提高液态烃中丙烯收率的技术

简要介绍了国内外增产丙烯的工艺技术，如SCC，MGG，MOI等，并针对特定装置提出了如何采用提高吸收压力，降低吸收温度，改善补充吸收油质量等措施增加液态烃中丙烯收率，以满足市场对丙烯的需求。     

抗疟新药——蒿甲醚胶囊稳定性的研究

蒿甲醚为我国首创的一种抗疟特效药。用３种方法对蒿甲醚胶囊的稳定性进行了考察，结果表明本品室温避光条件下至少可保存２ａ。     

Mechanical and thermal properties of ceramic‐modified poly(amide imide)

Poly(amide imide)–epoxysilane (coupling agent) composites were reacted with silica, a condensation product of tetraethylorthosilicate (TEOS), by a sol–gel process and were then cast into films. After this procedure, the chemical characteristics and mechanical and thermal properties were measured. Fourier transform infrared showed that silica existed in the poly(amide imide) matrix. When a proper amount of silica was added to the poly(amide imide) matrix, the tensile strength, elongation, and toughness increased greatly. A poly(amide imide)/30 wt % epoxysilane composite with 20 wt % TEOS had the best mechanical properties. Thermogravimetric analysis under nitrogen and oxygen atmospheres indicated that the char contents increased with the amount of silica. The glass‐transition temperatures of the poly(amide imide)–silica nanocomposites were observed around 170–180°C with differential scanning calorimetry. This approach may be a new method for the low‐temperature thermal curing of poly(amide imide). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1780–1788, 2004     

微生物转化法合成L-酪氨酸

以对羟基苯甲醛、海因、氢氧化钠为原料 ,化学合成底物对羟基苯丙酮酸。采用来自大肠杆菌的天冬氨酸转氨酶对对羟基苯丙酮酸进行生物转化 ,并对转化条件进行了初步的研究 ,最终得到L-酪氨酸 ,转化率 75 %。     

Preparation and application of fluorocarbon polymer/SiO2 hybrid materials,part 1: Preparation and properties of hybrid materials

For this study, we first prepared a fluorocarbon polymer and its hybrid materials. We found that fluorocarbon copolymers can produce hydrogen bonds with SiO₂ to form hybrid materials. We also used thermogravimetric analyzer and tested the thermostabilities of the four products, which were ranked as follows: fluorocarbon copolymer/SiO₂ hybrid material > fluorocarbon polymer/SiO₂ hybrid material > fluorocarbon copolymer > fluorocarbon polymer. In addition, we found that, due to the inorganic SiO₂ used, the number of pores and the specific surface areas of the hybrid materials both increased. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1140–1145, 2007     

高纯聚氯化铝的制备及研究进展

近年来,随着现代水处理技术的迅速发展,高纯聚氯化铝作为一种优良的无机混凝剂受到了广泛关注。常规的聚氯化铝生产方法中,产品中的铁及其他重金属离子含量较高。因此,杂质含量的控制对生产高纯聚氯化铝尤为重要。归纳总结了5种主要的高纯聚氯化铝制备方法（直接合成法、净化法、电解法、凝胶法及热解活化法等）的研究进展及优缺点,指出了高纯聚氯化铝制备过程中存在的问题,最后展望了高纯聚氯化铝的发展趋势。     

Friction of linerboard based on recycled fiber

The purpose of this investigation was to study the origin of the differences in paper‐to‐paper friction of linerboards based on old corrugated containers (OCC). The sheets were subjected to two extraction stages and analyzed with respect to, surface roughness, and their content of low‐molecular‐mass lipophilic compounds (LLC). Friction was measured using a friction tester based on the horizontal plane principle. The surface roughness was measured using a Perthometer profiler and the low molecular mass lipophilic constituent of the paper sheets was determined by gas chromatography‐mass spectroscopy. The sheets were imaged using environmental scanning electron microscopy (ESEM), and the relative compositions of inorganic ions on the paper surfaces were determined by energy dispersive X‐ray spectroscopy (EDS). The results showed that a high amount of LLC in the sheets lead to low friction, due to lubrication. It was also observed that large CaCO₃ particles on the surface had a friction‐increasing effect, and that there was no relationship between the surface roughness and the friction. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1511–1520, 2002     

Comparison of relative viscosity measurement of polyvinylpyrrolidone in water by glass capillary viscometer and differential dual‐capillary viscometer

The relative viscosity (RV) of polyvinylpyrrolidone (PVP) with different molecular weights was measured with a glass capillary viscometer and with a differential dual‐capillary viscometer in water at different concentrations. For the differential dual‐capillary viscometer, RV increases with a decreasing flow rate, especially for high molecular weight PVP at a 1% concentration. A good agreement in the RV between the two methods can be obtained for PVP with different molecular weights and at various concentrations if an appropriate flow rate is selected for the differential dual‐capillary viscometer. Special precaution is needed when using the differential dual‐capillary viscometer to measure the viscosity of a pure solvent. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1312–1315, 2002     

Preparation and properties of heterocyclically conjugated poly(3‐hexylthiophene)–clay nanocomposite materials

A series of heterocyclically conjugated polymer–clay nanocomposite (PCN) materials that consisted of organic poly(3‐hexylthiophene) (P3HT) and inorganic montmorillonite (MMT) clay platelets were prepared by in situ oxidative polymerization with FeCl₃ as an oxidant. The as‐synthesized PCN materials were characterized by Fourier transform infrared (FTIR) spectroscopy, wide‐angle powder X‐ray diffraction (WAXRD), and transmission electron microscopy (TEM). The effects of the material composition on the anticorrosion, gas barrier, thermal stability, flammability, mechanical strength, and electrical conductivity properties of the P3HT and PCN materials were studied by electrochemical corrosion measurements, gas‐permeability analysis (GPA), thermogrametric analysis (TGA), limiting oxygen index (LOI) measurements, dynamic mechanical analysis (DMA), and a four‐point probe technique, respectively. The molecular weights of extracted and bulk P3HT were determined by gel permeation chromatography (GPC) with THF as an eluant. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3438–3446, 2004     

机组状态监测系统在天生桥一级电厂的应用

机组状态监测系统,不仅可以准确判断机组是否安全稳定运行,而且可以提前预警、故障诊断,为电厂的安全生产和计划检修提供了十分有效的指导。笔者以状态监测诊断系统为天生桥一级电厂3号机组振摆超标提供有效的解决方案为例,阐述机组状态监测系统在电厂中的应用。