Compositional characteristics and experimental burning of selected Lower Palaeozoic limestones from the Prague Basin (Barrandian area,Czech Republic) suitable for the production of natural hydraulic lime

Bulletin of Engineering Geology and the Environment - Laboratory-scale experimental burning of three facial types of Devonian limestones from the Barrandian area (Czech Republic) revealed their...     

Investigation into the compaction of nanopowders and micropowders of silicon carbide in high-pressure apparatus

The results of the investigation into the compaction (sintering) of silicon carbide nanopowders and micropowders in a DO-138 high-pressure apparatus are presented. Compaction modes for both types of materials are identical (a pressure of 3.5–4.0 GPa, a temperature of 1600—1700°C, and a holding time of 10 s). The influence of cladding of SiC nanopowders and micropowders with titanium and titanium nitride on the properties of compacts (cakes) formed under the same sintering modes is investigated. It is established that, when compacting the silicon carbide nanopowder, cakes differ in regards to higher density, hardness, and lower porosity compared with the samples made of finely dispersed technical silicon carbide. A higher activity of titanium relative to SiC makes it possible to chemically associate the grains of the latter due to the formation of intermediate layers of titanium carbide between them. The resulting ceramics possesses a higher density, hardness, and wear resistance. The wear resistance of synthesized composites based on nano-SiC is higher than for a polycrystalline material based on silicon carbide micropowder by a factor of 4.5.     

Full theory of speckle displacement and decorrelation in the image field by wave and geometrical descriptions and its application in mechanics

Abstract

The paper describes the possibility of using the speckle pattern decorrelation for determination of small deformation tensor components of an elementary object surface area in an optical image field. The relationship between the small-deformation tensor and the speckle field displacement is analysed in detail. The studied problem is presented from the approximation viewpoint of both wave and geometrical optics.     

Optimization of processing parameters of medium density fiberboard using response surface methodology for multiwalled carbon nanotubes as a nanofiller

In the present work, medium density fiberboard (MDF) panels were produced using multiwalled carbon nanotubes (MWCNT) reinforced urea formaldehyde resin. Response surface methodology was employed to optimize the relationship between the three variables, viz. pressing time, percentage of UF resin and percentage of MWCNT, used in the fabrication of MDF, and the influence of variables on the internal bonding (IB) and modulus of rupture (MOR) was studied. The optimum conditions based on the IB strength were determined as 8.18 % of UF resin, pressing time of 232 s, and MWCNT of 3.5 %. Similarly, the optimized conditions for MOR are also reported in this paper.     

Recurrent concepts in data streams classification

This work addresses the problem of mining data streams generated in dynamic environments where the distribution underlying the observations may change over time. We present a system that monitors the evolution of the learning process. The system is able to self-diagnose degradations of this process, using change detection mechanisms, and self-repair the decision models. The system uses meta-learning techniques that characterize the domain of applicability of previously learned models. The meta-learner can detect recurrence of contexts, using unlabeled examples, and take pro-active actions by activating previously learned models. The experimental evaluation on three text mining problems demonstrates the main advantages of the proposed system: it provides information about the recurrence of concepts and rapidly adapts decision models when drift occurs.     

Comparison of the Flow of Permanent and Condensable Gases through an Asymmetric Porous Membrane

Porous inorganic membranes are usually composed of several layers, which are asymmetric with respect to the flow direction. For permanent gases, investigations about the influence of the flow direction on the mass flux through an asymmetric ceramic membrane were previously performed and can be found in literature. Mass flow differences between the two flow directions were calculated. Here the flow of condensable gases, i.e., of vapors, through the same membrane is analyzed and it is shown that the mass flow might be up to 40 % larger in one direction than in the other direction.     

Germanium-antimony-selenium-tellurium thin films: Clusters formation by laser ablation and comparison with clusters from mixtures of elements

Quaternary germanium-antimony-selenium-tellurium (Ge-Sb-Se-Te) thin films deposited from Ge_19.4Sb_16.7Se_63.9−xTe_x (x = 5, 10, 15, and 20) glass-ceramics targets by radio frequency magnetron sputtering were studied using laser ablation quadrupole ion trap time of flight mass spectrometry. Binary, ternary, and quaternary Ge_aSb_bSe_cTe_d clusters were formed and their stoichiometry was determined. By comparison of the clusters obtained from quaternary Ge-Sb-Se-Te thin films and those from ternary Ge-Sb-Te materials, we found that Ge-Te species are not detected from the quaternary system. Furthermore, Ge-Se and Se-Te species are missing in mass spectra generated from Ge-Sb-Se-Te thin films. From the Ge-Sb-Se-Te thin films, 16 clusters were detected while ternary Ge-Sb-Se glasses yielded 26 species. This might be considered as a signal of higher stability of Ge-Sb-Se-Te thin films which is increasing with a higher content of Te. The missing (Se₂⁺, Ge_aSb⁺ (a = 1–4), and GeSe_c⁺ (c = 1, 2)) and new (Ge⁺ and Sb_bTe⁺ (b = 1–3)) clusters may indicate that some of the structural features of the films (Ge₂Se_6/2 and Se₂Sb-SbSe₂) were replaced by (GeSe_4−xTe_x and SbSe_3−xTe_x) ones. In addition, when comparing the stoichiometry of clusters formed from Ge-Sb-Se-Te thin films with those from the mixtures of the elements, only Sb₃⁺ and SbSe⁺ were observed in both cases. The knowledge gained concerning clusters stoichiometry contributes to the elucidation of the processes proceeding during plasma formation used for the chalcogenide thin films deposition.     

Windshield recycling focused on effective separation of PVB sheet

The study is focused on windshield recycling process resulting in poly(vinyl butyral) (PVB) sheets with very low amout of remain glass particles. PVB sheets were obtained from worldwide manufacturer DuPont and then they were laminated by standard autoclaving process. One sample of PVB sheet was modified by multi‐functional organic acid in order to compare various levels of adhesion. Three‐stage technology was proposed for recycling PVB sheets. In the first‐stage laminated safety glass was mechanically cracked. In the second‐stage the adhesion reduction to minimal degree was followed by chemical‐physical assisted separation. It causes self‐release of the glass out of the PVB sheet. The third‐stage was mechanical peeling of the remaining glass from the PVB sheet which completed the recycling process. The optimal process conditions for the most effective delamination process were found. Delamination technology produces PVB sheet with minimal residual glass content (up to 300 ppm) and minimal change in PVB sheet properties. Described recycling technology is ecologically friendly (the effluent is fully recyclable as well) and could reduce the worldwide problem with windshield waste disposal. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39879.