Experiences using lightweight formal methods for requirementsmodeling

The paper describes three case studies in the lightweight application of formal methods to requirements modeling for spacecraft fault protection systems. The case studies differ from previously reported applications of formal methods in that formal methods were applied very early in the requirements engineering process to validate the evolving requirements. The results were fed back into the projects to improve the informal specifications. For each case study, we describe what methods were applied, how they were applied, how much effort was involved, and what the findings were. In all three cases, formal methods enhanced the existing verification and validation processes by testing key properties of the evolving requirements and helping to identify weaknesses. We conclude that the benefits gained from early modeling of unstable requirements more than outweigh the effort needed to maintain multiple representations     

The Managerial Implications of Real-Time New Product Development in Financial Services

A review of the various models of New Product Development (NPD) process shows that although different approaches have been proposed, they are in fact all variants on a linear theme: some may include feedback loops, but they all essentially advocate that certain steps precede, or are preceded by, others. An inevitable consequence on the Internet/World Wide Web (WWW or Web) is that such models are no longer applicable. Based on the lessons learned from the development of a new financial service offered via the Internet, we show how such assumptions of linearity need no longer be a constraint. In addition, innovativeness is not related to firm size. But the fact that the Web allows for the real-time development of new financial services based on on-going feedback from potential and current customers raises a new set of managerial issues that have to be tackled. The objective of this paper is to use the context of the recent launch of an innovative financial service product via the Web to explore the managerial changes that are starting to affect the banking industry.     

Effect of dissolved tungsten on the deformation of 70Ni-30Fe alloys

A series of Ni-Fe alloys containing various levels of tungsten in solid solution have been prepared as a means to assess the influence of solid solution strengthening on the mechanical behavior of monolithic 70Ni-30Fe. In particular, 70Ni-30Fe alloys plus equilibrium concentrations of tungsten in solid solution nominally correspond to the compositions associated with the matrix-only portion of certain tungsten heavy alloys, that is, alloys comprised of a high volume fraction of nominally pure tungsten particles embedded within a minority Ni-Fe-W based matrix. The study shows that the working solubility of tungsten within the 70Ni-30Fe base composition increases slightly with temperature, from approximately 21 wt pct at room temperature to approximately 23 wt pct at 1400 °C. Increasing the level of tungsten in solid solution leads to increases in room-temperature yield strength, tensile strength, and ductility. In contrast, the deformation characteristics of the alloys, as quantified by the power-law work-hardening exponent, n, and the strain-rate-sensitivity exponent, m, show little variation with tungsten solute concentration.     

Updating Situation Models: Reply to Zwaan and Madden (2004).

E. J. O'Brien, M. L. Rizzella, J. E. Albrecht, and J. G. Halleran (1998) demonstrated that, consistent with the memory-based text processing view, outdated or incorrect information can be reactivated through a passive resonance process. Once reactivated, this outdated information can still influence comprehension. R. A. Zwaan and C. J. Madden (2004) suggested that the O'Brien et al. findings resulted from problems with the materials used. The present authors show that the possible "problems" identified by Zwaan and Madden do not adequately explain the findings of O'Brien et al. and that Zwaan and Madden's Experiment 3 lacks sufficient control or power to support their alternative interpretation of O'Brien et al. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Fluid, solid and fluid-structure interaction simulations on patient-based abdominal aortic aneurysm models

This article describes the use of fluid, solid and fluid-structure interaction simulations on three patient-based abdominal aortic aneurysm geometries. All simulations were carried out using OpenFOAM, which uses the finite volume method to solve both fluid and solid equations. Initially a fluid-only simulation was carried out on a single patient-based geometry and results from this simulation were compared with experimental results. There was good qualitative and quantitative agreement between the experimental and numerical results, suggesting that OpenFOAM is capable of predicting the main features of unsteady flow through a complex patient-based abdominal aortic aneurysm geometry. The intraluminal thrombus and arterial wall were then included, and solid stress and fluid-structure interaction simulations were performed on this, and two other patient-based abdominal aortic aneurysm geometries. It was found that the solid stress simulations resulted in an under-estimation of the maximum stress by up to 5.9% when compared with the fluid-structure interaction simulations. In the fluid-structure interaction simulations, flow induced pressure within the aneurysm was found to be up to 4.8% higher than the value of peak systolic pressure imposed in the solid stress simulations, which is likely to be the cause of the variation in the stress results. In comparing the results from the initial fluid-only simulation with results from the fluid-structure interaction simulation on the same patient, it was found that wall shear stress values varied by up to 35% between the two simulation methods. It was concluded that solid stress simulations are adequate to predict the maximum stress in an aneurysm wall, while fluid-structure interaction simulations should be performed if accurate prediction of the fluid wall shear stress is necessary. Therefore, the decision to perform fluid-structure interaction simulations should be based on the particular variables of interest in a given study.     

Improvements in planar feature reconstructions in atom probe tomography

Standard atom probe tomography spatial reconstruction techniques have been reasonably successful in reproducing single crystal datasets. However, artefacts persist in the reconstructions that can be attributed to the incorrect assumption of a spherical evaporation surface. Using simulated and experimental field evaporation, we examine the expected shape of the evaporating surface and propose the use of a variable point projection position to mitigate to some degree these reconstruction artefacts. We show initial results from an implementation of a variable projection position, illustrating the effect on simulated and experimental data, while still maintaining a spherical projection surface. Specimen shapes during evaporation of model structures with interfaces between regions of low- and high-evaporation-field material are presented. Use of two-and three-dimensional projection-point maps in the reconstruction of more complicated datasets is discussed.     

Spider orb webs rely on radial threads to absorb prey kinetic energy

The kinetic energy of flying insect prey is a formidable challenge for orb-weaving spiders. These spiders construct two-dimensional, round webs from a combination of stiff, strong radial silk and highly elastic, glue-coated capture spirals. Orb webs must first stop the flight of insect prey and then retain those insects long enough to be subdued by the spiders. Consequently, spider silks rank among the toughest known biomaterials. The large number of silk threads composing a web suggests that aerodynamic dissipation may also play an important role in stopping prey. Here, we quantify energy dissipation in orb webs spun by diverse species of spiders using data derived from high-speed videos of web deformation under prey impact. By integrating video data with material testing of silks, we compare the relative contributions of radial silk, the capture spiral and aerodynamic dissipation. Radial silk dominated energy absorption in all webs, with the potential to account for approximately 100 per cent of the work of stopping prey in larger webs. The most generous estimates for the roles of capture spirals and aerodynamic dissipation show that they rarely contribute more than 30 per cent and 10 per cent of the total work of stopping prey, respectively, and then only for smaller orb webs. The reliance of spider orb webs upon internal energy absorption by radial threads for prey capture suggests that the material properties of the capture spirals are largely unconstrained by the selective pressures of stopping prey and can instead evolve freely in response to alternative functional constraints such as adhering to prey.     

A Quantitative Study of the Relationship between Project Performance and BIM Use on Commercial Construction Projects in the USA

This article reports the findings of a quantitative study on the relationship between various project performance outcomes and the use of Building Information Modeling (BIM), within the commercial construction industry. The literature review identified inconsistent results among prior qualitative and quantitative work concerning the relationships of key project performance measures and BIM use. Data on 13 variables from 93 completed construction projects were collected and examined through a causal comparative research design. Projects that used BIM (in design or construction) were not found to experience significant performance outcomes when controlling for the contribution of other independent variables and covariates at the 95% confidence level (CL). At the lower 90% CL, however, projects using BIM in construction experienced significantly higher levels of schedule growth than projects that did not use BIM in construction. Recommendations are made for training of construction management staff as a step to avoid unwanted schedule growth associated with BIM use during construction. This study is one of a very small group of rigorous quantitative analyses of BIM project performance outcomes conducted to date; additionally, it is the only study that has analyzed BIM in a multivariate context that controlled for the contribution of other project variables not directly related to BIM use.     

Implications of Weak Link Effects on Thermal Characteristics of Transition-Edge Sensors

Weak link behavior in transition-edge sensor (TES) microcalorimeters creates the need for a more careful characterization of a device’s thermal characteristics through its transition. This is particularly true for small TESs where a small change in the bias current results in large changes in effective transition temperature. To correctly interpret measurements, especially complex impedance, it is crucial to know the temperature-dependent thermal conductance, G(T), and heat capacity, C(T), at each point through the transition. We present data illustrating these effects and discuss how we overcome the challenges that are present in accurately determining G and T from I–V curves. We also show how these weak link effects vary with TES size. Additionally, we use this improved understanding of G(T) to determine that, for these TES microcalorimeters, Kaptiza boundary resistance dominates the G of devices with absorbers while the electron-phonon coupling also needs to be considered when determining G for devices without absorbers