在Fe-Al-C系统中合成优质Ⅱa型宝石级金刚石单晶

和优质Ib型宝石级金刚石单晶生长相比，作为当今高温高压晶体生长的一种高精尖技术，优质1／a型宝石级金刚石单晶对合成技术提出了更高更苛刻的要求：枢研究从晶体的生长速度出发，发现一开始阶段（大约几个小时）的晶体生长速度对优质宝石级金刚石单晶的后期生长争关重要。埘Fe-Al-C系统（Al含量不大于2．5wt％）来说，采用多品种法将晶体开始阶段的晶体生长速度由1．5mg／h降至0．5mg／h后，对生长过程中金属包裹体的进入有了明显的抑制作用，晶体的质量有了很大提高。从晶体中包裹体的存任形式来看，为了获得优质Ⅱa型宝石级金刚石单晶，在触媒中人为地添加除氮剂给晶体生长过程中的排杂过程带来了很大的难度：为了更好的实现排杂，必须很好的处理晶体表面的径向平铺生长速度和晶体轴向的堆积生长速度之间的火系。     

LD7铝合金时效工艺的研究

通过试验系统地研究了ＬＤ７铝合金的单级和两级时效工艺。结果表明，与传统的单级时效相比，两级时效在不降低室温强度，硬度的前提下，可显著提高合金的电导率及高温性能。     

扩链剂在PVC树脂生产中的应用

讨论了常见扩链剂的功能及在聚氯乙烯树脂生产中的应用。     

高强度高压绝缘子产品质量同其结构性能的重要关系(续)——制造者和用户应共同掌握的规则和指标(第二部分)

6　各种电瓷结构分析实例证实结构的差别下面介绍各种电瓷结构分析的结果。从扫描电镜照片 (ＲＥＭ)的判读中可见到这些材料的差别。试样ａ:日本瓷绝缘子Ｃ1 1 0 /1 1 2 ,制造年代 1 997试样ｂ :西门子瓷绝缘子Ｃ1 2 0 ,Ｃ1 3 0 ,制造年代 2 0 0 1试样ｃ:高强度矾土瓷绝缘子 ,西门子 2 0 0 1开发陶瓷岩相试样的制备系经多级金刚石研磨和抛光以及化学浸蚀。为判定气孔状态 ,对磨片作了透光照片 ,在其光亮区放大倍数为 1 0 0∶1 ,而且扫描电镜照片放大倍数为2 0 0∶1。图 5ａ　试样ａ光片的ＬＭ(透光显微镜 )和ＲＥＭ(扫描电镜 )图象 ,放大倍…     

Morphologies and microstructures of tree-like carbon produced at different reaction conditions in a CVD process

Centimeter-size multi-branched tree-like carbon structures have been generated by the catalytic chemical vapor deposition of toluene using ferrocene as the catalyst precursor and investigated by means of SEM, TEM, and EDX. It is found that a temperature of 1000-1200 °C and a carrier gas flow rate of 1000-2500 ml/min are necessary for the generation of the carbon trees. Their morphologies and microstructures change greatly with the changing reaction conditions. The fractal dimensions of the trees are calculated to quantitatively investigate the influence of different reaction temperatures on the morphologies.     

Electrochemical micromachining of nitinol by confined-etchant-layer technique

The confined etchant layer technique has been applied to fabricate complex three-dimensional microstructures on nitinol for the first time. HF and HNO₃ were locally and simultaneously electrogenerated at the mold surface to etch a nitinol workpiece. NaOH was used as an efficient scavenger to confine the etchant close to the mold. Cyclic voltammetry was employed to study the electrochemical behavior of a Pt electrode in the etching solution in order to choose an appropriate potential for etchant generation on the mold. The thickness of the confined etchant layer was estimated to be several micrometers by inspecting the deviation of the sizes of the etched spots from the sizes of those on the microelectrode. Thus, the composition of the electrolyte could be optimized for better etching precision. By optimizing the composition of the electrolyte, complex microstructures on a Pt-Ir mold bearing the logo “XMU” of Xiamen University were successfully fabricated on nitinol. The etched patterns were approximately negative copies of the mold, and the precision of duplication could easily reach the micrometer scale.     

To accelerate shot boundary detection by reducing detection region and scope

Video Shot Boundary Detection (SBD) is the fundamental process towards video summarization and retrieval. A fast and efficient SBD algorithm is necessary for real-time video processing applications. Extensive work has focused on accurate shot boundary detection at the expense of demanding computational costs. In this paper, we propose a fast SBD approach that reduces the computation pixel-wise and frame-wise while still giving satisfactory accuracy. The proposed approach substantially speeds up the computation through reducing both detection region and scope. Color histogram and mutual information are used together to measure the difference between frames. Corner distribution of frames is utilized to exclude most of false boundaries. We conduct extensive experiments to evaluate the proposed approach, and the results show that our approach can not only speed up SBD, but also detect shot boundaries with high accuracy in both Cut (CUT) and Gradual Transition (GT) boundaries.     

Morphologies-Controlled Synthesis and Optical Properties of Bismuth Tungstate Nanocrystals by a Low-Temperature Molten Salt Method

Well-crystallized bismuth tungstate (Bi₂WO₆) powders with different morphologies were successfully synthesized via a low-temperature molten salt method. The powders were characterized by X-ray diffraction, transmission electron microscopy, and UV-Vis, respectively. It was found that the variation of morphology of the obtained Bi₂WO₆ powder mainly depends on the different reaction temperatures and the weight ratio of LiNO₃–NaNO₃ salt to precursor. In addition, the UV-Visible absorption spectra showed that the synthesized powders had strong light absorption properties not only in the ultraviolet light but also in the visible light region.