New two‐dimensional slope limiters for discontinuous Galerkin methods on arbitrary meshes

In this paper, we introduce an extension of Van Leer's slope limiter for two‐dimensional discontinuous Galerkin (DG) methods on arbitrary unstructured quadrangular or triangular grids. The aim is to construct a non‐oscillatory shock capturing DG method for the approximation of hyperbolic conservative laws without adding excessive numerical dispersion. Unlike some splitting techniques that are limited to linear approximations on rectangular grids, in this work, the solution is approximated by means of piecewise quadratic functions. The main idea of this new reconstructing and limiting technique follows a well‐known approach where local maximum principle regions are defined by enforcing some constraints on the reconstruction of the solution. Numerical comparisons with some existing slope limiters on structured as well as on unstructured meshes show a superior accuracy of our proposed slope limiters. Copyright © 2004 John Wiley & Sons, Ltd.     

Critical Shear Stress of Bimodal Sediment in Sand-Gravel Rivers

A new model for the critical shear stress and the transport of graded sediment is presented. The model is based on the size distribution of the bed surface and can be used to compute sediment transport rates in numerical simulations with an active layer model. This model makes a distinction between unimodal and bimodal sediments. It is assumed that all size fractions of unimodal sediments have the same critical shear stress while there is selective transport for the gravel fractions of bimodal sediments. A recently published laboratory transport data set is used to calibrate our model.     

Determination of scattering parameters of junctions associated with electromagnetic topology

This paper is dedicated to the determination of topological S parameters in the transmission line networks. We are especially interested in ideal junctions which consist of short circuit connections. For this type of junctions, it is impossible to deduce the S parameters from the usual impedance or admittance matrices which are not defined in this case. We suggest a method allowing a direct calculation of S. This procedure is described and then carried out for a two wire fork. At last, an experimental application is given for this model.     

Toward a narra-topography: A pilot study applied to Marguerite Duras' novelModerato Cantabile

Although lexical frequencies are familiar measures of stylistic and thematic analysis, only recently have some stylostatisticians been tempted to investigate the relationship between the frequency and topography of repeated lexical items. In the present paper the authors have turned to the study of the four focal types of discursive narratology, using Marguerite Duras'Moderato Cantabile. Their intent is to uncover aspects of narratological performance which further elucidate the communicative strategies in the story. Part 1 summarizes the problematic between frequency and topography. It describes how a topographical index can be computed for any repeated item and how a Global Topography Index (GTI) can summarize the major topographical characteristics of any text sequence. Part 2 presents a four-cell typology of narrational mode: a segmentation of the verbal chain into narrating and narrated speech acts, with each text sequence tagged according to its discursive function: overt sender intervention for story coherence or comment on the focal level of a narrating present; representation of discrete or unlocalized events on the focal level of a mimeticized past. In Part 3 the focal encodings are displayed in numerical and graphic form, first according to the eight surface chapter divisions and then according to twenty-six subsets of approximately equal length. The fluctuations of the topography indices are reviewed, with particular attention being paid to the manifestation of cluster effects. Although sender interventions predominate, the relativized behavior of each focal type contributes to a climactic unraveling of the intrigue in the final chapters. In conclusion, the authors stress the dichotomy between the calm surface of the chapters and the agitated tensions of the twenty-six subsets.     

An account of the systematic error in judging what is reachable.

An account of the postural determinants of perceived reachability is proposed to explain systematic overestimations of the distance at which an object is perceived to be reachable. In this account, these errors are due to a mapping of the limits of prehensile space onto a person's perceived region of maximum stretchability, in the context of a whole-body engagement. In support of this account, 6 experiments on the judged reachability of both static and dynamic objects are reported. We tentatively conclude that the mental imagery of action is grounded and calibrated in reference to multiple skeletal degrees of behavioral freedom. Accordingly, this calibration is a source of systematic error in reachability judgments. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Experimental Study of Alumina Particle Removal From a Plane surface

Micron and submicron alumina particles are often used for the mechanical polishing of the GaAs wafers processed in the microelectronic industry. A better understanding of the adhesion mechanisms is the key factor for the particle removal and for the optimisation of the industrial chemical cleaning. However, the nature and the strength of the complex interactions occurring between asymmetrical alumina particles and the surface remain unclear. Thus, an experimental study of the detachment of asymmetrical alumina particles in adhesive contact with a glass plate was done using a specially designed shear stress flow chamber. A series of experiments was performed to measure the shear stress necessary to remove individual alumina particles (of 3 and 0.3 µm nominal size) under various chemical solutions (diluted ammonia, surfactant and glycerol). Then the effects of the particle size, the resting time, the pH and the nature of the chemical solutions used for the removal of the alumina particles was characterised in terms of percentage of alumina particles detached. Results have shown that the longer the resting time, the more adherent the particles are. Moreover, it was found that the ammonia solution gives the best particle removal rate (80%) because of the strong repulsive electrostatic interactions between the alumina particles and the glass surface, both being charged negatively in a basic solution.     

Multiresidue method for pesticides in drinking water using a graphitized carbon black cartridge extraction and liquid chromatographic analysis

A general liquid-solid extraction procedure for the isolation of pesticides from groundwater and drinking water for high-performance liquid chromatography (HPLC) is presented. This simple and rapid procedure involved passing a 2-L sample through a 250-mg graphitized carbon black (Carbopack B) cartridge at a flow rate of 150-160 mL/min. By taking advantage of the presence of positively charged active centers on the Carbopack B surface, a stepwise elution system allowed the complete separation of base-neutral pesticides from acidic ones. After partial solvent removal, the components in the two fractions were separated and quantified by gradient elution, reversed-phase HPLC with ultraviolet (UV) detection. The performance of the Carbopack cartridge was compared with that of a 500-mg C-18 bonded silica cartridge. With the Carbopack cartridge, the grand mean measurement accuracy of the 35 pesticides considered was 95%. With the C-18 cartridge, the grand mean measurement accuracy of the analytes was 76%. Compared to the C-18 cartridge, additional advantages of using a Carbopack cartridge are that the extraction procedure is about 7 times shorter, no pH adjustment of the environmental sample is necessary for trapping acidic compounds, and one cartridge instead of two suffices to extract base-neutral and acidic pesticides, making the Carbopack cartridge more adaptable than the C-18 one for field use. The detection limits by this method of all the pesticides considered were between 0.003 and 0.07 micrograms/L.     

Increasing Reliability in Cable-Free Radio LANs Low Level Forwarding in HIPERLAN

Radio LANs are emerging in the computing world. They are supported by distinct configurations: on the one hand radio LANs with base stations and a wired backbone, on the other hand radio LANs implementing Intra-forwarding. Adding a new node in a radio LAN with Intra-forwarding, increases the reliability, while this reliability decreases with ad hoc or hub configurations. This advantage of Intra-forwarding is quantified. Intra-forwarding, as defined in the HIPERLAN standard, is based on a hop-by-hop policy and link check procedures. It is shown how point-to-point packets and broadcast packets are forwarded. The three basic components of Intra-forwarding needed to build and update the Intra-forwarding database are described. The originality of this approach is the use of multipoint relays which enable better scalability. The correctness of the Intra-forwarding protocol is proved and its cost is evaluated.     

Films and fibers of oriented single wall nanotubes

As-produced nanotubes form a light, fragile and isotropic soot. Different efforts are made to process nanotubes into macroscopic forms of more practical use and more controlled properties. We briefly review in this paper two methods recently proposed to make films of magnetically aligned nanotubes and fibers by using an electrophoretic method. Preferential orientation of the nanotubes in the plane of the films or along the fiber axis is an important feature of the obtained materials. Then we describe in details a different, spinning like, process for making fibers out of single wall carbon nanotubes. This process consists of dispersing the nanotubes in a surfactant solution, re-condensing the nanotubes in the flow of a polymer solution to form a nanotube mesh, and then collating this mesh to a nanotube fiber. The behaviors of the surfactant-stabilized dispersions, which are also presented, are critical for this process. The degree of nanotubes alignment in dried fibers has been characterized by X-ray scattering. It is found to be smaller than the alignment obtained in the previous materials. However, the processing is simpler and faster and potentially scalable for large-scale production.