The MiniWiD-Coater. III. Effect of Application Temperature on the Dissolution Profile of Sustained-Release Theophylline Pellets Coated with Eudragit Rs 30 D

Theophylline pellets were coated with Eudragit RS 30 D in a miniature fluid-bed pan coater called MiniWiD developed recently. The dispersions were plasticized with varying amounts of triethyl citrate (TEC), dibutyl phthalate (DBP), and polyethylene glycol 6000 (PEG) and applied at different temperatures ranging from 25 to 45 °C. Theophylline release was tested by dissolution using the USP Apparatus 2 (paddle) in 0.1 N hydrochloric acid under sink conditions over 6 hours.

At a coating level of 4 % (0.7 mg/cm²) sustained-release profiles were obtained from dispersions plasticized with TEC or DBP. By reducing the amount of plasticizer from 20 to 10%, films with higher permeabilities were obtained. This effect was compensated by tempering the pellets at 50 deg;C for 24 hours. The coating temperature had little effect on the dissolution profiles of TEC-plasticized films and no effect on films with DBP.

Coatings plasticized with 20% PEG were applied at temperatures ranging from 25 to 45 °C. These films required a coating level of about 18 % (3.3 mg/cm²) to provide comparable sustained-release properties. In contrast to DBP and TEC, a strong influence of the coating temperature on the release rates was observed in which higher temperatures led to slower release rates. This behavior can be explained by the minimum film-forming temperature (MFT). Since PEG does not lower the MFT of Eudragit RS 30 D, the application of these films below the MFT of 45 °C is associated with a lower degree of film formation.     

Irrigation Modelling in the Context of Basin Water Resources

Management practices for irrigation schemes can often be improved by modelling the behaviour of a scheme and by evaluating its efficiency statistics. However, looking at an irrigation scheme without regard for other water uses within the river basin may not be effective. Efficiencies computed in this way are local and, since water may be used many times within the same basin, may not be realistic. Changes in water uses (e.g. irrigation, industrial, power production, urban water supply, navigation, environmental, recreational) will often have effects on other uses; and changes in irrigation schemes (management,structural, crop pattern) may affect other users within the basin. In addition, all water users will be affected by external changes such as changes in land cover or in climate. As demand for water increases, these links become more important until, at some stage, there is insufficient water for all users and hard choices must be made. Hydrological modelling is a tool that can be used to relate irrigation schemes to the other water uses within a river basin and can help in assessing real productivities and in evaluating alternative patterns of water usage. This paper discusses the techniques available to simulate irrigation schemes within overall basin water resources using, as an example, an intensively utilized basin in western Turkey.     

Measurement and prediction of pressure drop in two-phase flow

Experimental data for air–water two-phase co-current flow in two different pipe diameters were used to test the prediction of pressure drop by a number of existing theories and correlations. Several models are shown to be useful for prediction, particularly with the stratified regimes which have proved difficult to handle in the past. The model suggested by Olujic proved to be of particular value.     

Synthesis and characterisation of carboxylic acid and diphenylphosphine derivatives in the 1,3-diyne series: Spectral properties of polydiacetylene carboxylates

Symmetrically substituted 1,3-diynes containing hydroxyalkyl ( 1a-d ), bromoalkyl ( 1e-h ) (diphenylphosphinyl) ( 1i-k ) and carboxyalkyl ( 2a-d ) substituents have been prepared and characterised; the phosphine derivative ( 1k ) has been converted with alkyl iodides ( RI ; R = Me, Et) into bis(phosphonium) salts ( 1l and m ). During preparation of the diynedioic acid. ( 2a ), the non-centrosymmetrical diyne, HO₂CCH₂C?C—C?C(CH₂)₂OH ( 3 ), was also isolated. ⁶⁰Co γ-Irradiation of diacetylene monomers ( 2a – d ) and 10,12-tricosadiyn-1-oic acid gave the corresponding polydiacetylene derivatives ( 4a – d and 5 ), respectively. Rubidium salts of ( 4c ) and ( 4d ), a barium salt of ( 4c ), and a potassium salt of ( 5 ) were prepared and isolated; soluble potassium salts of the carboxylic acid polymers ( 4 ) were generated in aqueous solution. The effects of changes in pH on the UV/visible absorption spectra of aqueous solutions of selected carboxylic acid polydiacetylenes have been recorded, and are discussed.     

Phosphorus Inputs to Lake Simcoe from 1990 to 2003: Declines in Tributary Loads and Observations on Lake Water Quality

Total phosphorus (TP) inputs to Lake Simcoe have led to hypolimnetic dissolved oxygen (DO) depletion and loss of cold water fish habitat. Since 1990, efforts have been made to reduce the total TP input to the lake below a defined target of 75 t/year, which was predicted to lead to reductions in spring TP concentration and improvements in end-of-summer hypolimnetic DO concentrations. The total TP load to the lake during the most recent period of record (1998/99-2003/04) ranged from 53 to 76 t/yr and averaged 67 t/yr, compared to an average of 114 t/yr estimated between 1990/91 and 1997/98 (range 85-157 t/yr). Reductions in TP loads from the catchment via tributary discharge (∼26 t) accounted for the majority of the decrease in total load between the two time periods. Total P concentrations decreased significantly in four out of six long-term monitored tributaries; however, concentrations in all six tributaries remain above the level recommended to avoid nuisance plant growth (30 μg/L). Although TP loads to the lake are currently below the target 75 t/yr, excessive growths of filamentous algae and macrophytes continue to be a problem in the nearshore zone. End-of-summer minimum hypolimnetic DO concentrations (average 4.3 mg/L, 1998/99-2003/04) remain substantially below the level (7 mg/L) that is considered protective of lake trout. Efforts to reduce TP loads to the lake therefore need to continue.     

Identification and modelling of aerobic hydrolysis – application of optimal experimental design

Hydrolysis mechanism plays a dominant role in the delicate balance of electron donor/electron acceptor ratios in BNR and EBPR systems as an important carbon source. In this study, the surface‐saturation‐type hydrolysis kinetics was investigated based on respirometric measurements, within the context of the theoretical and the practical identifiability of mathematical models. The identifiable parameters of a selected model were derived from respirograms. In addition, the information from the experiments was evaluated on the basis of Optimal Experimental Design (OED) methodology for different initial conditions of the batch respirometric experiment. © 2003 Society of Chemical Industry     

The warehouse scheduling problem: formulation and algorithms

The Warehouse Scheduling Problem is a deterministic multi-item inventory problem with a restriction on warehouse floor space available. We formulate a mixed integer nonlinear programming problem for the objective of minimizing long run inventory holding and order costs per unit of time. We integrate algorithms for staggering orders, described in companion papers, with a heuristic to choose the order sequences. The result is called Sequenced Staggering. We describe a new algorithm to generate order frequencies, called the powers-of-two-factor-of-three technique, as a generalization of Roundy's roundoff technique for powers-of-two policies. We report on a computational study of four hybrid algorithms for solving the warehouse scheduling problem, including the competing algorithm of Gallego, Queyranne, and Simchi-Levi. Based on these results, we recommend the combination of powers-of-two frequencies with Sequenced Staggering.     

The Manager as Pirate: An Inspection of the Gentle Art of Bootlegging

Bootlegging is a special type of innovation involving covert research without the explicit approval of the responsible manager. It incorporates a dimension of secrecy as this research does not appear on project sheets drawn up by the management of firms. But it might also incorporate the dimension of conspiracy if the innovative activity is pursued by a research team, and perhaps with wider tacit support. Bootlegging exists as a phenomenon in a large number of companies. Interview findings suggest that the attitudes of management towards bootlegging are determined by prevailing perceptions of uncertainty and knowledge about the nature of decision processes.