几种数据压缩算法的比较

对几种数据压缩算法进行了总结,并针对实验数据表对其压缩率进行了比较。     

Analytical expressions for intermodulation distortion of a MESFET small-signal amplifier using the nonlinear Volterra series

Using the nonlinear Volterra series representation, analytical expressions for the third-order intermodulation distortion power and intercept point for a MESFET small-signal amplifier are derived when its equivalent circuit is bilateral and includes the gate-to-drain capacitance (C_gd) explicitly as a nonlinear element. Previously developed analytical expressions treated C_gd as a linear element or incorporated it as a part of gate-to-source and drain-to-source capacitances (C_gs and C_ds). These new analytical expressions are then compared with experimental data and good agreement is obtained. The analytical expressions are also used to study the variation of intermodulation distortion with input power and frequency, and the effect of the individual nonlinear elements in the MESFET’s equivalent circuit.     

单频网分布式外辐射源雷达技术

外辐射源雷达的研究和应用正朝着由单收发对向多收发对体制发展。作为该型雷达的一种重要机会照射源,新一代数字广播电视广泛采用单频(或同频)网覆盖方式,其内在决定了基于此的外辐射源雷达是分布式和网络化的。鉴于照射源单频网配置下外辐射源雷达不同寻常的工作和处理方式,该文归纳提出了单频网分布式外辐射源雷达的概念,阐述了该型雷达的主要特性以及所面临的核心问题,并就部分关键技术讨论了若干可供尝试的解决方案,结合原理实验结果展示了该型雷达的可行性,最后提出了集外辐射源雷达探测网的四网融合的概念并展望了其应用前景。      

Half-Rate Duobinary Transmitter Architecture for Chip-to-Chip Interconnect Applications

For a high speed duobinary transmitter clock frequency defines the transmission limit. A conventional duobinary transmitter needs a clock frequency equal to the data rate. In this work we propose a duobinary transmitter that uses a clock frequency half of the output data rate and hence achieves double the transmission rate for a given clock frequency as compared to a conventional duobinary transmitter. In the proposed transmitter the duobinary precoder is integrated into the last stage of a tree structured serializer to combine two NRZ data streams at half the transmission data rate. Two modes for the precoder have been incorporated into the design. The first mode is applicable for data transmission over copper whereas the second mode is suitable for wavelength division multiplexed optical transmission. A DLL based clock multiplier unit is employed to produce the high frequency clock with 50% duty cycle needed for the precoding operation. It incorporates a clock generation logic with integrated duty cycle control. A charge pump with dynamic current matching and a high resolution PFD are employed to reduce static phase error in locking and hence achieves improved jitter performance. A new delay cell along with automatic mode selection is proposed. To cover a wide range of data rate, the DLL is designed for a wide locking range and maintains almost 50% duty cycle. The design is implemented in 1.8-V, 0.18 μm Digital CMOS technology with an f _T of 27 GHz. Simulations shows that, the duobinary transmitter circuit works up-to 10 Gb/s and consumes 60 mW of power.     

Characteristics of planar n-p junction diodes made bydouble-implantations into 4H-SiC

Double implantation technology consisting of deep-range acceptor followed by shallow-range donor implantation was used to fabricate planar n⁺-p junction diodes in 4H-SiC. Either Al or B was used as the acceptor species and N as the donor species with all implants performed at 700°C and annealed at 1650°C with an AlN encapsulant. The diodes were characterized for their current-voltage (I-V) and capacitance-voltage (C-V) behavior over the temperature range 25°C-400°C, and reverse recovery transient behavior over the temperature range 25°C-200°C. At room temperature, the B-implanted diodes exhibited a reverse leakage current of 5×10^-8 A/cm² at a reverse bias of -20 V and a carrier lifetime of 7.4 ns     

BN–Graphene Composites Generated by Covalent Cross‐Linking with Organic Linkers

Composites of boron nitride (BN) and carboxylated graphene are prepared for the first time using covalent cross‐linking employing the carbodiimide reaction. The BN_1–xG_x (x ≈ 0.25, 0.5, and 0.75) obtained are characterized using a variety of spectroscopic techniques and thermogravimetric analysis. The composites show composition‐dependent electrical resistivity, the resistivity decreasing with increase in graphene content. The composites exhibit microporosity and the x ≈ 0.75 composite especially exhibits satisfactory performance with high stability as an electrode in supercapacitors. The x ≈ 0.75 composite is also found to be a good electrocatalyst for the oxygen reduction reaction in fuel cells.     

某富含蛇纹石的低品位难选铜镍矿选矿工艺研究

针对某铜镍矿铜镍品位低,铜镍矿物嵌布粒度微细,共生关系复杂,蛇纹石含量高等特征,开展了选矿工艺试验研究。试验结果表明,采用预先脱除脉石-铜镍混合浮选流程,通过对含Ni 0.51%、含Cu 0.20%、含Co 0.02%的原矿进行选择性磨矿,利用MIBC预先脱除部分易浮脉石,碳酸钠作矿浆pH调整剂,CMC作MgO脉石的抑制剂,硫酸铜和丁基黄药分别作铜镍矿物的活化剂和捕收剂,全流程浮选闭路试验获得了含Ni 7.78%、Cu 2.91%、Co 0.24%,回收率分别为Ni 72.98%、Cu 66.57%、Co 51.29%的铜镍混合精矿。该工艺流程获得了较好的选别效果,实现了铜、镍、钴的有效回收。     

Influence of galvanic interaction between chalcopyrite and some metallic materials on flotation

Galvanic interactions between the grinding media and the ground mineral inside a ball mill could not only accelerate the media wear but also adversely affect the flotation response of the ground mineral. Rest potential, combination potential and galvanic current measurements were carried out to understand the probable electrochemical interactions between chalcopyrite and several metallic electrodes such as platinum, stainless steel, hyper steel, mild steel and cast iron. Flotation recovery of chalcopyrite was found to be significantly lowered when contacted with hyper steel, mild steel or cast iron prior to flotation unlike with platinum or stainless steel. The influence of the presence of collector during galvanic interaction as well as the effect of relaxation for fresh and galvanically interacted chalcopyrite samples were also studied with respect to its floatability. AES and ESCA analyses indicated that galvanic coupling of chalcopyrite with a hyper steel grinding medium resulted in the formation of hydroxide or oxide species of iron on the mineral surface. An electrochemical mechanism is proposed to explain the mineral-grinding media interaction and its effect on flotation.     

充填料浆的预脱水试验研究

通过理论分析和实验研究 ,首创并试验了多孔管滤网振动预脱水和分流沉降预脱水新技术 ,实现充填料浆的低浓度输送、高浓度充填。     

最新高速长途光纤通信系统中的色散控制

色散是限制光纤通信系统向远距离，大容量方向发展的关键因素，根据光纤通信系统中色散控制研究的最新成果，阐述了现代光纤通信系统中各类色散控制的机制，讨论了两种最新光纤通信系统中的色散控制问题。