A Rank Encoder: Adaptive Analog to Digital Conversion Exploiting Time Domain Spike Signal Processing

An electronic circuit is presented that encodes an array of analog input signals into a digital number. The digital output is a rank order code that reflects the relative strength of the inputs, but is independent of the absolute input intensities. In that sense, the circuit performs an adaptive analog to digital conversion, adapting to the average intensity of the inputs (i.e. effectively normalizing) and adapting the quantization levels to the spread of the inputs. Thus, it can convey essential information with a minimal amount of output bits over a huge range of input signals.As a first processing step the analog inputs are projected into the time domain, i.e. into voltage spikes. The latency of those spikes encodes the strength of the input. This conversion enables the circuit to conduct further analog processing steps by asynchronous logic.     

Electrically Activated Paper Actuators

This paper describes the design and fabrication of electrically controlled paper actuators that operate based on the dimensional changes that occur in paper when the moisture absorbed on the surface of the cellulose fibers changes. These actuators are called “Hygroexpansive Electrothermal Paper Actuators” (HEPAs). The actuators are made from paper, conducting polymer, and adhesive tape. They are lightweight, inexpensive, and can be fabricated using simple printing techniques. The central element of the HEPAs is a porous conducting path (used to provide electrothermal heating) that changes the moisture content of the paper and causes actuation. This conducting path is made by embedding a conducting polymer (PEDOT:PSS) within the paper, and thus making a paper/polymer composite that retains the porosity and hydrophilicity of paper. Different types of HEPAs (straight, precurved, and creased) achieved different types of motions (e.g., bending motion, accordion type motion). A theoretical model for their behavior is proposed. These actuators have been used for the manipulation of liquids and for the fabrication of an optical shutter.     

Rapid Combinatorial Synthesis and Chromatography Based Screening of Phosphorescent Iridium Complexes for Solution Processing

This work reports the combinatorial synthesis and screening of phosphorescent iridium complexes as solution processable emitters for OLEDs. The approach taken here allows for the rapid synthesis, isolation, spectroscopic characterization and identification of the libraries based on chromatographic methods. Subsequent analysis of the irradiation induced degradation provides insight on the stability of the complexes under continuous excitation. The method is versatile and can easily be applied to other metal complexes or organic dyes for various applications, e.g., in electroluminescence, photovoltaics and sensing.     

Miniaturized Flexible Electronic Systems with Wireless Power and Near‐Field Communication Capabilities

A class of thin, lightweight, flexible, near‐field communication (NFC) devices with ultraminiaturized format is introduced, and systematic investigations of the mechanics, radio frequency characteristics, and materials aspects associated with their optimized construction are presented. These systems allow advantages in mechanical strength, placement versatility, and minimized interfacial stresses compared to other NFC technologies and wearable electronics. Detailed experimental studies and theoretical modeling of the mechanical and electromagnetic properties of these systems establish understanding of the key design considerations. These concepts can apply to many other types of wireless communication systems including biosensors and electronic implants.     

Supramolecular Assembly of Aminoethylene‐Lipopeptide PMO Conjugates into RNA Splice‐Switching Nanomicelles

Phosphorodiamidate morpholino oligomers (PMOs) are oligonucleotide analogs that can be used for therapeutic modulation of pre‐mRNA splicing. Similar to other classes of nucleic acid‐based therapeutics, PMOs require delivery systems for efficient transport to the intracellular target sites. Here, artificial peptides based on the oligo(ethylenamino) acid succinyl‐tetraethylenpentamine (Stp), hydrophobic modifications, and an azide group are presented, which are used for strain‐promoted azide‐alkyne cycloaddition conjugation with splice‐switching PMOs. By systematically varying the lead structure and formulation, it is determined that the type of contained fatty acid and supramolecular assembly have a critical impact on the delivery efficacy. A compound containing linolenic acid with three cis double bonds exhibits the highest splice‐switching activity and significantly increases functional protein expression in pLuc/705 reporter cells in vitro and after local administration in vivo. Structural and mechanistic studies reveal that the lipopeptide PMO conjugates form nanoparticles, which accelerate cellular uptake and that the content of unsaturated fatty acids enhances endosomal escape. In an in vitro Duchenne muscular dystrophy exon skipping model using H2K‐mdx52 dystrophic skeletal myotubes, the highly potent PMO conjugates mediate significant splice‐switching at very low nanomolar concentrations. The presented aminoethylene‐lipopeptides are thus a promising platform for the generation of PMO‐therapeutics with a favorable activity/toxicity profile.     

Diindenoperylene derivatives: A model to investigate the path from molecular structure via morphology to solar cell performance

Efficient organic electronic devices require a detailed understanding of the relation between molecular structure, thin film growth, and device performance, which is only partially understood at present. Here, we show that small changes in molecular structure of a donor absorber material lead to significant changes in the intermolecular arrangement within organic solar cells. For this purpose, phenyl rings and propyl side chains are fused to the diindenoperylene (DIP) molecule. Grazing incidence X-ray diffraction and variable angle spectroscopic ellipsometry turned out to be a powerful combination to gain detailed information about the thin film growth. Planar and bulk heterojunction solar cells with C60 as acceptor and the DIP derivatives as donor are fabricated to investigate the influence of film morphology on the device performance. Due to its planar structure, DIP is found to be highly crystalline in pristine and DIP:C60 blend films while its derivatives grow liquid-like crystalline. This indicates that the molecular arrangement is strongly disturbed by the steric hindrance induced by the phenyl rings. The high fill factor (FF) of more than 75% in planar heterojunction solar cells of the DIP derivatives indicates excellent charge transport in the pristine liquid-like crystalline absorber layers. However, bulk heterojunctions of these materials surprisingly result in a low FF of only 54% caused by a weak phase separation and thus poor charge carrier percolation paths due to the lower ordered thin film growth. In contrast, crystalline DIP:C60 heterojunctions lead to high FF of up to 65% as the crystalline growth induces better percolation for the charge carriers. However, the major drawback of this crystalline growth mode is the nearly upright standing orientation of the DIP molecules in both pristine and blend films. This arrangement results in low absorption and thus a photocurrent which is significantly lower than in the DIP derivative devices, where the liquid-like crystalline growth leads to a more horizontal molecular alignment. Our results underline the complexity of the molecular structure-device performance relation in organic semiconductor devices.     

Fully differential operational amplifiers using CMOS compatible lateral bipolar transistors with improved common-mode regulation

A new bias circuit for a CMOS compatible lateral bipolar transistor differential pair is presented. The circuit compensates for all process and bias dependent variations of the lateral collector current to emitter current ratio alpha . Experimental results show that its application to a fully differential amplifier improves the precision of the common-mode output voltage regulation by at least an order of magnitude.<>     

Differenzierung pflanzlicher und tierischer Proteine durch isoelektrische Focussierung in Agarosegel

Zusammenfassung Am Beispiel von Fleisch-, Fischund Kartoffelproteinen wird über die Leistungsfähigkeit einer modifizierten Focussiermethode in Agarosegel berichtet. Bei erhöhtem Probendurchsatz lassen sich Analysendauer und Kosten senken.

---

Differentiation of plant and animal proteins by isoelectric focusing in agarose gel

Summary A modified time and cost saving method for isoelectric focusing of protein mixtures in agarose gel is described. The efficiency of the method is demonstrated by separation of meat, fish and potato proteins.

     

Clinical and hemodynamic criteria for use of the intra-aortic balloon pump in patients requiring cardiac surgery

In order to establish criteria for elective use of the intra-aortic balloon pump (IABP) in patients having cardiac surgery, we conducted a retrospective study of 43 patients who required counterpulsation, because of inability to be weaned from cardiopulmonary bypass, between May, 1972, and June, 1974. Patients in cardiogenic shock preoperatively were excluded. The 43 patients included 23 (Group A) who had severe preoperative left ventricular dysfunction with a mean cardiac index less than 1.8 L. per minute per square meter, ejection fraction less than 30 per cent, and end-diastolic pressure greater than 22 mm. Hg; 20 patients (Group B) had a combination of moderate cardiac dysfunction (cardiac index less than 2.2, ejection fraction less than 40, end-diastolic pressure less than 18) in the presence of acute infarction or severe aortic stenosis (gradient greater than 80 mm. Hg) with or without coronary disease. An inverse relationship was noted between survival and delay from completion of operation to the use of 1ABP. Thirty-two of 43 patients were weaned off bypass and were balloon assisted for 12 to 96 hours postoperatively; 25 patients were discharged (58 per cent). In Subgroup A, 14 of 23 (60 per cent) and, in Subgroup B, 9 of 20 (45 per cent) were long-term survivors. Based on these findings, 45 patients were operated upon between June, 1974, and December, 1975, with elective use of 1ABP and were assessed by serial hemodynamic studies. Sixteen had severe preoperative left ventricular dysfunction similar to Subgroup A and 29 had moderate dysfunction in combination with pathology similar to Subgroup B. Fifteen of these patients were hemodynamically unstable at time of arrival in the operating room; 1ABP was inserted under local anesthesia. Thirty-nine patients (87 per cent) were weaned off bypass and were hospital survivors. In Subgroup A, 13 of 16 (81 per cent) and, in Group B, 21 of 29 (72 per cent) were long-term survivors. Criteria for elective use of 1ABP in cardiac surgery should include severe preoperative left ventricular dysfunction or a combination of moderate dysfunction with coronary or valvular pathology. Elective 1ABP improves the survival with trivial iatrogenic morbidity.     

Radioimmunoassay, its value in clinical use: LH, FSH, progesterone, estrone, estradiol, estriol

The clinical value of hormone determinations and functional tests is presented. In regard to cyclical disruptions, foremost the anovulatory cycle with secondary amenorrhea primarily in mind, the important evaluation is that of the estrogen-gestagen test, followed by a determination of the plasma gonadotropins. For ovarian insufficiency, differential diagnosis between the hypothalamus, hypophysis, or disruptions in the feedback systems are most important. The clomisphene test is the primary means of radioimmunological evaluation of amenorrhea. This test enables one to determine which of the 3 functions above are showing a negative response to chemical stimuli. These tests are of great value in diagnostics and are also useful in evaluating the effectiveness of therapy. The main polemic is over whether it is most useful to evaluate the total estsrogens or the individual fractions. The same problem exists for progesterone. The main indication for the determination of total estogens, or fractions of estrone, estradiol, as well as progesterone is developmental control of medical ovulation release. The therapy of sterility cases also falls into this category. The exact determination of estrogen contents is not always possible, however, making reliability questionable. But the varied nature of their functions and the cost factors involved must remain important in evaluating them.