Evolution of strength, microstructure and mineralogical composition of a CKD–GGBFS binder

Characterization of a nontraditional binding material containing cement kiln dust (CKD) and ground granulated blast furnace slag (GGBFS) is discussed in this paper. Significant compressive strength was obtained for a CKD–GGBFS blend with 70% CKD and 30% GGBFS at a water-to-binder ratio of 0.40 after 2 days of curing at elevated temperature. Similar strength was also obtained for the samples subjected to normal moisture curing over a period of 28 days. The compressive strength increased with additional moist curing in both the cases. The microstructural and the mineralogical examinations show that the strength development was mainly due to the formation of calcium silicate hydrate (C-S-H). In addition to normal C-S-H, aluminum and magnesium incorporated C-S-H phases were also present in the CKD–GGBFS blends. The formation of ettringite appears to be a contributing factor in early age strength development of CKD–GGBFS binder.     

Reproducible,biocompatible medical materials from biologically derived polysaccharides: Processing and Characterization

Natural polysaccharides like chitosan and dextran have garnered considerable interest in biomedical applications due to their biocompatibility, biodegradability, and nontoxicity. Nonetheless, the development of a reproducible class of medical devices from these materials is challenging and has had limited success. Chitosan and dextran are inherently variable and synthesis using these materials is prone to inconsistencies. In this study, we put forward a robust product development regimen that allows these natural materials to be developed into a reproducible class of biomaterials. First, an array of validated characterization methods (Proton Nuclear Magnetic Resonance, titrations, Ultraviolet spectroscopy, Size Exclusion Chromatography—Multi-Angle Light Scattering, Size Exclusion Chromatography—Refractive Index, and proprietary methods) were developed that allowed rigorous specifications to be set for unprocessed chitosan and dextran, chitosan and dextran intermediates, and chemically modified materials—acrylated chitosan (aCHN) and oxidized dextran (oDEX). Second, a robust and reproducible synthesis scheme involving various in-process controls was developed to chemically modify the unprocessed polysaccharides. Third, purification methods to remove byproducts and low-molecular-weight impurities for both aCHN and oDEX were developed. The study presents a viable strategy for converting variable, natural materials into a reproducible class of biomaterials that can be applied in various biomedical applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48454.     

Optimization of Cellulase Production from Isolated Cellulolytic Bacterium: Comparison between Genetic Algorithms,Simulated Annealing,and Response Surface Methodology

The present study discusses optimization of cellulase production from isolated cellulolytic bacterium. A simulated annealing (SA) algorithm is proposed for optimization of these processes to achieve the desired production goal. The approach was compared to the use of evolutionary algorithms, i.e., genetic algorithms (GAs) and response surface methodology (RSM). Ochrobactrum haematophilum was identified as the isolated bacteria. Carboxymethyl cellulose (CMC) concentration, yeast extract, pH, and incubation temperature were the significant factors screened by Plackett–Burman design and further optimized using a central composite design. The optimum values obtained were CMC concentration = 4.76% (w/v), yeast extract = 2.03% (w/v), pH = 6.3, and temperature = 44.2°C. Carboxy methyl cellulase (CMCase) activity at these values was experimentally determined to be 3.55 ± 0.16 U/ml, which was 2.8 times than the unoptimized system (1.23 U/ml). The growth-associated and non-growth-associated Leudeking–Piret constants, α and β, were respectively determined to be 0.3943 and 0.0105. The Michaelis–Menten constants, V_max and K_m, were determined to be 0.67 µmol/min and 2.42 mg CMC/ml, respectively. The variable-sized SA seems to be the best alternative, outperforming the GAs, showing a fast convergence and low variability among the several runs for optimized production cellulose recovery. The SA models are found to be capable of better predictions of cellulase production. The results of the SA-based RSM model indicate that it is much more robust and accurate in estimating the values of dependent variables when compared with the GA-based RSM models and only RSM models.     

The glass transition behaviour and thermodynamic properties of amorphous polystyrene

The effect of molecular weight (MW) and thermal history on the heat capacity (c_p) of amorphous polystyrene over the temperature range from 200–440 K has been measured using differential scanning calorimetry (d.s.c.) General equations are given that show the influence of MW on c_p in both the glassy and liquid states. An enthalpic definition of the glass temperature reflects changes in the glass structure, due to thermal history, that are not found using conventional d.s.c. constructions. Thermodynamic and statistical mechanical theories give reasonable approximations to the observed T_g-MW curve but small systematic deviations are found. The effect of thermal history on T_g can be reproduced using a MW-dependent activation enthalpy.     

Friction stir scribe welding technique for dissimilar joining of aluminium and galvanised steel

Friction stir scribe technology, a derivative of friction stir welding, was applied for the dissimilar lap welding of an aluminium alloy and galvanised mild steel sheets. During the process, the rotating tool with a cobalt steel scribe first penetrated the top material – aluminium – and then the scribe cuts the bottom material – steel. The steel was displaced into the upper material to produce a characteristic hook feature. Lap welds were shear tested, and their fracture paths were studied. Welding parameters affected the welding features, including hook height, which turned out to be highly related to fracture position. Therefore, in this paper, the relationships among welding parameters, hook height, joint strength and fracture position are presented. In addition, the influence of zinc coating on joint strength was also studied.     

Effect of hook characteristics on the fracture behaviour of dissimilar friction stir welded aluminium alloy and mild steel sheets

ABSTRACT

Under tensile shear loading, fracture modes of dissimilar lap welds produced by friction stir scribe technology were studied. Three fracture modes were observed. For zone A fracture, the initial crack was restrained, and the joint ultimately fractured in the base mild steel. For zone B fracture, the initial crack progressed through the aluminium sheet just above the Al/steel interface. For zone C fracture, the initial crack proceeded along the steel hook to the aluminium sheet surface. Fracture mode and joint strength were greatly influenced by steel hook size, and the steel hook size was affected by welding parameters and tool scribe height. In this study, the experimental joint strength achieved the calculated joint load limit.     

Wind energy status and its assessment in Turkey

The increase in negative effects of fossil fuels on the environment has forced many countries, especially the developed ones, to use renewable energy sources. Currently the fastest developing energy source technology is wind energy. Because wind energy is renewable and environment friendly, systems that convert wind energy to electricity have developed rapidly. Wind energy is an alternative clear energy source compared to the fossil fuels that pollute the lower layer of atmosphere. Because wind energy will be used more and more in the future, its current potential, usage, and assessment in Turkey is the focus of this study.     

Efficiency of Urban Water Supply Utilities in India

The two parameters of services output of water utilities are the per capita water available for consumption and the hours for which water is supplied per day. However, water utilities in India differ on the level of these outputs substantially. This paper uses the data for water utilities in 31 cities to analyse their performance in delivery of services. Using data envelopment analysis, a measure of technical efficiency for various utilities is calculated. The results indicate that water utilities can increase the delivery of water on a per capita basis and increase the hours of supply per day by about 18%. Nearly 37% of the increase in services could result from changing the scale of operation. This paper also discusses if the institutional framework within which these utilities operate has implications on their efficiency.     

A Home-type (H-type) Cascaded Multilevel Inverter with Reduced Device Count: Analysis and Implementation

Abstract

Multilevel inverter (MLI) is increasingly recognized as a low distorted wave synthesizing power converter built using recent power semiconductor devices. However, MLIs suffer from the requirement of higher device count. In this paper, a 15-level Home-type (H-type) inverter topology is proposed to address this concern. The H-type inverter topology is cascaded to synthesize a higher number of levels in output voltage. Voltage ratings of the dc sources are designed to generate a large number of uniform steps in output voltage. Analysis of the proposed method is presented for required number of switches, dc voltage sources, driver circuits and blocking voltage of switches. Comparative study demonstrates that the suggested topology requires reduced device count compared to the similar topologies reported in the literature. Simulation and experimental studies have been carried out to validate the performance of proposed MLI topology.     

Economic comparison of current electricity generating technologies and advanced nuclear options

This analysis compares the cost of various electric grid scenarios at the national level over a one-year period. Scenarios include high renewable, zero nuclear, zero carbon, and deployment of advanced nuclear. Additionally, several carbon tax scenarios are explored in the model to further assess the cost generation if the current nuclear fleet retired. The cheapest scenarios were those that involved less reliance on conventional nuclear reactors and more molten salt reactors, renewables, or natural gas.