Korrosion von ölgefeuerten Zentralheizungskesseln

Corrosion of oil-fired domestic boilers Depending on the surface temperature of the flue gas side the corrosion of oil fired domestic boilers proceeds either mainly by acid corrosion or by oxygen corrosion:

• – At surface temperatures of 60°C and higher the corrosion mechanism of acid corrosion prevails and the corrosion rates amount to 0.1–0.3 mm/year (values referred to continuous burner operation). The corrosion products consist of soluble iron(II)- and iron(III)sulfates. Higher corrosion rates can be attributed to an appreciable catalytic formation of sulfur trioxide on the corrosion products formed on the convective heating surfaces.
• – At surface temperatures of 40°C the mechanism of oxygen corrosion already dominates and the corrosion rates are about ten times higher (1.5–3 mm/year, referred to continous burner operation). The high portion of ioron oxide hydrates, especially goethit (α-FeOOH), makes the corrosion products difficult to remove.
• – Distinctly reduced service lives are also expected for the so called reduced temperature boilers (“Niedertemperaturkessel”) and low temperature boiers (“Tieftemperaturkessel”): According to the manufacturers these boilers may be operated at boiler water temperatures well below 60°C, as they are equipped with constructive measures to enhance the surface temperature on the flue gas side. However, these measures are only fully effective under stationary conditions.

Some of the results were obtained from weight loss measurements on test specimen made from St 35.8 and gray cast iron, that were exposed to the flue gases of an oil fired experimental boiler. Other important results come from field measurements of the sulfuric acid content of about 30 boilers that are in practical use.     

A prototype scanning stylus profilometer for rapid measurement of small surface areas

A novel stylus based profiling instrument has been developed for rapid measurement of small surface areas. Outlined in the following paper are some of the key features of the prototype system including the wideband stylus pick-up and the dedicated scanning traverse mechanism. In addition, some preliminary results obtained by scanning the instrument over several different surfaces are presented.     

Automatisches Sicherheitstesten

Moderne Testgeneratoren finden Schwachstellen in Eingabeschnittstellen von Programmen, indem sie in Sekunden tausende Eingaben zufällig erzeugen. Die Werkzeuge lassen sich leicht von jedermann einsetzen–zum Angriff oder zur Verteidigung.     

On finite dynamic equations for fluid-saturated porous media

Summary The paper concerns the relations between two principally different approaches to the formulation of momentum balance equations in porous media theories, namely, the dynamic approach similar to Biot's theory and the modern approach as a result of mixture theories extended by the concept of volume fractions. In particular, it is shown that both approaches necessarily lead to the same type of momentum balance equations and furthermore contain, in a certain sense, within the geometrically linear case, the well-known classical equations of Biot's theory.     

Electromagnetic field diffusion, θ-functions,and image solutions

Contents We discuss some initial and boundary value problems of one-dimensional electromagnetic field diffusion. The solutions can be given by infinite series in two essentially different (however equivalent) forms, one being the usual Fourier-expansion and the other one being an infinite series of Gaussian exponentials or related functions (as for instance error-functions). The second form can be obtained by using infinitely many images to fulfill initial and boundary conditions. Finally the mathematical relations between the two equivalent types of solutions are discussed in terms of -functions and their transformation properties. The existence of the solutions in these two different forms is very interesting from a numerical point of view also.

---

Die Diffusion elektromagnetischer Felder, -Funktionen und Spiegelungsmethoden

Übersicht Es werden einige Anfangs- und Randwertprobleme eindimensionaler elektromagnetischer Felddiffusion erörtert. Die Lösungen können in zwei wesentlich verschiedenen (jedoch gleichwertigen) Formen angegeben werden, erstens in Form üblicher Fourier-Reihen und zweitens in Form unendlicher Reihen von Gaußschen Exponentialfunktionen oder damit verwandter Funktionen (z.B. Fehlerfunktionen). Diese zweite Form der Lösungen läßt sich durch die Anwendung unendlich oft wiederholter Spiegelung zur Erfüllung der Rand- und Anfangsbedingung anschaulich interpretieren. Abschließend werden die beiden Lösungstypen mit Hilfe von -Funktionen und deren Transformationseigenschaften erläutert. Die Verfügbarkeit der Lösungen in beiden Formen ist auch numerisch sehr interessant.

     

An Automated Brain Image Analysis System for Brain Cancer using Shearlets

In this paper, an Automated Brain Image Analysis (ABIA) system that classifies the Magnetic Resonance Imaging (MRI) of human brain is presented. The classification of MRI images into normal or low grade or high grade plays a vital role for the early diagnosis. The Non-Subsampled Shearlet Transform (NSST) that captures more visual information than conventional wavelet transforms is employed for feature extraction. As the feature space of NSST is very high, a statistical t-test is applied to select the dominant directional sub-bands at each level of NSST decomposition based on sub-band energies. A combination of features that includes Gray Level Co-occurrence Matrix (GLCM) based features, Histograms of Positive Shearlet Coefficients (HPSC), and Histograms of Negative Shearlet Coefficients (HNSC) are estimated. The combined feature set is utilized in the classification phase where a hybrid approach is designed with three classifiers; k-Nearest Neighbor (kNN), Naive Bayes (NB) and Support Vector Machine (SVM) classifiers. The output of individual trained classifiers for a testing input is hybridized to take a final decision. The quantitative results of ABIA system on Repository of Molecular Brain Neoplasia Data (REMBRANDT) database show the overall improved performance in comparison with a single classifier model with accuracy of 99% for normal/abnormal classification and 98% for low and high risk classification.     

Large deformation measurement by holographic interferometry

Summary The use of holographic interferometry for the measurement of large deformations is described. From the nature of holographic interferometry it is evident that large deformations exceed the wave length of the light source used by at least ten times of this size. To obtain holographically identifiable values of large deformations, a method of successive partial lighting is used. It shows how it is possible to keep all the advantages of the holographic method and use it even under conditions which apparently exceed its possibilities of application.     

Facets of the Fully Mixed Nash Equilibrium Conjecture

In this work, we continue the study of the many facets of the Fully Mixed Nash Equilibrium Conjecture, henceforth abbreviated as the FMNE\mathsf{FMNE} Conjecture, in selfish routing for the special case of n identical users over two (identical) parallel links. We introduce a new measure of Social Cost, defined as the expectation of the square of the maximum congestion on a link; we call it Quadratic Maximum Social Cost. A Nash equilibrium is a stable state where no user can improve her (expected) latency by switching her mixed strategy; a worst-case Nash equilibrium is one that maximizes Quadratic Maximum Social Cost. In the fully mixed Nash equilibrium, all mixed strategies achieve full support.     

Tracking control for boundary controlled parabolic PDEs with varying parameters: Combining backstepping and differential flatness

The combination of backstepping-based state-feedback control and flatness-based trajectory planning and feedforward control is considered for the design of an exponentially stabilizing tracking controller for a linear diffusion-convection-reaction system with spatially and temporally varying parameters and nonlinear boundary input. For this, in a first step the backstepping transformation is utilized to determine a state-feedback controller, which transforms the original distributed-parameter system into an appropriately chosen exponentially stable distributed-parameter target system of a significantly simpler structure. In a second step, the flatness property of the target system is exploited in order to determine the feedforward controller, which allows us to realize the tracking of suitably prescribed trajectories for the system output. This results in a systematic procedure for the design of an exponentially stabilizing tracking controller for the considered general linear diffusion-convection-reaction system with varying parameters, whose applicability and tracking performance is evaluated in simulation studies.