An approach to calibrate incentives for continuity of supply in the Spanish electricity distribution system

This paper proposes an approach to calibrate incentives for continuity of supply in electricity distribution in Spain. This approach consists on the estimation of the impact of continuity of supply improvements on distribution network costs. For this purpose, distribution costs resulting from different continuity of supply requirements are computed by a reference network model (RNM). The results obtained from the RNM are used to estimate a cost-function that considers continuity of supply a cost driver for distribution costs. This methodology is applied to three Spanish areas of service (an urban one, a semi-urban one and a rural one) in such a way that differences in distribution costs caused by the characteristics of the area type can be taken into account. The analysis indicated that distribution costs are more sensitive to continuity of supply improvements in rural areas of service. It also demonstrated that the incentive for reducing number of service interruptions should be higher than the incentive for reducing duration of service interruptions. Finally, the current Spanish incentive scheme for continuity of supply was analyzed under the perspective of the proposed approach.     

Biochemical effects of administering shock loads of sucrose to a laboratory-scale anaerobic (UASB) effluent treatment plant

An experimental study was undertaken to determine the effects of administering shock loads of sucrose to a laboratory-scale anaerobic effluent treatment plant (UASB reactor) treating diluted landfill leachate. Administration of shock loads of 10 g l⁻ sucrose caused accumulations of up to 7 g l⁻¹ of l-lactate and the resultant acidity caused the pH value of the reactor effluent to drop from 7.2 to 4.7 which inhibited methanogenesis.Major disturbances in the composition of the biogas also occurred and, under the severest conditions, the biogas contained up to 30% (v/v) hydrogen.     

Congruence in the performance of model nitrifying activated sludge plants located in Germany,Scotland and Spain

A laboratory model nitrifying activated sludge plant treating OECD synthetic sewage was designed and constructed by each of three laboratories in Germany, Scotland and Spain in order to produce a sludge inoculum for 5 rapid toxicity bioassays. The plants were run for 3 years and produced sludge for the microbially based bioassays Vibrio fischeri bioluminescence, ATP luminescence and respiration, and, nitrification and enzyme inhibition. Although the initial sludge inoculum for the plants differed, as did some of the running conditions such as temperature regime, the sludge produced within the different countries had similar characteristics with respect to sludge age, total suspended solids and volatile suspended solids. Nitrification was generally maintained over the 3-year period although there were occasions when the process was inconsistent. Nitrification recovery was afforded by reseeding with a nitrifying sludge from a local wastewater treatment works (WWTW) or imposition of starvation conditions for a period of time. The sludge produced was used to carry out toxicity testing and results compared well with those using sludge from a WWTW. Overall, the use of sludge generated in the laboratory could be used for toxicity testing negating the need to resort to the use of natural WWTW sludge, which may contain a range of toxic substances due to uncontrolled industrial and domestic inputs and an unbalanced microbial consortium.     

Structural behaviour of a dry dock with pile-anchored bottom slab

In this article the analysis and theoretical interpretation of the results obtained in the observation of some cross sections of dock 21 of SETENAVE shipyards is described. The deformability of a large construction, whose behaviour showed marked interaction with the surrounding soil was studied. The overall behaviour is strongly affected by the behaviour of a vast zone of piles, densely distributed and subjected to strong tensile and compressive forces. The purpose of theoretical treatment of results obtained directly from the prototype, which are still quite rare, was to improve the knowledge needed for the design of this kind of structures. The interpretation of the results also provided a better knowledge of the behaviour of large groups of piles subjected to tensile forces, which are very difficult to study in the laboratory. The type of problem dealt with is not limited to dry docks anchored on piles. It also concerns other types of structures, either sunk or at earthfill level, such as large resevoirs, nuclear plants, etc.     

The role of vitamin D derivatives and retinoids in the differentiation of human leukaemia cells

The capabilities of 1alpha, 25-dihydroxyvitamin D3 (1,25(OH)2D3), and two novel vitamin D analogues, EB1089 and KH1060, to induce the differentiation of two established leukaemia cell lines, U937 and HL-60, were assessed alone or in combination with the retinoid compounds, 9-cis retinoic acid (9-cis RA) and all-trans retinoic acid (ATRA). The vitamin D derivatives acted to increase the differentiation of U937 and HL-60 cell cultures in a dose-dependent manner, as determined by nitroblue tetrazolium (NBT) reduction, with EB1089 and KH1060 being more effective than the native hormone. As an additional index of leukaemic cell differentiation, induction of expression of the phenotypic cell surface antigen, CD14, and the beta2-integrins, CD11b and CD18 by the vitamin D and retinoid compounds were monitored using fluorescence activated cell sorting (FACS) analyses. Following 96-hr treatment of U937 and HL-60 cells with 5 x 10(-10) M of the vitamin D derivatives, a striking increase in CD14 antigen expression was apparent, indicating the promotion by these compounds of a monocyte/macrophage lineage of cells. CD11b and CD18 antigen expression were also raised above control levels. In contrast, both retinoid compounds used at the higher concentration of 1 x 10(-8) M were not effective inducers of CD14 antigen expression. However, CD11b and CD18 were both readily increased in U937 and HL-60 cell cultures. Treatment of U937 cell cultures with the vitamin D compounds and the retinoids resulted in cooperative effects on induction of differentiation, with correlation by both NBT reduction and FACS analyses of CD14 antigen expression. The presence of 9-cis RA or ATRA appeared to contribute to the further increase of CD14 in these cells. HL-60 cell cotreatment with these compounds also displayed enhanced cooperative effects in phagocytic function by NBT reduction. However, analysis of CD14 revealed a dramatic diminution in HL-60 cells treated with the combinations of the vitamin D derivatives and the retinoids. Assessment of HL-60 cell morphology treated with these combinations demonstrated the presence of a mixed population of monocytes and granulocytes. CD11b and CD18 antigen expression was also enhanced in both cell lines with cotreatment. The ability of EB1089 and KH1060 to induce leukaemic cell differentiation may provide an additional option for therapeutic use alone or together with other differentiation agents such as 9-cis RA or ATRA.     

Comparison of matrix solid-phase dispersion and liquid-liquid extraction for the chromatographic determination of fenthion and its metabolites in olives and olive oils

Matrix solid-phase dispersion (MSPD) methodology has been developed to extract fenthion and its metabolites from olives and olive oils, and the technique compared with conventional liquid-liquid extraction (LLE). The method was applied to olives and olive oil samples obtained from olive groves treated with fenthion. Pesticide residues were analysed by gas chromatography (GC) using a nitrogen-phosphorus detector. Both extraction methods gave a linear response over the concentration range assayed (0.03-1 mg kg^-1 for MSPD and 0.1-1 mg kg^-1 for LLE). Recoveries and RSD (n = 6) values in olives were 85-112% and 2-6% for MSPD, and 68-108% and 4-16% for LLE, respectively. In the case of olive oil, recoveries and RSD (n = 6) values were 67-98% and 5-11% for MSPD, and 63-115% and 6-14% for LLE, respectively. When compared to LLE, the newly developed MSPD method was twice as sensitive and required 10 times less sample weight.