Adaptive infill sampling criterion for multi-fidelity optimization based on Gappy-POD

This paper presents a reformulation of the “Gappy Proper Orthogonal Decomposition” (Gappy-POD) multi-fidelity modeling approach and proposes an enrichment criterion associated with an adaptive infill algorithm. The latter is here applied to the study of the flight domain of the RAE-2822 transonic airfoil at two different levels of accuracy to demonstrate its ability to detect areas in a two-dimensional design space where the surrogate model needs improvement to better drive the optimization process.     

Studies on a New Concept of 3D Data Integration about Reaches and Forces of a Disabled Person on a Wheelchair (CAD Methods in Car and Market Ergonomics)

The article presents a new concept of combining the three dimensions (3D) of a person's manipulation space. The data concern information about the reach of the arms and biomechanical data about limiting the load of a disabled person sitting in a wheelchair. Measurement data were acquired empirically, on original measuring station. The data included, respectively, arms' reach (static and dynamic) or, alternatively, measurements of limiting forces. The obtained data were processed into virtual 3D surfaces of arms' reach and forces. These surfaces provide the required graphic model of anthropotechnical and biomechanical data. Developed model was utilized to perform a virtual analysis of the accessibility of a disabled person to technical means: in a market sale space and in the ergonomic analysis into the space of a personal car. The presented method of 3D graphic modeling of anthropometrical and biomechanical data can be universally applied in ergonomic designing of work stations not only for disabled persons. © 2011 Wiley Periodicals, Inc.     

Hydrophilic polycarbonate chips for generation of oil-in-water (O/W) and water-in-oil-in-water (W/O/W) emulsions

Modification of the surfaces of polycarbonate (PC) with the use of a solution of tin (II) chloride renders them hydrophilic. The surface draping is stable against exposure to water and to alcohols. Exposure to alkanes reduces but does not diminish the effect. The method is compatible—in using the same solvent and temperature—with the hydrophobic modification of PC (Jankowski et al. in Lab Chip 11:1151–1156, 2011). The combination of these methods makes it possible to generate single and multiple monodisperse emulsions with the use of flow-focusing junctions in systems made in PC—a material that is suitable for fabrication of multilayer, high-throughput microfluidic devices.     

Hydrophilic polycarbonate chips for generation of oil-in-water (O/W) and water-in-oil-in-water (W/O/W) emulsions

Modification of the surfaces of polycarbonate (PC) with the use of a solution of tin (II) chloride renders them hydrophilic. The surface draping is stable against exposure to water and to alcohols. Exposure to alkanes reduces but does not diminish the effect. The method is compatible—in using the same solvent and temperature—with the hydrophobic modification of PC Jankowski et al. ( Lab Chip 11:748–752, 2011). The combination of these methods makes it possible to generate single and multiple monodisperse emulsions with the use of flow-focusing junctions in systems made in PC—material that is suitable for fabrication of multilayer, high throughput microfluidic devices.     

Low-latency atomic broadcast in the presence of contention

The Atomic Broadcast algorithm described in this paper can deliver messages in two communication steps, even if multiple processes broadcast at the same time. It tags all broadcast messages with the local real time, and delivers all messages in the order of these timestamps. Both positive and negative statements are used: “m broadcast at time 51” vs. “no messages broadcast between times 31 and 51”. To prevent crashed processes from blocking the system, the -elected leader broadcasts negative statements on behalf of the processes it suspects () to have crashed. A new cheap Generic Broadcast algorithm is used to ensure consistency between conflicting statements. It requires only a majority of correct processes (n > 2f) and, in failure-free runs, delivers all non-conflicting messages in two steps. The main algorithm satisfies several new lower bounds, which are proved in this paper.     

On the robust control of nonlinear systems

In this paper we consider robust stabilization of the class of nonlinear plants of the form $$\dot x = f(x) + \sum\limits_{i = 1}^m {g_i } (x)u_i (t),$$ which are equivalent, under smooth state space coordinate transformations and nonlinear state feedback, to controllable systems. This approach is very sensitive for unknown parameters' values. Parameter adaptation may be used as a technique to robustify minimum-phase systems [3]. We give an example of a locally stable adaptive tracking system in which the last assumption is weakened. The minimum-phase plant considered in the paper is a current-controlled squirrel cage induction motor.     

Recommendation of RILEM Technical Committee 250-CSM: Test method for Textile Reinforced Mortar to substrate bond characterization

Textile Reinforced Mortar (TRM), also known as Fabric Reinforced Mortar or Fabric Reinforced Cementitious Matrix, composites are an emerging technology for the external repair and strengthening of existing structures. For most applications, the effectiveness of the TRM reinforcement relies on its bond performance. This recommendation identifies the best practice to characterize the bond behaviour of TRM. A shear bond test method is proposed to determine the peak axial stress (associated with the maximum load that can be transferred from the structural member to the externally bonded TRM reinforcement), the stress–slip relationship and the failure mode that controls the TRM-to-substrate load transfer capacity. Guidelines on specimen manufacturing, experimental setup, test execution, and determination of test results are provided.     

Low temperature co-fired ceramic (LTCC)-based biosensor for continuous glucose monitoring

This article presents design, fabrication and testing of a miniature ceramic-based biosensor which is destined for continuous glucose monitoring. It is fabricated using well known LTCC (low temperature co-fired ceramics) technology. The biosensor consists of a microreaction chamber, three thick-film electrodes and a microdialysis tube. The detection process is based on oxidation of glucose by molecular oxygen in the presence of enzyme - glucose oxidase, GOx. One of the reaction products is a hydrogen peroxide which is detected amperometrically during its oxidation at a working electrode. Computational fluid dynamics (CFD) analysis was used for optimization of the biosensor geometry and considerations of the influence of operating conditions (flow rate) on mass transfer (diffusion) of the glucose within the microreaction chamber. Tests of the developed LTCC-based biosensor indicate its linear response to glucose concentration up to 9 mM with a relatively high sensitivity of about 147 nA/mM. Moreover, the properties of the presented ceramic biosensor are compared with properties of a similar device made in silicon/glass and in Perspex^®.     

Consistent Sets of Secondary Structures in Proteins

Ab initio predictions of secondary structures in proteins have to combine local predictions, based on short fragments of the protein sequence, with consistency restrictions, as not all locally plausible predictions may be simultaneously true. We use the fact that secondary structures are patterns of hydrogen bonds and that a single residue can participate in hydrogen bonds of at most one secondary structure. Consistency of fixed-sized pieces of secondary structures is the easiest to approximate and we formalize it as 1-2 matching problem. Consistency of entire secondary structures is a version of set packing. We also investigate how to form a simple problem if we add the requirement that the secondary structure and the loops that connect them fit together in a metric space. Every problem that we investigated is MAX-SNP hard and it has a constant factor approximation. Computational experience suggests that in biological instances, we can find nearly optimal solutions using heuristics.