Investigation of structural,optical, electrical,and magnetic properties of Fe-doped La0.7Sr0.3MnO3 manganites

In this work, the physical properties of nanocrystalline samples of La_0.7Sr_0.3Mn_1−xFe_xO₃ (0.0 ≤ x ≤ 0.20) perovskite manganites synthesized by the reverse micelle (RM) technique were explored in detail. The phase purity, crystal structure, and crystallite size of the samples were determined using X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. All the samples had rhombohedral crystal structure and crystallite size increased with increase in Fe content in La_0.7Sr_0.3MnO₃. The scanning electron micrographs (SEMs) exhibited smooth surface morphology and nonuniform shape of the particles. The optical properties studied using UV-visible absorption spectroscopy revealed a decrease in the absorbance and optical band gap with an increase in Fe content in La_0.7Sr_0.3MnO₃ compound. The temperature-dependent resistivity measurements revealed semiconducting nature of x = 0 and 0.1 samples up to the studied temperature range, while a metal-to-insulator transition was observed at higher Fe doping. Magnetic studies revealed weak ferromagnetism in all the samples and a reduction in the maximum magnetization with an increase in Fe content. A close correlation between electrical transport and magnetic properties was observed with the doping of Fe ion in La_0.7Sr_0.3MnO₃ at Mn site. These results advocate strong interactions associated with the double exchange mechanism among Fe³⁺ and Mn³⁺ ions.     

Polyphosphazenes—A Promising Candidate for Drug Delivery,Bioimaging, and Tissue Engineering: A Review

Synthetic polymer materials have been surged to the forefront of research in the fields of tissue engineering, drug delivery, and biomonitoring in recent years. Biodegradable synthetic polymers are increasingly needed as transient substrates for tissue regeneration and medicine delivery. In contrast to commonly used polymers including polyesters, polylactones, polyanhydrides, poly(propylene fumarates), polyorthoesters, and polyurethanes, biodegradable polyphosphazenes (PPZs) hold great potential for the purposes indicated above. PPZ's versatility in the synthetic process has enabled the production of a variety of polymers with various physico-chemical, and biological properties have been produced, making them appropriate for biomedical applications. Biocompatible PPZs are often used as scaffolds in the regeneration of skeleton, bones, and other tissues. PPZs have also received special attention as potential drug vehicles of high-value biopharmaceuticals such as anticancer drugs. Additionally, by incorporating fluorophores into the PPZ backbone to produce photoluminescent biodegradable PPZs, the utility of polyphosphazenes is further expanded as they are used in tracking the regeneration of the target tissue as well as the fate of PPZ based scaffolds or drug delivery vehicles. This review provides a summary of the evolution of PPZ applications in the fields of tissue engineering, drug delivery, and bioimaging in recent 5 years.     

A case study of long-term RO plant operation without chemical pretreatment

Described herein is a case study of long-term reverse osmosis (RO) plant operation without applying chemical pretreatments to the feed water. This project was undertaken with the financial support from the Department of Bio-Technology, New Delhi, and the work was carried out by a research team from Central Salt and Marine Chemicals Research Institute (CSMCRI), Bhavnagar (Gujarat), India. A prototype plant with a 30,000 L/d capacity was designed, manufactured, installed and operated at the village of Mocha-Gorsar, located in the Porbandar district, to provide drinking water. The village was to be developed as a model Bio-Village where other projects related to village problems are also operated by other research institutes. Thin-film composite (TFC) membrane-based RO technology was indigenously developed by the institute for treatment of brackish water and waste water for the first time in India; it was used successfully in this plant, which gave a typical NaCl rejection of about 95%. This is a typical case study of RO plant installation where physical methods of pretreatment such as sand and micron cartridge filters were used; no chemical pretreatment of feed was employed for long-term brackish water desalination study. The idea was to avoid the usage of chemicals, which concentrate in the effluent water, might affect the environment and may not suit the village community. Plant performance during 24 months of continuous operation with respect to variable feed salinity, membrane cleaning and regenerations is discussed.     

Reduced Maternal Erythrocyte Long Chain Polyunsaturated Fatty Acids Exist in Early Pregnancy in Preeclampsia

The present prospective study examines proportions of maternal erythrocyte fatty acids across gestation and their association with cord erythrocyte fatty acids in normotensive control (NC) and preeclamptic pregnancies. We hypothesize that maternal fatty acid status in early pregnancy influences fetal fatty acid stores in preeclampsia. 137 NC women and 58 women with preeclampsia were included in this study. Maternal blood was collected at 3 time points during pregnancy (16–20th weeks, 26–30th weeks and at delivery). Cord blood was collected at delivery. Fatty acids were analyzed using gas chromatography. The proportions of maternal erythrocyte α‐linolenic acid, docosahexaenoic acid, nervonic acid, and monounsaturated fatty acids (MUFA) (p < 0.05 for all) were lower while total n‐6 fatty acids were higher (p < 0.05) at 16–20th weeks of gestation in preeclampsia as compared with NC. Cord 18:3n‐3, 22:6n‐3, 24:1n‐9, MUFA, and total n‐3 fatty acids (p < 0.05 for all) were also lower in preeclampsia as compared with NC. A positive association was observed between maternal erythrocyte 22:6n‐3 and 24:1n‐9 at 16–20th weeks with the same fatty acids in cord erythrocytes (p < 0.05 for both) in preeclampsia. Our study for the first time indicates alteration in maternal erythrocyte fatty acids at 16th weeks of gestation which is further reflected in cord erythrocytes at delivery in preeclampsia.     

Chemical hydrodynamics of a downward microbubble flow for intensification of gas‐fed bioreactors

Bioreactors are of interest for value‐upgrading of stranded or waste industrial gases. Reactor intensification requires development of low cost bioreactors with fast gas–liquid mass transfer rate. Here we assess published reactor technology in comparison with a novel downward bubble flow created by a micro‐jet array. Compared to known technology, the advanced design achieves higher volumetric gas transfer efficiency (k_La per power density) and can operate at higher k_La. We measure the effect of four reactor heights (height‐to‐diameter ratios of 12, 9, 6, and 3) on the gas transfer coefficient k_L, total interfacial area a, liquid residence time distribution, energy consumption, and turbulent hydrodynamics. Leading models for predicting k_L and a are appraised with experimental data. The results show k_L is governed by “entrance effects” due to Higbie penetration dominate at short distances below the micro‐jet array, while turbulence dominates at intermediate distances, and finally terminal rise velocity dominates at large distances. © 2017 American Institute of Chemical Engineers AIChE J, 64: 1399–1411, 2018     

Waste Eggshell-Derived Calcium Oxide and Nanohydroxyapatite Biomaterials for the Preparation of LLDPE Polymer Nanocomposite and Their Thermomechanical Study

Waste eggshells were utilized to make calcium oxide (E-CaO) and hydroxyapatite (E-HAP). E-CaO obtained by heat treatment to eggshells was utilized for the synthesis of E-HAP. Melt compounding of E-CaO/E-HAP was performed with linear low-density polyethylene (LLDPE) on a Brabender Plastograph and ground the obtained formulation for injection molding. Addition of E-CaO/E-HAP in the LLDPE significantly enhanced the flame retardant ability and thermal stability of resultant composites. In the comparative study, E-HAP nanopowder-containing polymer composite showed increment in thermal and mechanical properties than the composite prepared using E-CaO.     

Antiandrogen and Antimicrobial Aspects of Coordination Compounds of Palladium(II), Platinum(II) and Lead(II)

Synthesis, characterization and antimicrobial activities of an interesting class of biologically potent macrocyclic complexes have been carried out. All the complexes have been evaluated for their antimicrobial effects on different species of pathogenic fungi and bacteria. The testicular sperm density, testicular sperm morphology, sperm motility, density of cauda epididymal spermatozoa and fertility in mating trails and biochemical parameters of reproductive organs have been examined and discussed. The resulting biologically active [M(MaL(n))(R(2))]Cl(2) and [Pb(MaL(n))(R(2))X(2)] (where, M = Pd(II) or Pt(II) and X = Cl or NO(3)) type of complexes have been synthesized by the reactions of macrocyclic ligands (MaL(n)) with metal salts and different diamines in 1:1:1 molar ratio in methanol. Initially the complexes were characterized by elemental analyses, molecular weight determinations and conductivity measurements. The mode of bonding was established on the basis of IR, (1)H NMR, (13)C NMR, (195)Pt NMR, (207)Pb NMR, XRD and electronic spectral studies. The macrocyclic ligand coordinates through the four azomethine nitrogen atoms which are bridged by benzil moieties. IR spectra suggest that the pyridine nitrogen is not coordinating. The palladium and platinum complexes exhibit tetracoordinated square-planar geometry, whereas a hexacoordinated octahedral geometry is suggested for lead complexes.     

Effect of Additives on the Electromechanical Properties of Pb(Zr,Ti)O3–Pb(Y2/3W1/3)O3 Ceramics

Dielectric and piezoelectric properties of 0.02Pb(Y_2/3W_1/3)O₃ 0.98Pb(Zr0.52Ti0.48)O3 ceramics doped with additives (Nb₂O₅, La₂O₃, MnO₂, and Fe₂O₃) were investigated. The grain sizes of these ceramics decreased with increasing amounts of additives. For additions of MnO₂ and Fe₂O₃, dielectric losses decreased, while for Nb₂O₅ and La₂O₃, these values increased. The maximum values of the mechanical quality factor Q_m were found to be 956 and 975 for additions of 0.9 wt% Fe₂O₃ and 0.7 wt% MnO₂, respectively, but donor dopants (Nb₂O₅ and La₂O₃) did not change the values of Q_m . On the other hand, the piezoelectric constant d₃₃ and the electromechanical coupling factor k_p decreased with additions of MnO₂ and Fe₂O₃, but improved with additions of Nb₂O₅ and La₂O₃.     

Indole‐based polymer and its silver nanocomposite as advanced antibacterial agents: synthetic path,kinetics of polymerization and applications

Atom transfer radical polymerization of 1‐allylindole‐3‐carbaldehyde (AIC) was studied by employing 2‐bromoisobutyryl bromide as initiator in toluene. It led to controlled radical polymerization of AIC, with an increase of molecular weight along with the conversion of the monomer, and a relatively narrow molar mass distribution was obtained, as determined by gel permeation chromatography. The living nature of poly(1‐allylindole‐3‐carbaldehyde) (PAIC) was confirmed by the chain extension polymerization whereas ¹H NMR analysis showed that the major population of PAIC retained the chain‐end functional group. PAIC and its silver nanocomposite were found to be biologically active against some tested bacterial pathogens. Minimum inhibitory concentration tests revealed that PAIC exhibited antibacterial activity against Staphylococcus aureus, Proteus mirabilis and Klebsiella pneumonae whereas PAIC/Ag nanocomposite showed antibacterial activity against Enterococcus faecalis and K. pneumonae. © 2012 Society of Chemical Industry