Segregation and integration of cytoplasmic and nuclear materials during cleavage and induced fusion of blastomeres of mouse early embryos

Phenylbutazone was administered intravenously (i.v.) to a group of four lactating cows at a dosage of 6 mg/kg body weight. Whole plasma, protein-free plasma and milk were analysed for phenylbutazone residues. Pharmacokinetic parameters of total and free phenylbutazone in plasma were calculated using a non compartmental method. In regards to whole plasma data, the mean volume of distribution at steady state (Vss), was 147 mL/kg body weight, with a mean (+/-SEM) terminal elimination half-life (t1/2) of 40+/-6 h. The mean clearance (Cl) was 3 mL/h/kg body weight. The Vss as determined from the protein-free plasma fraction was 50021 mL/kg body weight. This larger Vss of free phenylbutazone compared to total plasma phenylbutazone was attributed to a high degree of plasma protein binding, as well as the greater penetration of free phenylbutazone into tissues. The mean t1/2 of free phenylbutazone was 39+/-5 h. This similarity to the t1/2 estimated from total plasma phenylbutazone data is attributed to an equilibrium between free and plasma phenylbutazone during the terminal elimination phase. Mean t1/2 as determined from milk, applying a urinary excretion rate model, was 47+/-4 h. Milk clearance of phenylbutazone was 0.009 mL/h/kg body weight, or about 0.34% of total body clearance. Furthermore, evidence suggests that phenylbutazone either binds to milk proteins, or is actively transported into milk, as its concentration in milk was greater than that predicted due to a simple partitioning from plasma into milk.     

Recruitment strategies in the women's health trial: feasibility study in minority populations. WHT:FSMP Investigators Group. Women's Health Trial:Feasibility Study in Minority Populations

The Women's Health Trial:Feasibility Study in Minority Populations (WHT:FSMP) examined the feasibility of recruiting postmenopausal women from a broad range of racial and socioeconomic backgrounds into a primary prevention trial requiring marked reductions in dietary fat. Postmenopausal women aged 50-79 yr who had no history of cardiovascular disease or cancer and who consumed 36% or more total energy from fat qualified to participate. We randomized the women into dietary intervention (60%) or control (40%) groups; we aimed to randomize 750 women in 18 months in each of the three clinical centers. All centers achieved goals for randomization based on ethnicity, and two centers exceeded overall recruitment goals. The greatest source of randomized participants was mass mailing, followed by items in the media, referrals, and community outreach. Recruitment yields were generally similar for the ethnic groups but lower for less-educated participants. The experience of WHT:FSMP indicates that postmenopausal women from the African-American, Hispanic, and non-Hispanic white communities can be recruited into dietary intervention studies for the prevention of disease.     

High temperature mechanical properties of single phase alumina

The creep properties of a commercial, single phase aIurnina have been determined in the temperature range of 1623 to 1723 K. The stress exponent,n, in the relationship ⁿ was determined to be 1.9 and the true activation energy was found to be 635 kJ mol^–1. Normal primary stage creep transients were observed up to strains of 1%. At low stresses, steady-state conditions were not obtained due to the occurrence of concurrent grain growth. It is shown that the steady state creep results are consistent with the occurrence of an interface controlled diffusionaI creep mechanism.     

A model for the compressive buckling of extended chain polymers

A model for the compressive buckling of an extended polymer chain is presented. The application of classical elastic instability analysis to an idealized polymer chain reveals that the bending rigidity and critical buckling loads for a chain are proportional to the force constants for valence bond angle bending and torsion. Highly oriented polymer fibres are treated as a collection of elastic chains that interact laterally. The critical stresses to buckle this collection of chains are calculated following a procedure developed to predict the compressive strengths of fibre-reinforced composites. This buckling stress is predicted to be equal to the shear modulus of the fibres and is the limiting value of compressive strength. Comparison of experimental and predicted values shows that the theory overestimates the compressive strength, but that there is a correlation of shear modulus with axial compressive strength. Consideration of flaws in both the theory and the material indicate that the compressive strength should be proportional to either the shear modulus or shear strength of the fibres.Nomenclature P axial compressive load (force) - P _cr critical buckling load (force) - M,M _i bending moments - l length of a link - p number of links - k elastic hinge constant - , _i angular rotation of hinges - L overall chain or column length - v,v _i lateral deflection of buckled chain or column - x, y, z Cartesian coordinate axes - E Young's modulus of isotropic column - I moment of inertia - a _ij matrix coefficients - A _p coefficient for exact buckling loads of chains - T energy change due to work of external load on buckled column or chain - U ₁ bending strain energy change of buckled column or chain - U ₂, U ₂ ^e , U ₂ ^s strain energy changes in elastic foundation, where e refers to extension mode buckling and s refers to shear mode buckling - E _t transverse modulus - G longitudinal shear modulus - b dimension associated with chain packing - A cross-sectional area per chain (=b ²) - f(x) curve fitted to shape of buckled chain - m,n,r integers - a _n coefficients of trigonometric series - _y normal strain iny-direction - _y normal stress iny-direction - xy shear strain inxy plane - xy shear stress inxy plane - u _x displacement inx-direction - u _y displacement iny-direction - V volume     

中区西部合理注水压力研究

注水压力是水驱油田注采压力系统中的重要参数,确定合理注水压力对调整层间矛盾、提高油田开发效果、降低套损等具有重大意义.合理的注水压力增加了吸水厚度和吸水层位,缓解了层间矛盾.注水压力过高导致吸水能力增强,降低了开发效果.高含水期的油藏注入压力一般通过实验获取.运用经验公式法和数值模拟法,在注水压力不超过地层破裂压力的情况下,计算该区块合理注水压力值,考察了脱气对原油黏度的影响进而对采收率的影响.该方法易于计算、精确度高,确定了中区西部合理注水压力值范围.结果 表明:中区西部合理注水压力为17.1～20.2 MPa时,有利于指导油田的高效开发.     

4,4′,4″-三氨基三苯胺的合成

本文从对氯硝基苯和对硝基苯胺出发,经过两步反应合成了三偶氮类光导材料的重要中间体4,4′,4″-三氨基三 苯胺,其中第一反应采用KF/季铵盐催化法,收率48.4％,第二步反应采用钯碳催化加氢法,收率91.4％。     

循环水冷却塔的改造

分析了循环水冷却塔存在的问题,重点论述了冷却塔的改造及其经济效益。     

Structural characterization of vulcanizates. Part VI. The 2-mercaptobenzothiazole-accelerated natural rubber–sulfur system

The crosslinking efficiency of sulfur in the vulcanization of natural rubber in the presence of 2-mercaptobenzothiazole, zinc oxide, and lauric acid has been determined as a function of cure time, cure temperature, and lauric acid concentration. With a low concentration of lauric acid structurally complex networks are formed, which contain 11–19 combined sulfur atoms per chemical crosslink present. The complexity increases with time of vulcanization. With a high lauric acid concentration much simpler networks are formed, which become progressively more simple as reaction proceeds (6 network-combined sulfur atoms per chemical crosslink, decreasing to 2.4 with time). Increasing the cure temperature from 100 to 140°C. reduces the efficiency of crosslinking in both cases. The changes in efficiency are attributed to the influences of the reaction variables (in particular, the concentration of rubber-soluble complexes of the zinc laurate with zinc benzothiazolyl mercaptide) on the structure and subsequent reactions of initially formed polysulfidic crosslinks.     

The degradation of polystyrene during extrusion

An investigation was made of the magnitude and mechanism of shear degradation of a narrow distribution, high molecular weight (M_w = 670,000) polystyrene. An Instron rheometer was used to perform the extrusion at temperatures from 164° to 250°C. The change in molecular weight distribution was studied by gel permeation chromatography. The maximum shear stress employed was 5.83 kg/cm². It was found that degradation could be induced at high stress at temperatures of 50°C lower than degradation of polystyrene would occur exclusively due to thermal forces. An activation energy for the degradation, calculated at constant shear rate, was +20.2 kcal/mole. The direction and magnitude of this value are consistent with degradation induced through a mechanical reduced activation for thermal degradation.