A novel method for elimination of line-current harmonics insingle-stage PFC switching regulators

This paper studies a particular single-stage power-factor-correction (PFC) switching regulator employing a discontinuous-conduction-mode (DCM) boost-input cell and a continuous-current-mode (CCM) forward output cell. Although this single-stage PFC regulator can provide a reasonably high power factor when its PFC stage is operating in discontinuous mode, substantial reduction in line-current harmonics is possible by applying a suitable frequency-modulation scheme. This paper derives a frequency-modulation scheme and proposes a practical implementation using a simple translinear analog circuit. A quantitative analysis on the total harmonic distortion (THD) of the line current when the circuit is subject to a limited range of frequency variations is presented along with some considerations for practical design. Experimental data obtained from a prototype confirms the effectiveness of the proposed frequency-modulation scheme. The proposed analog translinear circuit allows custom integrated circuit implementation, making it a viable low-cost solution to the elimination of line-current harmonics in switching regulators     

Fracture mechanics of oilseed rape pods

The basic theory of linear elastic fracture mechanics was applied to the fracture of pods from six genetic lines of oilseed rape (Brassica napus). An experiment was designed to allow the energetics of the fracture process to be accurately determined. The work of fracture, toughness and fracture toughness of five experimental varieties and one common commercial variety (Apex) were measured. The values for the toughness (0.006–0.271 kJ m-2) and fracture toughness (0.026–0.233 MN m-3/2) obtained from each line were distinct from each other but broadly similar to those of other brittle materials. The toughness and fracture toughness of Apex were approximately midway between the lowest and highest values measured. This result indicates that there is scope for improving the fracture resistance of oilseed rape crops so as to reduce seed loss before and during harvest. The approach described would be useful in selecting fracture-resistant genetic lines to help to develop such crops. This revised version was published online in November 2006 with corrections to the Cover Date.     

Electric field effects on roto-vibrational transitions of13CD3OH1

We used a Stark-Optoacoustic cell and hybrid waveguide resonators to perform an Infrared and Far Infrared Stark Spectroscopy study on some transitions of¹³CD₃OH. Different behaviours of the transitions in the presence of a d.c. electric field were observed. The Stark splittings of six FIR laser lines ranging from 34 to 136 MHz/kVcm^?1 were determined. The analysis of the behaviour of the IR and FIR transitions in the presence of the external electric fields gives important and exclusive information on the levels involved in the transitions.     

Neural networks,rational functions,and realization theory

The problem of parametrizing single hidden layer scalar neural networks with continuous activation functions is investigated. A connection is drawn between realization theory for linear dynamical systems, rational functions, and neural networks that appears to be new. A result of this connection is a general parametrization of such neural networks in terms of strictly proper rational functions. Some existence and uniqueness results are derived. Jordan decompositions are developed, which show how the general form can be expressed in terms of a sum of canonical second order sections. The parametrization may be useful for studying learning algorithms.This work was supported by the Australian Research Council, the Australian Telecommunications and Electronics Research Board, and the Boeing Commencai Aircraft Company (thanks to John Moore).     

Inhibiting and deactivating effects of water on the selective catalytic reduction of nitric oxide with ammonia over MnOx/Al2O3

The effect of water on the selective catalytic reduction (SCR) of nitric oxide with ammonia over alumina supported with 2–15 wt.-% manganese oxide was investigated in the temperature range 385–600 K, with the emphasis on the low side of this temperature window. Studies on the effect of 1–5 vol.-% water vapour on the SCR reaction rate and selectivity were combined with TPD experiments to reveal the influence of water on the adsorption of the single SCR reactants. It turned out that the activity decrease due to water addition can be divided into a reversible inhibition and an irreversible deactivation. Inhibition is caused by molecular adsorption of water. TPD studies showed that water can adsorb competitively with both ammonia and nitric oxide. Additional kinetic experiments revealed that adsorbed ammonia is present in excess on the catalyst surface, even in the presence of water. Reduced nitric oxide adsorption is responsible for the observed reversible decrease in the reaction rate; the fractional reaction order changes from 0.79 in the absence of water to 1.07 in its presence. Deactivation is probably due to the dissociative adsorption of water, resulting in the formation of additional surface hydroxyls. As the amount of surface hydroxyls formed is limited to a saturation level, the deactivating effect on the catalyst is limited too. The additional hydroxyls condense and desorb in the temperature range 525–775 K, resulting in a lower degree of deactivation at higher temperature. A high temperature treatment at 775 K results in a complete regeneration. The amount of surface hydroxyls formed per unit surface area decreases at increasing MnO_x-loading. The selectivity to the production of nitrogen is enhanced significantly by the presence of gas phase water.     

An empirical study of information technology enabled business process redesign and corporate competitive strategy

Business process redesign (BPR) has been widely touted as a means for leveraging the power of information technology to change business processes radically, resulting in substantial improvements in organizational effectiveness and efficiency. This study represents an early attempt at examining the strategic nature of the phenomenon. Because BPR is radical change and has the ability to alter both the competitive and operational nature of the corporation, it is critical that BPR be coordinated with corporate strategy. Through a survey of information system executives, the relationships between corporate competitive strategy and three types of BPR – intrafunctional, interfunctional and interorganizational – were examined. It was found that organizations following a cost strategy tended to do more BPR projects on interfunctional processes. Furthermore, the positive effect of a cost strategy on interfunctional BPR was found to be strengthened by the degree of integration of IS and business planning. It was also found that while interorganizational BPR was not related to a specific strategy, it was strongly related directly with IS–business planning integration.     

The region Ser333-Arg356 of the alpha-chain of human C4b-binding protein is involved in the binding of complement C4b

Human C4b-binding protein (C4BP) functions as a cofactor to factor I in the degradation of C4b and accelerates the decay rate of the C4b2a complex. In this study we describe a monoclonal antibody directed against the alpha-chain of C4BP that inhibits the binding of C4b to C4BP. In order to identify the structural domain of the alpha-chain of C4BP that interacts with C4b, tryptic fragments of C4BP were generated. Amino acid sequence analysis of the fragments revealed that the residues Ser333-Arg356 of the alpha-chain of C4BP contain the epitope of this antibody, and as a consequence, that this part of the alpha-chain of C4BP is likely to be involved in the interaction with C4b.     

Attitudes of women of childbearing age towards prenatal diagnosis in southeastern France

The objective of this study was to explore women's attitudes towards prenatal diagnosis of trisomy 21 and to examine some of the factors possibly responsible for these attitudes before implementing in real practice serological screening of pregnant women at risk for trisomy 21. We carried out a telephone survey on a representative sample of women who had recently had a normal livebirth delivery in the Marseille district in 1990. The participation rate was 80 per cent and the average age of the mothers was 28.9 years. Among the 514 women interviewed, 78 per cent stated that they would ask for an amniocentesis for a 1 per cent risk of trisomy 21 at their next pregnancy. When adjusting for confounding factors, the decision to have or not to have an amniocentesis was found to depend not only on the women's attitude towards induced abortion, but also on their understanding of the risk involved and on the social context (knowing a handicapped child, discussion with the father). It also depended on the women's age and on what they knew about amniocentesis from the medical point of view. The risk of miscarriage can influence a woman's choice but this objection was not found to affect the women's decisions significantly in our survey. The data showed the existence of a high potential demand for fetal karyotyping.     

The MiniWiD-Coater. III. Effect of Application Temperature on the Dissolution Profile of Sustained-Release Theophylline Pellets Coated with Eudragit Rs 30 D

Theophylline pellets were coated with Eudragit RS 30 D in a miniature fluid-bed pan coater called MiniWiD developed recently. The dispersions were plasticized with varying amounts of triethyl citrate (TEC), dibutyl phthalate (DBP), and polyethylene glycol 6000 (PEG) and applied at different temperatures ranging from 25 to 45 °C. Theophylline release was tested by dissolution using the USP Apparatus 2 (paddle) in 0.1 N hydrochloric acid under sink conditions over 6 hours.

At a coating level of 4 % (0.7 mg/cm²) sustained-release profiles were obtained from dispersions plasticized with TEC or DBP. By reducing the amount of plasticizer from 20 to 10%, films with higher permeabilities were obtained. This effect was compensated by tempering the pellets at 50 deg;C for 24 hours. The coating temperature had little effect on the dissolution profiles of TEC-plasticized films and no effect on films with DBP.

Coatings plasticized with 20% PEG were applied at temperatures ranging from 25 to 45 °C. These films required a coating level of about 18 % (3.3 mg/cm²) to provide comparable sustained-release properties. In contrast to DBP and TEC, a strong influence of the coating temperature on the release rates was observed in which higher temperatures led to slower release rates. This behavior can be explained by the minimum film-forming temperature (MFT). Since PEG does not lower the MFT of Eudragit RS 30 D, the application of these films below the MFT of 45 °C is associated with a lower degree of film formation.