On the three-dimensional structure of WC grains in cemented carbides

In the present work, the size distribution and shape of WC grains in cemented carbides (WC–Co), with different Co contents, have been investigated in three dimensions. Direct three-dimensional (3-D) measurements, using focused ion beam serial sectioning and electron backscattered diffraction (EBSD), were performed and a 3-D microstructure was reconstructed. These measurements were supplemented by two-dimensional (2-D) EBSD and scanning electron microscopy on extracted WC grains. The data from 2-D EBSD collected on planar sections were transformed to three dimensions using a recently developed statistical method based on an iterative inverse Saltykov procedure. This stereological analysis revealed that the assumed spherical shape of WC grains during the Saltykov method is reasonable and the estimated 3-D size distribution is qualitatively in good agreement with the actual distribution measured from 3-D EBSD. Although the spherical assumption is generally fair, the WC grains have both faceted and rounded surfaces. This is a consequence of the relatively low amount of liquid phase during sintering, which makes impingements significant. Furthermore, the observed terraced surface structure of some WC grains suggests that 2-D nucleation is the chief coarsening mechanism to consider.     

Using X-ray microbeam diffraction to study the long-range internal stresses in aluminum processed by ECAP

Aluminum alloy 1050 was processed by equal-channel angular pressing (ECAP) using a single pass (equivalent uniaxial strain of about 0.88). Long-range internal stresses (LRISs) were assessed in the grain/subgrain interiors using X-ray microbeam diffraction to measure the spacing of {5 3 1} planes, with normals oriented approximately +27.3°, +4.9° and ?17.5° off the pressing (axial) direction. The results are consistent with mechanical analysis that suggests the maximum tensile plastic-strain after one pass is expected for +22.5°, roughly zero along the pressing axis, and maximum compressive strain for the ?67.5° direction. The magnitude of the measured maximum compressive long-range internal stress is about 0.13σ_a (applied stress) in low-dislocation regions within the grain/subgrain interiors. This work is placed in the context of earlier work where convergent beam electron diffraction was used to analyze LRISs in close proximity to the deformation-induced boundaries. The results are complementary and the measured stresses are consistent with a composite model for long-range internal stresses.     

Characterization of Novel Pathogenic Variants Causing Pyridox(am)ine 5′-Phosphate Oxidase-Dependent Epilepsy

Several variants of the enzyme pyridox(am)ine 5′-phosphate oxidase (PNPO), responsible for a rare form of vitamin B₆-dependent neonatal epileptic encephalopathy known as PNPO deficiency (PNPOD), have been reported. However, only a few of them have been characterised with respect to their structural and functional properties, despite the fact that the knowledge of how variants affect the enzyme may clarify the disease mechanism and improve treatment. Here, we report the characterisation of the catalytic, allosteric and structural properties of recombinantly expressed D33V, R161C, P213S, and E50K variants, among which D33V (present in approximately 10% of affected patients) is one of the more common variants responsible for PNPOD. The D33V and E50K variants have only mildly altered catalytic properties. In particular, the E50K variant, given that it has been found on the same chromosome with other known pathogenic variants, may be considered non-pathogenic. The P213S variant has lower thermal stability and reduced capability to bind the FMN cofactor. The variant involving Arg161 (R161C) largely decreases the affinity for the pyridoxine 5′-phosphate substrate and completely abolishes the allosteric feedback inhibition exerted by the pyridoxal 5′-phosphate product.     

Comparison of Oxidation Stability and Quenchant Cooling Curve Performance of Soybean Oil and Palm Oil

The potential use of vegetable oil-derived industrial oils continues to be of great interest because vegetable oils are relatively non-toxic, biodegradable, and they are a renewable basestock alternative to petroleum oil. However, the fatty ester components containing conjugated double bonds of the triglyceride structure of vegetable oils typically produce considerably poorer thermal-oxidative stability than that achievable with petroleum basestocks under typical use conditions. Typically, these conditions involve furnace loads of hot steel (850 °C), which are rapidly immersed and cooled to bath temperatures of approximately 50-60 °C. This is especially true when a vegetable oil is held in an open tank with agitation and exposed to air at elevated temperatures for extended periods of time (months or years). This paper will describe the thermal-oxidative stability and quenching performance of soybean oil and palm oil and the resulting impact on the heat transfer coefficient. These results are compared to typical fully formulated, commercially available accelerated (fast) and an unaccelerated (slow) petroleum oil-based quenchants.     

A study on the optimal fabrication method for micro-scale gyroscopes using a hybrid process consisting of electric discharge machining,chemical etching or micro-mechanical milling

For productive manufacturing of an accurate small-scale wine-glass gyroscope, a hybrid fabrication process consisting of either electric discharge machining, chemical etching, or micro-mechanical milling have been proposed. A comparison of silicon cavity fabrication processes has been conducted in terms of productivity, quality and geometrical accuracy, aiming at the use of the cavity as a mold for creating a thin wall diamond hemisphere, which is the main component of a wine-glass gyroscope. The results have shown that the EDM process, combined with chemical etching, can yield the highest productivity but with limited shape accuracy. The use of mechanical micro-milling, while less productive than EDM and etching, produces a superior quality and geometric accuracy.     

Different Expression of Mitochondrial and Endoplasmic Reticulum Stress Genes in Epicardial Adipose Tissue Depends on Coronary Atherosclerosis

The aim of our study was to analyze mitochondrial and endoplasmic reticulum (ER) gene expression profiles in subcutaneous (SAT) and epicardial (EAT) adipose tissue, skeletal muscle, and myocardium in patients with and without CAD undergoing elective cardiac surgery. Thirty-eight patients, 27 with (CAD group) and 11 without CAD (noCAD group), undergoing coronary artery bypass grafting and/or valvular surgery were included in the study. EAT, SAT, intercostal skeletal muscle, and right atrium tissue and blood samples were collected at the start and end of surgery; mRNA expression of selected mitochondrial and ER stress genes was assessed using qRT-PCR. The presence of CAD was associated with decreased mRNA expression of most of the investigated mitochondrial respiratory chain genes in EAT, while no such changes were seen in SAT or other tissues. In contrast, the expression of ER stress genes did not differ between the CAD and noCAD groups in almost any tissue. Cardiac surgery further augmented mitochondrial dysfunction in EAT. In our study, CAD was associated with decreased expression of mitochondrial, but not endoplasmic reticulum stress genes in EAT. These changes may contribute to the acceleration of coronary atherosclerosis.     

Purinergic Signalling in Allogeneic Haematopoietic Stem Cell Transplantation and Graft-versus-Host Disease

Allogeneic haematopoietic stem cell transplantation (allo-HSCT) is a curative therapy for blood cancers and other haematological disorders. However, allo-HSCT leads to graft-versus-host disease (GVHD), a severe and often lethal immunological response, in the majority of transplant recipients. Current therapies for GVHD are limited and often reduce the effectiveness of allo-HSCT. Therefore, pro- and anti-inflammatory factors contributing to disease need to be explored in order to identify new treatment targets. Purinergic signalling plays important roles in haematopoiesis, inflammation and immunity, and recent evidence suggests that it can also affect haematopoietic stem cell transplantation and GVHD development. This review provides a detailed assessment of the emerging roles of purinergic receptors, most notably P2X7, P2Y₂ and A_2A receptors, and ectoenzymes, CD39 and CD73, in GVHD.