Investigation of the flow in the impeller-side space of rotary pumps with superimposed throughflow for the determination of axial force and frictional torque

Summary The subject of the present theoretical and experimental work is laminar flow processes in the gap between a rotating disc and a stationary wall. A report is given of the creation of suitable computational methods for determining the pressure gradient and velocity field in the impeller-side space of specifically slow-working rotary pumps in the process of conveying very viscous media with Newton properties, given temperature-dependent viscosity. The exposition is based on the abstract model conception of parallel radial gaps, the resultant frictional torques and the axial forces being determined for the case of a superimposed throughflow. On the one hand, the basis of the computations is an implicit difference method, and on the other an asymptotic computational method which leads to success via disturbance estimates in conjunction with similarity transformations, and approaches the difference method in accuracy while being relatively simple to handle and requiring little expenditure of time. On the basis of the computational results, experiments are conducted using a suitable experimental set-up, which answer the question concerning the efficiency and area of validity of the computational model.Notation c _p specific heat capacity - f _ax axial force - m moment of rotation - p pressure - q throughflow parameter - r radius - r, ,z coordinates - s gap width - u, v, w velocities - volume flow - angular velocity - viscosity - thermal conductivity - density - material parameter - a external - i internal - w wall With 7 Figures     

The incorporation of yield surface distortion into a unified constitutive model,part 2: Predictive capabilities

Summary The MATMOD-4V-DISTORTION model has been derived [1] with the intent of improving the MATMOD-4V model by adding the capability to predict distortions of small strain offset yield surfaces. This model is compared against a variety of experimental data to verify its behavior. Model simulations are compared with experimental data for proportional and nonproportional prestress histories and the effect of yield definition is also investigated. Finally, the same model which predicts a flattening of the yield surface in space is used to predict a rotation of the yield surface in ₁-₂ coordinates.With 9 Figures     

Thermal gradient effects on the vibration of prestressed rectangular plates

Summary The effect of a thermal gradient on the transverse vibration of a prestressed rectangular plate is investigated by the method of matched asymptotic expansions. This class of heated plate is characterised by changing its Young's modulus with temperature. Analytical results for the eigenvalues are presented for fully-clamped and fully-hinged rectangular plates when the bending rigidity is small compared to the in-plane loading. To leading order in (where ² denotes the normalized bending rigidity), the eigenvalues of an ideal membrane are obtained, independent of thermal effects.Thermal gradient effects occur in the first order correction of eigenvalues for a clamped plate while the eigenvalues of a hinged plate are affected by thermal gradient only to second order. In particular, Schneider's results are recovered when thermal gradient effects are absent.Nomenclature W' bending deflection - D(x) flexural rigidity - D ₀ reference flexural rigidity - x',y' rectangular co-ordinate - E modulus of elasticity - E ₁ reference modulus of elasticity - t' time - h' height of plate - a' length of plate - b' width of plate - T temperature - T ₀ reference temperature - slope of variation ofE withT - parameter - L characteristic length - N ₀ characteristic in-plane force - m mass per unit area - characteristic frequency - outer solution - inner solution - small parameter     

Stromdichte- und Magnetfeldverteilung bei einer Anordnung aus Platten und vielen parallelen Stromleitern

Übersicht Die vorliegende Arbeit befaßt sich mit der gesamten Stromdichte- und Magnetfeldverteilung in vielen flachen leitenden Platten konstanter Permeabilität, die bei einer Anordnung aus diesen Platten und vielen parallelen stromführenden Leitern angeordnet in mehreren Lagen entsteht. Unter Anwendung der Maxwellschen Differentialgleichungen und durch Einführung des Vektorpotentials werden allgemeine Gleichungen für die Komponenten der magnetischen Induktion im zweidimensionalen Feldraum aufgestellt. Die Stromdichteverteilung in den leitenden Platten, in denen Wirbelströme entstehen, wird aus dem Vektorpotential hergeleitet. Zunächst werden die Platten unendlich lang angenommen und die entsprechenden Gleichungen in Integralform aufgestellt, für deren Lösung die Gauss-Laguerresche Methode angewandt wird. Dann werden die Platten beiderseits durch Eisenwände begrenzt, womit die Gleichungen unter Berücksichtigung der Randbedingungen in Summenform ausgedrückt werden.

---

Distribution of current and magnetic field density in flat conductive plates in an array composed from plates and many parallel conductors

Contents In the present research work the overall distribution of current and magnetic field density in many flat plates of constant magnetic permeability has been investigated, which applies to an array composed from the flat plates and many parallel conductors installed in many layers. Use of Maxwell's differential equations and vector potential results in general equations for the components of magnetic density in two dimensional field space. The distribution of current density in the conductive plates, where eddy currents are taken into account, is obtained from the vector potential. Initially the flat plates are considered being of infinite length, and with appropriate arrangement of the boundary conditions, the model applies to flat plates limited to both sides by iron partitions. Examples are given for both cases, where for the plates of infinite length the Gauss-Laguerre method is applied.

---

Liste der Symbole A Vektorpotential - B Magnetische Induktion - I ₁ Stromstärke eines Leiters - N ₁ Anzahl der parallelen Leiter - N ₂ Anzahl der parallelen Platten - Permeabilität des Plattenmaterials - _r Relative Permeabilitätskonstante des Plattenmaterials - Leitfähigkeit - b Breite des Hauptstreukanals - i Stromdichte der Platten samt Wirbelströme - h ₁ Höhe der Leiter - a ₁ Breite der Leiterlagen - a Plattendicke - s Breite des Nebenstreukanals - c Abstand der letzten Platte von der Eisenwand - g Plattenhöhe - x, z, , Dimensionen - Q, K Integrationskonstanten - k ganze Zahl     

Thermocapillary instability of an infinite Prandtl number fluid with negligible gravitational effects

Summary Finite amplitude fluid motion is investigated in a horizontal layer of an infinite Prandtl number fluid with an upper free surface for the case where thermocapillary effects are significant and gravitational effects are negligible. It is found that subcritical instability exists and that two-dimensional rolls and down-hexagons (where motion is downward at the cells' centers) are always unstable. But up-hexagons (where motion is upward at the cells' centers) are stable for sufficiently small amplitude , while both uphexagons and squares are stable in a range of larger where hysteresis effects exist.With 1 Figure     

A combinatorial study of the rigidity of planar structures

Summary A combinatorial method is presented for examining the rigidity of planar structures. In this approach, an expansion process is used for the formation of a statically determinate substructure, known as a -tree of a structure. The algorithm of Lováz and Yemini, and the method of Sugihara are employed for the recognition of the elementary subgraphs, during this process.With 4 Figures     

Acoustic waves in solids with random cavities,II: Energy density considerations

Summary The propagation of acoustic plane and line-polarized waves in an isotropic solid containing random cavities is studied theoretically and experimentally. The effect of the cavities on the energy density and macroscopic propagation parameters of the acoustic waves is considered and the relationships between the cavities volume concentration, their average dynamic shape factor and the dynamic overall stiffness moduli of the solid are derived in the long wave approximation.     

From Natural Methylation to Versatile Alkylations Using Halide Methyltransferases

Halide methyltransferases (HMTs) enable the enzymatic synthesis of S-adenosyl-l -methionine (SAM) from S-adenosyl-l -homocysteine (SAH) and methyl iodide. Characterisation of a range of naturally occurring HMTs and subsequent protein engineering led to HMT variants capable of synthesising ethyl, propyl, and allyl analogues of SAM. Notably, HMTs do not depend on chemical synthesis of methionine analogues, as required by methionine adenosyltransferases (MATs). However, at the moment MATs have a much broader substrate scope than the HMTs. Herein we provide an overview of the discovery and engineering of promiscuous HMTs and how these strategies will pave the way towards a toolbox of HMT variants for versatile chemo- and regioselective biocatalytic alkylations.     

Einfluß der Produkteigenschaften auf die Trocknung

Influence of Product Properties on Drying. A number of items of information are required for selection and design of a drying process. Thermodynamic equilibrium as well as heat and mass transfer are the traditional prerequisites for describing the drying operation. In the development of a drying process further specific properties of the product must be known. These properties, such as chemical reactions or sticking properties, greatly reduce the number of possible drying processes. For this reason, the measurement of these properties plays an important role in the development of a drying process. Many of the bench scale tests in use do not have a physical basis, but have been developed empirically because the physical context is often unknown. Yet a number of physically well-defined methods are available for product characterization. In practical work a combination of empirical and scientifically defined methods is used.