communication, cellular network, cognitive radio, and sensor network. Petar Popovski received the Dipl.-Ing. in electrical engineering and M.Sc. in communication engineering from the Faculty of Electrical Engineering, Sts. Cyril and Methodius University, Skopje, Republic of Macedonia, in 1997 and 2000, respectively. He received a Ph.D. degree from Aalborg University, Denmark, in 2004. From 1998 to 2001 he was a teaching and research assistant at the Institute of Telecommunications, Faculty of Electrical Engineering in Skopje. He is currently Assistant Professor at the Department of Communication Technology at the Aalborg University. His research interests are related to the PHY-MAC aspects of wireless protocols, wireless sensor networks, random access protocols, and network coding. Kazunori Hayashi received the B.E., M.E. and Ph.D. degrees in communication engineering from Osaka University, Osaka, Japan, in 1997, 1999 and 2002, respectively. He spent 3 months in 2000 at Aalborg University, Denmark, as a Visiting Scholar. Since 2002, he has been with the Department of Systems Science, Graduate School of Informatics, Kyoto University. He is currently an Assistant Professor there. His research interests include digital signal processing for communications systems.     

Oxygen‐Free Highly Conductive Graphene Papers

Graphene papers have a potential to overcome the gap from nanoscale graphene to real macroscale applications of graphene. A unique process for preparation of highly conductive graphene thin paper by means of Ar⁺ ion irradiation of graphene oxide (GO) papers, with carbon/oxygen ratio reduced to 100:1, is presented. The composition of graphene paper in terms of carbon/oxygen ratio and in terms of types of individual oxygen‐containing groups is monitored throughout the process. Angle‐resolved high resolution X‐ray photoelectron spectroscopy helps to investigate the depth profile of carbon and oxygen within reduced GO paper. C/O ratios over 100 on the surface and 40 in bulk material are observed. In order to bring insight to the processes of oxygen removal from GO paper by low energy Ar⁺ ion bombardment, the gases released during the irradiation are analyzed by mass spectroscopy. It is proven that Ar⁺ ion beam can be applied as a technique for fabrication of highly reduced graphene papers with high conductivities. Such highly conductive graphene papers have great potential to be used in application for construction of microelectronic and sensor devices.     

BPC – A binary priority countdown protocol

In modern wireless ad hoc networks, with a high speed PHY, every collision means a significant loss of useful bandwidth. In the last few years different binary contention protocols have been introduced to address this problem. In this work we propose a novel binary contention protocol called binary priority countdown (BPC) protocol, whose goal is to reduce collisions as well as contention time. BPC uses a new priority countdown mechanism which exploits the efficiency of binary countdown, but the priority countdown process is not constrained to a single binary countdown round. This way, the priority space is not defined by the length of binary countdown round, like in other binary countdown protocols proposed in the literature, and arbitrary medium access priorities can be decremented through multiple binary countdown rounds if necessary. The ability of a new priority countdown mechanism to count down any priority number without changing the length of a binary countdown round, allows independent management of priority space. This “independence” of priority space introduces new optimization and adaptation possibilities. Collision memory effect is recognized and described. BPC protocol reveals connection between unary, binary and digit contention protocols. All three groups of protocols can now be seen as members of the same class of contention algorithms. Preliminary simulation results are shown.     

A high accuracy reactive power and reactive energy meter

Contents A high accuracy instrument for reactive power and reactive energy measurements in a single phase power network is described in the paper. The measurement principle is in accordance with IEC recommendation. Test results show that in the range of 1 to 100% of the input current the accuracy of the meter is better than 100 ppm for frequency variations of ±5% around the nominal frequency. The instrument could be used as a single-phase reactive power and reactive energy standard. A three phase version of the instrument could be used as a standard or as a revenue meter because of its high accuracy, simple design and anticipated low cost.

---

Ein Meßgerät höher Präzision zur Blindleistungs- und Blindverbrauchsmessung

Übersicht In diesem Artikel wird ein Meßgerätu zur Blindleistungs- und Blindenergiemessung in Einphasen-Wechselstromnetzen beschrieben. Das Meßprinzip stimmt mit der Vorschrift der IEC überein. Die Meßergebnisse zeigen, daß im Bereich von 1 bis 100% des Eingangsstroms bei Frequenzvariationen von ±5% von der Nennfrequenz die Meßfehler des Gerätes kleiner als 0.01% sind. Das Meßgerät könnte als ein Normal für Blindleistungs- und Blindenergievergleichsmessungen in Einphasensystemen verwendet werden. Eine Dreiphasenversion dieses Meßgerätes könnte wegen seiner hohen Genauigkeit und des einfachen und preiswerten Aufbaus als ein Normal oder als Verbrauchsmeßgerät für die Kostenberechnung benutzt werden.

---

---

Institute for National Measurement Standards, National Research Council     

Adaptive nonuniform polar quantization application to high quality speech compression

The logarithmic companding technique has shown to be extremely useful in speech quantization with rate of 8 bits/sample. However, for lower bit rates it is not the ideal solution for high quality speech coding. Because of that, in this paper we establish source coding scheme which enables better spectrum efficiency for input that has a large dynamic range. Since our wish is also to improve signal quality in comparison with quality defined with standards G.711 and G.712, we opt for adaptive technique application to the speech coding. Our research shows that proper design of forward gain-adaptive polar quantization can enable compression of about 1 bit/sample as well as significantly better quality than in case of using coder designed according to standard G.711. Furthermore, performances can be sustained over the whole speech dynamic range. Also, if the requisite speech quality is not supposed to be lower than G.712 standard quality, the achieved compression can be almost 1.5 bits/sample. Besides, we propose knew simple encoding rule which can additionally reduce bit rate for 0.1 bit/sample.     

Negative bias temperature instability in n-channel power VDMOSFETs

Negative gate bias is used in some applications for faster switching off the n-channel MOS devices. It is shown in this study that NBT stress-related instability in commercial n-channel power VDMOSFETs could be actually more serious than in corresponding p-channel devices. NBT stress is found to create equal V_T shifts in both device types, whereas the subsequent positive bias annealing results in more serious overall V_T instability in n-channel devices. The changes in the densities of stress-induced interface traps in two device types are equal as well, but significant amounts of NBT stress-induced border traps are only found in n-channel devices. All the results are discussed in terms of hydrogen reaction and diffusion model.     

Modeling of dibenzothiophene oxidative desulfurization using response surface methodology

The effect of reaction temperature, mixing speed and oxidant to catalyst volume ratio, including their interactions on the oxidative desulfurization of dibenzothiophene by using response surface methodology was studied. Hydrogen peroxide was used as oxidant and acetic acid as catalyst. The obtained model accurately predicts conversion of dibenzothiophene and the best conversion of 98.7% was observed at temperature 70°C, mixing speed of 1250 rpm and oxidant to catalyst volume ratio of 1:1. At high temperatures, a major limitation of the desulfurization process is the mass transfer and the high mixing speed is needed to achieve an efficient process.     

High Definition Digital Fabrication of Active Organic Devices by Molecular Jet Printing

We introduce a high resolution molecular jet (MoJet) printing technique for vacuum deposition of evaporated thin films and apply it to fabrication of 30 μm pixelated (800 ppi) molecular organic light emitting devices (OLEDs) based on aluminum tris(8‐hydroxyquinoline) (Alq₃) and fabrication of narrow channel (15 μm) organic field effect transistors (OFETs) with pentacene channel and silver contacts. Patterned printing of both organic and metal films is demonstrated, with the operating properties of MoJet‐printed OLEDs and OFETs shown to be comparable to the performance of devices fabricated by conventional evaporative deposition through a metal stencil. We show that the MoJet printing technique is reconfigurable for digital fabrication of arbitrary patterns with multiple material sets and high print accuracy (of better than 5 μm), and scalable to fabrication on large area substrates. Analogous to the concept of “drop‐on‐demand” in Inkjet printing technology, MoJet printing is a “flux‐on‐demand” process and we show it capable of fabricating multi‐layer stacked film structures, as needed for engineered organic devices.     

Algorithm for tissue ischemia estimation based on electrical impedance spectroscopy

The purpose of this paper is to present an algorithm developed for real-time estimation of skeletal muscle ischemia, based on parameters extracted from in vivo obtained electrical impedance spectra. A custom impedance spectrometer was used to acquire data sets: complex impedance spectra measured at 27 frequencies in the range of 100 Hz-1 MHz, and tissue pH. Twenty-nine in vivo animal studies on rabbit anterior tibialis muscle were performed to gather data on the behavior of tissue impedance during ischemia. An artificial neural network (ANN) was used to quantitatively describe the relationship between the parameters of complex tissue impedance spectra and tissue ischemia via pH. The ANN was trained on 1249, and tested on 946 ischemic tissue impedance data sets. A correlation of 94.5% and a standard deviation of 0.15 pH units was achieved between the ANN estimated pH and measured tissue pH values.