The Silicon Backplane Design for an LCOS Polarization-Insensitive Phase Hologram SLM

Polarization-insensitivity is achieved in a reflective spatial light modulator by laying a quarter-wave plate (QWP) at the incident wavelength directly over the mirror pixels of a silicon backplane, and forming a nematic Freedrickcz cell over the QWP to modulate the reflected phase. To achieve the highest drive voltage from the available silicon process, a switched voltage common front electrode design is described, with variable amplitude square wave drive to the pixels to maintain constant root-mean-square drive and minimize phase fluctuations during the dc balance refresh cycle. The silicon has been fabricated and liquid-crystal-on-silicon cells both with and without the QWP assembled; applications include optically transparent switches for optical networks, beam steering for add-drop multiplexers for wavelength-division-multiplexing telecommunications, television multicast, and holographic projection.     

Pressure infiltration of boron nitride preforms with molten aluminum

The infiltration of compacted cubic BN (cBN) with molten aluminum has been investigated as a potential route for a cheap and easy method of manufacturing cBN/metal composites. CBN compacts have been infiltrated with molten Al at a temperature between 670 and 800 °C and pressure of 15 MPa in vacuum. At these temperatures no pronounced interactions between hexagonal and cubic BN with Al was observed, allowing the complete infiltration of cBN with 12 μm mean grain size. After infiltration at 800 °C, the temperature was increased without pressure to convert aluminum into borides and AlN. The hardness of the resulting materials depends on the content of hexagonal, cubic BN and the rate of conversion of Al into borides and AlN. The infiltration height of less than 1 mm obtained from infiltrating the 3 μm cBN powder green compacts gave a hardness of 22.0 ± 0.6 GPa after heat treatment.     

Pro Online-Durchsuchung

Zusammenfassung Die rasante Entwicklung des Internets bewirkt neben einer sich verst?rkenden Internationalisierung von Terrorismus und Organisierter Kriminalit?t einen Strukturwandel weltweiter Kommunikation und Datenspeicherung.     

A Radiation Imaging Detector Made by Postprocessing a Standard CMOS Chip

An unpackaged microchip is used as the sensing element in a miniaturized gaseous proportional chamber. This letter reports on the fabrication and performance of a complete radiation imaging detector based on this principle. Our fabrication schemes are based on wafer-scale and chip-scale postprocessing. Compared to hybrid-assembled gaseous detectors, our microsystem shows superior alignment precision and energy resolution, and offers the capability to unambiguously reconstruct 3D radiation tracks on the spot.     

Behavioral and subjective effects of D-amphetamine and modafinil in healthy adults.

Modafinil is indicated for the management of excessive daytime sleepiness; however, recent studies have examined a broad range of potential uses. Given that clinical uses of modafinil may be expanding, this study compared modafinil and d-amphetamine effects on subjective and performance measures. Across 11 sessions, 11 healthy adults were tested after oral doses of placebo (5 sessions), modafinil (1.75 mg/kg, 3.50 mg/kg, or 7.00 mg/kg), and d-amphetamine (0.035 mg/kg, 0.070 mg/kg, 0.140 mg/kg) under double-blind, randomized conditions. Assessments of cognitive performance and subjective effects were completed before drug administration, 30 min after drug administration, and at hourly intervals after drug administration for 5 hr. Modafinil increased ratings on the Amphetamine and Morphine Benzedrine Group scales of the Addiction Research Center Inventory (ARCI) and increased ratings on the Vigor and Total Positive scales of the Profile of Mood States. d-Amphetamine increased visual analog ratings of feeling stimulated and liking the drug and increased ratings on the Morphine Benzedrine Group scale of the ARCI. Both medications significantly reduced visual analog scale ratings of feeling sleepy, and modafinil decreased ratings on the ARCI Pentobarbital-Chlorpromazine-Alcohol Group scale. Both medications sustained performance that deteriorated across time on the Sternberg Number Recognition Test. Modafinil also enhanced performance rate on the Digit-Symbol Substitution Task above baseline levels and increased response rate on the Repeated Acquisition of Response Sequences Task. These results suggest that modafinil engenders alerting effects and increases performance in healthy non-sleep-deprived individuals comparable with that of d-amphetamine. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Scalable semantic brokering over dynamic heterogeneous data sources in InfoSleuth/spl trade/

InfoSleuth is an agent-based system for information discovery and retrieval in a dynamic, open environment. Brokering in InfoSleuth is a matchmaking process, recommending agents that provide services to agents requesting services. This paper discusses InfoSleuth's distributed multibroker design and implementation. InfoSleuth's brokering function combines reasoning over both the syntax and semantics of agents in the domain. This means the broker must reason over explicitly advertised information about agent capabilities to determine which agent can best provide the requested services. Robustness and scalability issues dictate that brokering must be distributable across collaborating agents. Our multibroker design is a peer-to-peer system that requires brokers to advertise to and receive advertisements from other brokers. Brokers collaborate during matchmaking to give a collective response to requests initiated by nonbroker agents. This results in a robust, scalable brokering system.     

Formation and retention of local melted films in AZ91 friction stir spot welds

The formation of local melted films during friction stir spot welding of as-cast AZ91D and thixomolded AZ91 material is investigated. The average temperatures close to the tip of the rotating pin vary from 438 to 454 °C during the dwell period in friction stir spot welding. These measured temperature values are higher than the melting temperature of α-Mg + Mg₁₇Al₁₂ eutectic (437 °C). It is suggested that the temperature in the stir zone during the dwell period is determined by the relative proportions of α-Mg and (α-Mg + Mg₁₇Al₁₂) eutectic material, which are incorporated during friction stir spot welding. Based on the stir zone temperature measurements and a detailed examination of material located at the root of the pin thread it is suggested that material is moved downwards via the pin thread and into the stir zone during the dwell period in friction stir spot welding. Evidence of local melted film formation is observed in the stir zone of AZ91 spot welds. It is suggested that melted films are retained since their dissolution rate is much slower in the high temperature stir zone than it is when melted films is formed in the stir zone during Al 7075-T6 friction stir spot welding. The spontaneous melting temperature, solute diffusion rate and the thermodynamic driving force for droplet dissolution are much higher during Al 7075-T6 friction stir spot welding.     

Evaluation of a proper controller performance for maximum-power point tracking of a stand-alone PV system

In this paper the implementation of a suggested stand-alone PV system, for maximum-power point tracking (MPPT), is carried out. Also, this paper presents a comparative study, through experimental work, between the conventional PI controller and the fuzzy logic controller (FLC) under different atmospheric conditions. The implemented system with both the PI controller and the FLC gives a good maximum-power operation of the PV array, but the tracking capability for different optimum operating points is better and faster for the case of using the FLC compared to the case of using the PI controller.     

Air flow through a non-airconditioned bus with open windows

Open window buses without air-conditioning are a major mode of urban and inter-city transport in most countries. High occupancy combined with hot and humid conditions makes travel in these buses quite uncomfortable. In this study air flow through a bus has been studied that could be the basis for low cost and eco-friendly methods of increasing passenger comfort and possibly reduce drag. The aerodynamics of such a road vehicle has not been studied as previous investigations have been confined to vehicles with closed windows that present a smooth exterior to air flow. Using a 1:25 scaled Perspex model of an urban bus in Delhi, flow visualization was performed in a water channel. The Reynolds numbers were one-tenth of a real bus moving at 10 m/s. Smoke and tuft visualizations were also performed on an urban bus at 40 km/h. Numerical simulations were performed at the actual Reynolds number. Even though there were Reynolds number differences, the broad features were similar. Air enters the bus from the rear windows, moves to the front (relative to the bus) and exits from the front windows. Inside air velocity relative to the bus is about one-tenth of the free-stream velocity. The flow is highly three-dimensional and unsteady.