Exploring Variability and Performance in a Sub-200-mV Processor

In this study, we explore the design of a subthreshold processor for use in ultra-low-energy sensor systems. We describe an 8-bit subthreshold processor that has been designed with energy efficiency as the primary constraint. The processor, which is functional below V_dd=200 mV, consumes only 3.5 pJ/inst at V_dd=350 mV and, under a reverse body bias, draws only 11 nW at V_dd=160 mV. Process and temperature variations in subthreshold circuits can cause dramatic fluctuations in performance and energy consumption and can lead to robustness problems. We investigate the use of body biasing to adapt to process and temperature variations. Test-chip measurements show that body biasing is particularly effective in subthreshold circuits and can eliminate performance variations with minimal energy penalties. Reduced performance is also problematic at low voltages, so we investigate global and local techniques for improving performance while maintaining energy efficiency.     

Effect of Ultrasonic Shot Peening on Microstructure and Mechanical Properties of High-Nitrogen Austenitic Stainless Steel

The effect of ultrasonic shot peening (USSP) was studied on microstructural modification and mechanical properties such as microhardness, yield strength, tensile strength, and low cycle fatigue (LCF) life of a nitrogen stabilized austenitic stainless steel, at room temperature. There was grain refinement up to nano scale in surface region of the shot peened specimens and the microhardness was increased markedly up to the depth of approximately 100 µm. There was insignificant increase in yield and tensile strength, but drastic reduction in LCF life, particularly at low strain amplitude, from USSP. The nominal increase in yield and tensile strength was due to grain refinement in the surface region and drastic fall in LCF life was due to surface cracking resulting from USSP.     

Effect of microwave pretreatment of mixed culture on biohydrogen production from waste of sweet produced from Benincasa hispida

To enhance the production of biohydrogen from biomass, various pretreatment methods play important role. In this study, effect of microwave irradiation on the culture was studied on biohydrogen production from Benincasa hispida (Petha) solid waste at different powers for a fixed interval of time. The highest power studied was 800 W with a frequency of 2450 MHz. The amount of soluble sugars found in the waste was 13.9 mg/L having the chemical oxygen demand (COD) of 3000 mg/L. Studies have been performed in batch reactors using mixed consortia and results were also compared with the reactor operated at the normal conditions i.e. without any inoculum pretreatment. Maximum hydrogen produced was 14 mmol H₂ per mol of soluble sugar consumed in the reactor in which the inoculum was exposed to 320 W of microwave for 5 min. SEM analysis of this microwave pretreated culture was done.     

Influence of Cobalt Doping on the Physical Properties of Zn<Subscript>0.9</Subscript>Cd<Subscript>0.1</Subscript>S Nanoparticles

Zn_0.9Cd_0.1S nanoparticles doped with 0.005–0.24 M cobalt have been prepared by co-precipitation technique in ice bath at 280 K. For the cobalt concentration >0.18 M, XRD pattern shows unidentified phases along with Zn_0.9Cd_0.1S sphalerite phase. For low cobalt concentration (≤0.05 M) particle size, d _XRD is ~3.5 nm, while for high cobalt concentration (>0.05 M) particle size decreases abruptly (~2 nm) as detected by XRD. However, TEM analysis shows the similar particle size (~3.5 nm) irrespective of the cobalt concentration. Local strain in the alloyed nanoparticles with cobalt concentration of 0.18 M increases ~46% in comparison to that of 0.05 M. Direct to indirect energy band-gap transition is obtained when cobalt concentration goes beyond 0.05 M. A red shift in energy band gap is also observed for both the cases. Nanoparticles with low cobalt concentrations were found to have paramagnetic nature with no antiferromagnetic coupling. A negative Curie–Weiss temperature of −75 K with antiferromagnetic coupling was obtained for the high cobalt concentration.     

Effect of packaging under vacuum or under nitrogen on the keeping quality of Danedar khoa

A khoa variety popularly known as Danedar khoa, which has a very short life under ambient conditions, was studied for its shelf life at room and refrigerated temperatures under controlled conditions after packaging in a flexible material (poster paper/aluminium foil/low-density polyethylene [LDPE]). The samples were observed periodically for characteristics such as moisture content, peroxide value, titratable acidity and overall acceptability. Samples packed under nitrogen and stored under refrigeration were found to be distinctly superior in all respects.     

Editor's Page

Abstract

The various steps of mine planning and control in open pits are described in connection with the appropriate mathematical models. Modern hardware for control and communication 18 summarily described. The gains which are to be realized by the various degrees of truck dispatching are discussed as well as the potential for future developments.     

Fair queueing with service envelopes (FQSE): a cousin-fair hierarchical scheduler for subscriber access networks

In this paper, we propose and investigate the characteristics of a fair queueing with service envelopes (FQSE) algorithm-a hierarchical fair-share scheduling algorithm for access networks based on a remote scheduling system such as Ethernet passive optical networks (EPON) or cable TV network. FQSE is designed to overcome the limiting factors of a typical remote scheduling system such as large control-plane delay, limited control-plane bandwidth, and significant queue switch-over overhead. The algorithm is based on a concept of service envelope-a function representing the fair allocation of resources based on a global network condition called satisfiability parameter (SP). We define properties of cousin-fairness and sibling-fairness and show the FQSE to be cousin-fair. FQSE is unique in that it is the only hierarchical algorithm that is simultaneously cousin-fair. Furthermore, we show the necessary techniques to adapt FQSE to variable-sized packet-based networks. We analyze FQSE performance in EPON serving 1024 independent queues and demonstrate FQSE's ability to provide guaranteed bandwidth to each queue and to share the excess bandwidth fairly.     

Protecting multicast sessions in WDM optical mesh networks

Recent advances in wavelength-division-multiplexing (WDM) technology are expected to facilitate bandwidth-intensive multicast applications. However, a single fiber (bundle) cut on such a network can disrupt the transmission of information to several destination nodes on a "light tree"-based multicast session. Thus, it is imperative to protect multicast sessions e.g., by reserving resources along backup trees. We show that, if a backup tree is directed-link-disjoint to its primary counterpart, then data loss can be prevented in the event of any single link failure. We provide mathematical formulations for efficient routing and wavelength assignment (RWA) of several multicast sessions (including their backup trees for dedicated protection) at a globally optimum cost. We present these formulations for networks equipped with two kinds of multicast-capable switch architectures: one using the opaque (O-E-O) approach and the other using transparent (all-optical) approach. We expand our formulations to accommodate sparse splitting constraints in a network, in which an optical splitter has limited splitting fanout and each node has a limited number of such splitters. We develop a profit-maximizing model that would enable a network operator to be judicious in selecting sessions and simultaneously routing the chosen ones optimally. We illustrate the solutions obtained from solving these optimization problem formulations for a representative-size network.     

Reliability of large periphery GaN-on-Si HFETs

GaN devices exhibit excellent potential for use in many RF applications. However, commercial acceptance of the technology has been hindered by the scarcity and non-statistical nature of reliability results. In this work we present a full device level reliability study of GaN-on-Si HFETs. Reliability results on this technology include three-temperature DC data that show an activation energy of 1.7 eV and an average failure time >10⁷ h at 150 °C. Additionally, long duration DC lifetest (30 000 device hours) and RF lifetest (4000 device hours) results demonstrate a repeatable low drift process. Environmental tests such as autoclave and ESD demonstrate the ruggedness of the material system and technology. Finally, initial failure analysis is discussed.     

Characterization and Studies on Hydro Dynamically Stable Operation of an Angular Jet SOG for COIL

Chemical oxygen-iodine Laser (COIL) is one of the fast emerging high power laser source for near Infrared (λ=1.315μm) laser generation. The heart of the system is the singlet oxygen generator (SOG) which is a pumping source for this laser. A Jet type SOG with a novel approach was designed and fabricated. Singlet oxygen was taken out of the SOG at an angle of 40° thus avoiding the carry over of droplets, which is one of the major drawbacks of horizontal system. The preliminary results have been reported in our earlier publication. The present paper discusses the performance of this generator for various operational conditions viz. diluent's gas nitrogen / helium, basic hydrogen peroxide composition, generator pressure and gas velocity. Further, conditions for the stable operation from generator as well as chlorine injection point of view have been identified.