Adrenocorticotropin and cortisol hyperresponsiveness to hexarelin in patients with Cushing's disease bearing a pituitary microadenoma, but not in those with macroadenoma

We previously reported that in Cushing's disease (CD) the ACTH- and cortisol (F)-releasing activity of Hexarelin (HEX), a GH secretagogue, is exaggerated with respect to that in normal subjects and is higher than that of human CRH (hCRH), but it is absent in Cushing's syndrome. Our aim was to extend the study about the effects of HEX (2.0 microg/kg, iv) on ACTH and F secretion in 21 patients with CD (3 men and 18 women, 16-68 yr old). Based on magnetic resonance imaging, 15 CD patients had pituitary microadenoma, and 6 had macroadenoma. The results in CD patients were compared with those in 27 normal age-matched controls (NS; 10 men and 17 women, 24-69 yr old). Basal ACTH and F levels in CD were similar in patients with microadenom (mean+/-SEM, 78.3+/-7.2 pg/mL and 237.1+/-23.6 microg/L, respectively) and macroadenoma (57.4+/-9.0 pg/mL and 196.9+/-20.1 microg/L, respectively) and were higher (P < 0.001) than those in NS (17.7+/-2.0 pg/mL and 115.3+/-6.7 microg/L, respectively). In microadenoma CD patients, HEX induced marked ACTH and F increases (delta peak, mean+/-SEM: 261.2+/-77.6 pg/mL and 226.1+/-87.2 microg/L, respectively), which were higher (P < 0.04) than those induced by hCRH (45.6+/-16.9 pg/mL and 84.6+/-25.7 microg/L, respectively). Moreover, in microadenoma CD patients, the ACTH and F responses to HEX were higher (P < 0.001) than those in NS (18.5+/-4.0 pg/mL and 36.1+/-6.8 microg/L, respectively). In macroadenoma CD patients, HEX induced a slight, but significant increase (P < 0.02) in ACTH and F levels (33.9+/-18.0 pg/mL and 89.6+/-34.3 microg/L, respectively), which was not significantly different from that elicited by hCRH (20.0+/-7.0 pg/mL and 54.8+/-21.3 microg/L, respectively). In macroadenoma CD patients, the ACTH and F responses to HEX and hCRH were, in turn, similar to those in NS. In conclusion, our findings demonstrate that the ACTH and F hyperresponsiveness to HEX is present in Cushing's disease with micro-, but not macro- ACTH-secreting pituitary adenoma. This finding agrees with other evidence pointing toward differences in the hormonal behavior between micro- and ACTH-secreting pituitary macroadenomas.     

Component-relevancy and characterization results in multistatesystems

Two new versions of component relevancy for multistate structure functions are introduced. They are compared with some existing component-relevance conditions and their general properties are investigated. Based on the two relevance conditions, two component-importance measures for multistate systems are defined; they are most appropriate for comparing components when a certain type of system improvement is considered. Series and parallel structures are characterized within the L-superadditive and L-subadditive structure functions by imposing the two new relevance conditions     

Monitoring systems and determination of actual fatigue usage

At GKN, fatigue monitoring of important components has been conducted since 1979. The monitoring methods depend on the mechanisms of damage; quasi-static loads are regarded as well as dynamic loads. The components were selected for monitoring on the basis of a system analysis. The data resulting from monitoring are used to optimise operation mode steadily. Experience shows that the use of monitoring data as input for fatigue assessment is the most realistic and cost-effective way. This fatigue assessment uses global and local sensitivity studies to evaluate the load-stress relation for each component. These relations can be programmed to produce stress vs. time curves. These are processed according to ASME rules to give a realistic fatigue usage.     

Behavior of a vibrating wire near the liquid3He-vacuum interface and in a saturated3He-4He mixture

In this paper we describe the effect of the vicinity of a liquid³He-vacuum interface on the behavior of a vibrating wire viscometer. It was found that in the fluid near the liquid interface the quality factor is lower than in the bulk liquid. We further report on the observation of a doubling of the resonance peak of the wire in a saturated³He-⁴He mixture. The frequencies and amplitudes of the two peaks strongly depend on the distance between the phase boundary and the vibrating wire; the temperature and the velocity of the phase boundary have no significant influence on the peak frequencies. The observed peak doubling is attributed to the coupling of the vibrating wire with a standing second-sound wave in the dilute phase where the volume of the dilute phase can be regarded as a resonating cavity for second sound.     

Grenzen der Anwendbarkeit der Theorie der analytischen Signale

Zusammenfassung Bei der praktischen Anwendung der analytischen Signale ist es erforderlich, die Ermittlung der Hilbert-Transformation numerisch durchzuführen. Dazu wurden u.a. Verfahren von H.W. Schü?ler, R. Unbehauen und G. Wunsch vorgeschlagen. In der Arbeit werden allgemeine Ergebnisse zur numerischen Umsetzung der Hilbert-Transformation dargestellt. Es wird gezeigt, da? alle praktisch realisierbaren Verfahren für bestimmte Signale divergieren. Damit ist es m?glich, die in der Experimentalphysik schon l?nger bekannten Schwierigkeiten bei der Umsetzung der Hilbert-Transformation zu erkl?ren.     

Investigations of delamination criticality and the transferability of growth criteria

This article describes a study of delamination growth along 0 °/0 °, 0 °/ 5 °, ± 5 °, and 0 °/90 ° interfaces sandwiched between unidirectional carbon fibre/epoxy composite material. Relationships between damage criticality, growth rate and acoustic emission activity for delamination growth have been studied and the transferability of results from laboratory coupons to composite structural elements has been examined. Two types of coupon tests, conventional delamination beams and rigidly loaded single edge notched strips, have been compared for different mode ratios. Comparative tests have been made on buckling-induced delamination in plates. A graphite crack gauge has been used to measure delamination length and growth rate, ranging from 0.05–2000 m/s. Damage growth was also followed using visual, ultrasonic C-scan, X-ray radiography, macro-video and acoustic emission measurements. Empirical evaluations of interlaminar toughness for delamination beams are made using the Irwin-Kies relation. Unstable growth is analysed using elasto-dynamic moving finite elements. Bucklinginduced delamination is analysed using plate/shell FE methods with growth/remeshing algorithms.     

A mechanism for transgranular stress-corrosion cracking

A model is proposed to explain transgranular-stress corrosion cracking (T-SCC) in face-centered cubic (fcc) materials. Crack propagation is shown to be anisotropic, in that growth near {110} < 001> is discontinuous due to crack arrest by dislocation blunting whereas growth away from this growth orientation is continuous. For the former case, renucleation of arrested cracks involves active dissolution of shear bands at the crack tip, which changes the stress state at Lomer-Cottrell locks, causing them to fail by cleavage. Once the crack is nucleated, its instantaneous macroscopic crack-growth velocity is considered to be comprised of multiple nucleation of microcracks with intervening arrests. This microcracking results from the interaction of the stress fields from neighboring cracks which are forming simultaneously, the crack-opening constraint due to ligaments which act as “bridges” behind the crack front, and the localized dissolution at the microcrack tip which affectsK _IC and leads to the “cobblestone” appearance. Experimental evidence and theoretical considerations are presented to support the model. The system studied was Cu-25 at. pct Au in 0.6 M NaCl solution at potentials between 300 and 400 mV (sce), which precludes hydrogen embrittlement. This article is based on a presentation made in the symposium “Quasi-Brittle Fracture” presented during the TMS fall meeting, Cincinnati, OH, October 21–24, 1991, under the auspices of the TMS Mechanical Metallurgy Committee and the ASM/MSD Flow and Fracture Committee.