沿江圩区排涝水文计算实例

设计排涝模数的计算是圩区排涝规划的主要内容之一,它的大小决定了排涝站的装机容量和涵闸尺寸.本文推求了安徽省马鞍山市大公圩地区的排涝模数,是沿江圩区排涝水文计算的一个应用实例.     

Applying real options in investment decisions relating to environmental pollution

This study focuses on how to assess the optimal environmental investment decisions under economic and ecological uncertainty, and establishes the continuous time model using the real option approach to optimize environmental pollution policy. Unlike traditional cost benefit analysis, this work extends the model of [Pindyck, R.S., 2002. Optimal timing problems in environmental economics. Journal of Economic Dynamics and Control 26(9–10), 1677–1697], and attempts to identify the storage threshold of pollution stocks and the optimal timing for implementing environmental pollution decisions.     

Determining stress intensity factors of composites using crack opening displacement

The main purpose of this paper is to find the mixed-mode stress intensity factors of composite materials using the crack opening displacement (COD). First, a series solution of the composite material with a crack was used to evaluate COD values. Then, the least-squares method was used to calculate mixed-mode stress intensity factors. This algorithm can be applied to any method that generates or measures COD values. The major advantage of this method is that COD values very near the crack tip are not necessary. Both finite element simulations and laboratory experiments were applied to validate this least-squares method with acceptable accuracy if the even terms of the series solution are removed.     

High-yield synthesis of single-crystalline 3C-SiC nanowires by a facile autoclave route

Single-crystalline 3C-SiC nanowires have been synthesized in large scale through a one-step autoclave route by the reaction of SiCl₄, (C₅H₅)₂Fe and metallic Na at 500 °C. Electron microscopy investigations show that the nanowires have typical diameters of 15-50 nm, lengths up to several tens of micrometers and grow along the [111] direction. The possible growth mechanism of the nanowires is discussed.     

N-Type Field-Effect Transistors Using Multiple Mg-Doped ZnO Nanorods

Nanorod field-effect transistors (FETs) that use multiple Mg-doped ZnO nanorods and a SiO₂ gate insulator were fabricated and characterized. The use of multiple nanorods provides higher on-currents without significant degradation in threshold voltage shift and subthreshold slopes. It has been observed that the on-currents of the multiple ZnO nanorod FETs increase approximately linearly with the number of nanorods, with on-currents of ~1 muA per nanorod and little change in off-current (~4times10^-12). The subthreshold slopes and on-off ratios typically improve as the number of nanorods within the device channel is increased, reflecting good uniformity of properties from nanorod to nanorod. It is expected that Mg dopants contribute to high n-type semiconductor characteristics during ZnO nanorod growth. For comparison, nonintentionally doped ZnO nanorod FETs are fabricated, and show low conductivity to compare with Mg-doped ZnO nanorods. In addition, temperature-dependent current-voltage characteristics of single ZnO nanorod FETs indicate that the activation energy of the drain current is very low (0.05-0.16 eV) at gate voltages both above and below threshold     

Polarity control of GaN epilayers grown on ZnO templates

We report the successful growth of Ga-polar GaN epilayers on O-polar ZnO templates pre-deposited on c-sapphire. Prior to GaN growth, NH₃ is exposed onto the ZnO template. The polarity of the GaN layers is confirmed by etching of the surface and by conversion beam electron diffraction (CBED), while the O-polar ZnO is confirmed by CBED. It is suggested that the NH₃ pre-exposure helps form a Zn₃N₂ layer, which possesses inversion symmetry and inverts the crystal from anion polar to cation polar.     

Dynamic RSVP protocol

RSVP is a resource reservation setup protocol that can be used by a host to request specific QoS for multicast multimedia flows on the Internet. Multiprotocol label switching (MPLS) architecture also needs RSVP. The fact that the resolutions of the display system used in different receiver nodes might have different, multi-resolution characteristics is supported in the MPEG-4 standard, and the EZW compression algorithm can cease decoding at any point in the bitstream. However, RSVP does not provide a more flexible mechanism. In this article we propose an extension of RSVP to provide the needed mechanism, coined dynamic RSVP (DRSVP), to dynamically adjust reserved resources on nodes without much effort. It provides different video resolutions to different receiver nodes with different needed reserved resources. Therefore, it does not waste precious Internet resources to transmit unnecessary multimedia packets.     

25mm厚钢板产生层间撕裂的原因和防治

层间撕裂并非是厚板独有的质量问题 ,结合工程实例 ,分析 2 5mm厚低合金钢板产生层间撕裂的原因。通过对钢材的超声波探伤检测、化学成分分析和Z向性能检测 ,指出层间撕裂主要与节点设计不当和钢材内非金属夹杂物偏析、分层有关 ,并提出了预防措施。对产生裂纹的构件视严重情况提出了不同的修补处理方法     

Reinjection experiment at the matsukawa vapor-dominated geothermal field: Increase in steam production and secondary heat recovery from the reservoir

A reinjection experiment has been conducted in an attempt to sustain reservoir pressure and steam production and to extract remaining heat energy in the superheated reservoir in the Matsukawa vapor-dominated geothermal field. This experiment was undertaken because the increase in superheat of produced steam and the decline of steam production are the current major issues for stable operation of the power plant. Almost all the reinjected fluid into well MR 1 was recovered from well M5, and the steam production of well M5 has increased by approximately 67%.     

钢锭零能少氧化均热轧制的研究

根据计算机的辅助分析,采用新的钢锭传搁、注后强制水冷却、垫铁脱模等工艺后,入炉钢锭的热焓已超过开坯轧制需要,利用普通均热炉代替钢锭保温车,可完全依靠到钢锭自身潜热与显热进行均热。对不同锭型与钢种采用经试验的最佳时间均热后再轧制,收与保温车均热钢锭直接轧制相同的效果。