On the mechanics of large inelastic deformations: noncoaxiality,axial effects in torsion and localization

Summary The macroscopic behavior of materials subjected to large deformations is investigated by considering the structure and mechanics of the single slip. Physically based constitutive relations for the plastic flow and material spin are then rigorously derived by resorting to the concept of non-coaxiality; yielding a class of vertex-type plasticity models incorporating features like noncoaxiality and large material rotation. It is shown that these phenomena are inherently coupled through the concept of plastic spin as it relates to the persistence of noncoaxiality. The implication of such phenomena to large deformations is investigated by examining their influence on the development of axial effects accompanying finite shear deformation, as well as on the onset of localized shear bands.     

Integrated Smart Sensor Calibration

In many applications electronic sensors are used toimprove performance and reliability of measurement systems. Suchsensors should provide a correct transfer from the physical signalto be measured to the electrical output signal. One importantstep to achieve this, is to calibrate each sensor by applyingdifferent reference input signals and adjusting the sensor transferaccordingly. Besides expensive reference equipment the calibrationprocess takes much time and attention per individual sensor,which means a considerable increase in sensor production costs.By including at the sensor or sensor interface chip a programmablecalibration facility the calibration of such smart sensors caneasily be automated and can be executed for a batch of sensorsat a time, thus minimizing the calibration time and costs. Thispaper presents a calibration method and options for integrationin the smart sensor concept, in hardware as well as in software.An advantage of the proposed method is that it does not needa large matrix of calibration data, which needs to be storedin a look-up table or converted into a correction formula, butinstead it uses a step-by-step approach to correct the sensortransfer at each calibration measurement until the error is sufficientlysmall.     

JETS,PLUMES AND BUOYANT JETS IN STATIC ENVIRONMENT

Turbulence represents an essential aspect in atmospheric and oceanic circulations.In particu-lar,it is a preponderant factor in the dispersion of pollutants of artificial or natural origin.Thevertical turbulent jets,plumes and buoyant jets discharging into static environment is one of themost important and basic flow patterns related with the environment pollution.These flows havenumerous important applications,for example,thrust augmentors,waste disposal plumes fromstacks and combustion systems,and significant problems of turbulent diffusion.     

Einsatzmöglichkeiten neuronaler Netze in der Industrierobotik

Zusammenfassung Es werden die prinzipiellen Einsatzm?glichkeiten neuronaler Netwwerke zur Modellbildung, Steuerung und Regelung von Robotern sowie zur Unterstützung sensomotorischer Aktionen dargelegt. Einige ausgew?hlte neuronale Regelungskonzepte werden vorgestellt und auf ihre Stabilit?t, Robustheit, Genauigkeit sowie Echtzeitf?higkeit hin untersucht. Ferner wird gezeigt, wie sich neuronale Regelungskonzepte in industrielle Robotersteuerungen integrieren lassen.     

Berechnung der Wirbelstromdichten und-kräfte in der Umgebung großer supraleitender Spulen für den magnetischen Einschluß bei der Kernfusion

Übersicht Um die Betriebssicherheit großer supraleitender Magnetsysteme für die Kernfusionsforschung zu gewährleisten, muß die im Magnetsystem gespeicherte Energie schnell entladen werden können. Durch die veränderlichen großvolumigen Magnetfelder werden in benachbarten leitfähigen Strukturen durch Induktion hohe Wirbelströme hervorgerufen. Durch sie treten dort elektromagnetische Kräfte. auf, die einzelne Komponenten mechanisch überlasten können. Zur Berechnung dieser Kräfte wurde eine einfache numerischanalytische Methode entwickelt, die im folgenden vorgestellt und mit Finite-Elemente-Verfahren verglichen wird.

---

Calculation of eddy current densities and forces around large superconducting coils for nuclear fusion

Contents The reliable operation of the superconducting magnet systems used for the magnetic confinement in nuclear fusion research requires the ability of a fast discharge of the stored magnetic energy. The corresponding magnetic field variation gives rise to high eddy currents by inductive coupling with surrounding conductive components. The eddy current forces can lead to a mechanical overload of some of these components. A simple numerical-analytical method was developed in order to calculate these forces. This method is presented and compared with the Finite Element Method.

     

Wave propagation by the passage of two high-speed trains in a tunnel

A numerical simulation of unsteady compressible flow induced by two high-speed trains in oncoming traffic within a tunnel is presented. The computations were carried out by means of a second-order accurate Harten-Yee type upwind TVD scheme. In order to take the effect of friction into account, a source term is included in the governing flow equations. In the computation, moving boundary configurations were used to simulate the two trains passing through the tunnel. As geometrical configuration, the Einmalberg tunnel, where experimental data are available, was selected. The computational results agree reasonably well with their experimental counter-part. The waves interaction and the waves propagation process at the tunnel entrance and exit as well as within the tunnel are addressed. Finally, the influence on the transmitted waves at the tunnel exit portal and the variation of the negative pressure drop during the passage of the two trains are discussed.     

Process development and adhesion behavior of electroless copper on liquid crystal polymer (LCP) for electronic packaging application

Liquid crystal polymer (LCP) has potentially a very wide application as substrate material in electronic packaging applications because of its unique advantages. The work in this paper was performed to realize the metallization of LCP for the purpose of board fabrication, and to study the adhesion between deposited copper and LCP. A homogenous electroless plated copper layer on LCP with 4 to 5 /spl mu/m thickness was achieved, while it increased up to 40 /spl mu/m with the subsequent electroplating. The timescale of etching, deposit ion rate, and pH value were gradually changing during the plating process and the influences on copper layer quality were investigated. The adhesion force of the copper-LCP layer system was measured by a shear-off-method. Scanning electron microscopy (SEM) was used to check the surface morphology after etching and the interface after shearing on both the backside of the copper layer and the LCP side. The relationship between the shear-off adhesion of copper and the time of chemical etching before plating was examined, and the optimal etching time is discussed. Heat treatment after plating was used, and it was shown that this significantly improved the adhesion strength.     

Hilfsmittel zum Auffinden einer ersten Gestalt beim methodischen Konstruieren: Gestaltbeeinflussung durch die Verwendung physikalischer Effekte

Zusammenfassung Ziel des Teilvorhabens, über das hier berichtet wird, was es, für eine Auswahl von physikalischen Effekten eine Zuordnung von gestaltbeeinflussenden Merkmalen auf sehr abstrakter Ebene zu erreichen und damit eine n?here Charakterisierung der Wirkfl?chen und Wirkr?ume zu erreichen die zur Umsetzung eines physikalischen Effektes notwendig sind. Die hieraus resultierenden Ergebnisse sind dem Abschlu?bericht zu entnehmen [1]. Weiterführende Themen, die basierend auf den vorliegenden Erkenntnissen bearbeitet werden, haben zum Ziel, die wesentlichen und entscheidenden Parameter einer Konstruktionsaufgabe zu erkennen und zukünftig zielgerichtet L?sungsvarianten zu erstellen, um somit für eine Neukonstruktion sinnvolle L?sungsfelder sehr frühzeitig abzugrenzen.     

Thermal post buckling behavior of rectangular antisymmetric cross-ply composite plates

Summary The thermal post buckling behavior of simply-supported, antisymmetric cross-ply plates with immovable edges is investigated in this paper. For this purpose, a one term approximation for the inplane and transverse displacements is assumed and Rayleigh-Ritz method is used to obtain the equations of equilibrium. The question, whether the true thermal buckling (bifurcation buckling under thermal loads) exists for such plates is also addressed to. The conditions under which the thermal buckling in the classical sense occurs are derived. It is shown that nonlinear bending stiffness for such plates is direction dependent, because of an extra quadratic nonlinear term in addition to the usual cubic nonlinear term in the governing equilibrium equation. Results are presented for various plate configurations.