Synthesis and evaluation of ciprofloxacin-loaded carboxymethyl tamarind kernel polysaccharide nanoparticles

Nanotechnology is currently employed as a tool to fight more efficiently against human pathogens. Nanoparticles can be prepared from a variety of materials such as protein, biodegradable polymers and synthetic polymers. Tamarindus indica Linn. or tamarind is one of the most important biodegradable polymer. In the present study, chemically modified polymer of tamarind ‘carboxymethyl tamarind kernel polysaccharide’ (CMTKP) is used for the synthesis of nanoparticulate formulation. Antibacterial activity of CMTKP was analysed which was then enhanced by incorporating a flouroquinolone antibiotic, ciprofloxacin to it. Ciprofloxacin-loaded CMTKP nanoparticles were synthesised via ionotropic gelation technique. Nanosuspension so formed was lyophilised by addition of a cryoprotectant. Nanoparticles obtained were characterised for its particle size, morphology and stability. Interaction studies were confirmed by Fourier transform infrared spectroscopy (FT-IR). Antibacterial activities of ciprofloxacin, CMTKP and ciprofloxacin-loaded CMTKP nanoparticles were tested against two Gram negative and positive bacteria. The antibacterial assay results revealed greatest zone of inhibition by ciprofloxacin-loaded CMTKP nanoparticles in Micrococcus luteus. Toxicity analysis of the prepared formulation was carried out on vero cell lines via resazurin assay which revealed its minimum toxicity.     

Influence of Al doping in LaCoO3 on structural,electrical and magnetic properties

We report investigations on polycrystalline LaCo_1?x Al _x O₃ (x = 0–0.9) bulk samples. The solid state synthesized samples showed a coexistence of rhombohedral and monoclinic phases in the intermediate concentrations (0.2 ≤ x ≤ 0.5) and pure rhombohedral phase otherwise. The observed effect of Al doping on dc transport has been analysed on the basis of small polaron hopping mechanism. The magnetisation results presented give evidence of weak ferromagnetism and anomalous temperature dependence of coercivity which we associate to the canting of the localised high-spin Co(III) and anti-symmetric exchange interactions at low temperatures.     

Solid dispersion adsorbate technique for improved dissolution and flow properties of lurasidone hydrochloride: characterization using 32 factorial design

The aim of the present study was to improve the dissolution and flow properties of lurasidone hydrochloride (LH) by solid dispersion adsorbate (SDA) technique. Solid dispersions (SDs) of LH were prepared by fusion method using Poloxamer P188. The melt dispersion was adsorbed onto the porous carrier Florite (calcium silicate). A 3² factorial design was employed to quantify the effect of two independent variables, namely ratio of carrier (Poloxamer 188) and LH in SD and ratio of adsorbent (Florite) to SD. SDA granules of LH were studied for flow properties and characterized using differential scanning calorimetry, scanning electron microscopy, and X-ray diffraction. Tablets of optimized composition of SDA granules (equivalent to 20?mg of drug) and plain tablets were prepared by direct compression method. The dissolution studies were carried out in Mcllvaine buffer (pH 3.8) as per USFDA guidelines and characterized for parameters such as percent dissolution efficiency, t₅₀, and Q₃₀. Tablets prepared from SDA granules showed almost four-fold increase in cumulative percentage drug release as compared to tablets prepared from plain LH. The value of dissolution efficiency was enhanced from 49.60% for plain tablets to 94.15% for SDA tablets. SDA granules did not show any change in drug release and X-ray diffraction pattern after storage at 40?°C/75% of RH for 3?months, which confirms that Florite prevented conversion of drug from amorphous form to crystalline form improving physical stability of the amorphous state of LH.     

K–La–MgO as heterogeneous catalyst for synthesis of 3-(2-hydroxyethyl)-1,3-oxazolidin-2-one from diethanol amine and carbon dioxide

Cost-effective valorization of carbon dioxide into bulk and specialty chemicals using catalysis will be attractive in the foreseeable future. 1,3-Oxazolidin-2-one derivatives are one of the important classes of heterocyclic compounds which have wide applications in pharmaceutical industries due to their biological activities such as antibacterial, antimicrobial, antiseptic. Various synthetic routes are employed to prepare these compounds which include phosgenation, oxidative carbonylation, etc., which make use of polluting chemicals and homogeneous catalysts. The heterogeneous catalytic processes to synthesize these derivatives are quite limited. Thus, developing a green route which is environmental friendly is highly desirable. The current work deals with development of a heterogeneous reusable catalyst and its application to synthesize 1,3-oxazolidin-2-one derivatives using carbon dioxide as a C1 source. The fact that no use of promoter or organic co-catalyst is made in the current process makes the synthesis route more favorable. Pure La–MgO and K–La–MgO with different K loading (1, 3, 5, and 7 wt%) synthesized by combustion route were screened for carbonylation of diethanol amine. 5% K–La–MgO was found to be the best catalyst. The catalyst was well characterized in virgin form and after use by various analytical techniques like TEM, SEM, XRD, CO₂ and NH₃-TPD, BET surface area analysis. With 5% K–La/MgO, 72% conversion of diethanol amine was achieved with 100% selectivity of the desired product at optimum conditions, i.e., 150 °C, 5 wt% K–La/MgO catalyst loading of 0.02 g/cm³ and 2.0 MPa CO₂ pressure. Reaction mechanism was proposed and kinetic model developed. The apparent activation energy was calculated as 18.76 kcal/mol. The catalyst was robust and recyclable. The process is clean and green.     

Biomedical applications of thermally activated shape memory polymers

Shape memory polymers (SMPs) are smart materials that can remember a primary shape and can return to this primary shape from a deformed secondary shape when given an appropriate stimulus. This property allows them to be delivered in a compact form via minimally invasive surgeries in humans, and deployed to achieve complex final shapes. Here we review the various biomedical applications of SMPs and the challenges they face with respect to actuation and biocompatibility. While shape memory behavior has been demonstrated with heat, light and chemical environment, here we focus our discussion on thermally stimulated SMPs.     

The lithium intercalation process in the low-voltage lithium battery anode Li(1+x)V(1-x)O2

Lithium can be reversibly intercalated into layered Li(1+x)V(1-x)O(2) (LiCoO(2) structure) at ~0.1 V, but only if x>0. The low voltage combined with a higher density than graphite results in a higher theoretical volumetric energy density; important for future applications in portable electronics and electric vehicles. Here we investigate the crucial question, why Li cannot intercalate into LiVO(2) but Li-rich compositions switch on intercalation at an unprecedented low voltage for an oxide? We show that Li(+) intercalated into tetrahedral sites are energetically more stable for Li-rich compositions, as they share a face with Li(+) on the V site in the transition metal layers. Li incorporation triggers shearing of the oxide layers from cubic to hexagonal packing because the Li(2)VO(2) structure can accommodate two Li per formula unit in tetrahedral sites without face sharing. Such understanding is important for the future design and optimization of low-voltage intercalation anodes for lithium batteries.     

Preparation,characterization, and in vivo evaluation of nano formulations of ferulic acid in diabetic wound healing

Diabetes mellitus is most common disorder characterize by hyperglycemia. Chronic hyperglycemia may lead to over production of free radicals thereby results in oxidative stress which impaired healing of wounds. Ferulic acid (FA) has been shown to have antidiabetic and antioxidant properties. The aim of the present study was to develop Ferulic acid nanoparticles and to study its hypoglycemic and wound healing activities. Ferulic acid-poly(lactic-co-glycolic acid) (FA-PLGA) nanoparticles were prepared by nano precipitation method. The prepared FA-PLGA nanoparticles had an average size of 240?nm. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) analysis showed the prepared FA-PLGA nanoparticles were spherical in shape. Drug encapsulation assay showed that 88.49% FA was encapsulated in PLGA. Carbopol 980 was used to formulate FA-PLGA nanoparticles loaded hydrogel. FA-loaded polymeric nanoparticles dispersion (oral administration) and FA-loaded polymeric nanoparticles based hydrogel (topical administration) treated wounds were found to epithelize faster as compared with diabetic wound control group. The hydroxyproline content increased significantly when compared with diabetic wound control. Therefore, the results indicate that FA significantly promotes wound healing in diabetic rats.     

Novel Biodegradable and Biocompatible Poly(3‐hydroxyoctanoate)/Bacterial Cellulose Composites

Novel poly(3‐hydroxyoctanoate), P(3HO), and bacterial cellulose composites have been developed. P(3HO) is hydrophobic in nature whereas bacterial cellulose is extremely hydrophilic in nature. Therefore, homogenized bacterial cellulose has been chemically modified in order to achieve compatibility with the P(3HO) matrix. Modified bacterial cellulose microcrystals and P(3HO) have been physically blended and solvent casted into two‐dimensional composite films. Mechanical characterization shows that the Young's modulus of the P(3HO)/bacterial cellulose composites is significantly higher in comparison to the neat P(3HO) film. The melting temperature (T_m) of the composites is lower while the glass transition temperature (T_g) is higher than the neat P(3HO) film. Also, the composite film has a rougher surface topography as compared to the neat P(3HO) film. A month's in vitro degradation study has been carried out in Dulbeccos modified eagle medium and in phosphate buffer saline. The incorporation of modified bacterial cellulose microcrystal in the P(3HO) film has increased the degradability of the composite film. Finally, in vitro biocompatibility studies using human microvascular endothelial cells established the biocompatibility of the P(3HO)/bacterial cellulose microcrystal films. The cell proliferation was 50–110% higher on the P(3HO)/bacterial cellulose composites as compared to the neat P(3HO) film. Hence, in this study, for the first time, P(3HO)/bacterial cellulose composites have been developed. The addition of bacterial cellulose has resulted in properties that are highly desirable for medical applications including the development of biodegradable stents.     

Metal ion sensing and light activated antimicrobial activity of aloe-vera derived carbon dots

Carbon dots (CDs) have emerged out as a potential material amongst the carbon family for a wide range of applications including chemical/biological sensing, photocatalysis, bioimaging, etc. The green synthesis of these CDs from natural sources is gaining the significant interest of peer community for their wide utility. Herein, we present a facile one-step pyrolysis method for CDs synthesis from Aloe-Vera extract, which show bright blue luminescence under UV light with a quantum yield of 12.3%. Further, ex-situ morphological, structural and optical characterizations reveal their high quality and excitation independent emission behavior with the presence of carboxyl, hydroxyl functional groups. Furthermore, these CDs were studied for Fe(III) sensing in water without any surface modifications and assessed for their light activated antibacterial activity against E.Coli and Staphylococcus aureus.