Self-Organized Monitoring in Ad-Hoc Networks

We propose in this paper a self-organized monitoring architecture for mobile ad-hoc networks based on a selective scheme where subsets of nodes are managed. These nodes are determined based on their network behavior in order to favor subsets of well-connected nodes. The key idea is to relax the requirements of the management plane, and to use these manageable subsets to monitor the performance of the overall network. We therefore propose a new performance metric to be monitored, in order to estimate the capability of ad-hoc nodes to communicate end-to-end in the network. Extensive simulations show how different parameters affect this metric.     

Surge arresters for insulation coordination in UHV power systems—related problems and solutions

Surge arresters play an important role in the insulation coordination of ultra high-voltage (UHV) electric power systems. In this contribution the requirements on the surge arresters are discussed in comparison with those in conventional applications, and how surge arrester standards are being changed to cover these special requirements.     

System integration of high voltage electrostatic MEMS actuators

A system integration for High Voltage (HV) electrostatic MicroElectroMechanical Systems (MEMS) actuators is introduced on a micro-Printed Circuit Board. The system includes a programmable microcontroller, a programmable DC/DC converter, a multi output HV interface and electrostatic MEMS actuators. The system produces high output voltages (10–300 V) and can control a large variety of MEMS capacitive loads (1 to 50 pF) by combining diverse semiconductor technologies. This system proves that technologies, such as low voltage CMOS of different processes, high voltage DMOS and MEMS, can interact, communicate and even be integrated as a System In Package (SIP), providing significant size and cost reductions. The system was programmed to control electrostatic MEMS actuator. The DC/DC converter was made from components of different technologies and two addressable high voltage CMOS interfaces were fabricated with DALSA's 0.8 μm High Voltage process. A prototype of the global system has been built and tested.     

Modellierungs- und Simulationsverfahren für die optische Verbindungstechnik auf elektrischen Leiterplatten

Optical interconnection technology on the printed circuit board level is a key technology for future microelectronic equipment. The consideration of functional, technological, and economical requirements results in a hybrid solution, where electrical and optical interconnects are integrated into one substrate called electrical optical printed circuit board. The significant part of the entire design process for electrical optical printed circuit boards is marked by the design supporting modelling and simulation of optical interconnects. Based on an abstract model for an entire optical interconnect a simulation model for optical multimode-waveguides is presented, taking into account all significant waveguide properties. Apart from that, the modeling of active components (laser- and photo-diodes) is addressed.     

AlGaN/GaN HEMTs on SiC for high power broadband applications up to 40 GHz

An overview of properties and recent achievements for AlGaN/GaN high electron mobility transistors (HEMT) on semi-insulating SiC substrate is given towards high power and broadband applications up to a frequency of 40 GHz. Starting from epitaxial growth and process technology we present state-of-the-art power results obtained at the Fraunhofer Institute (IAF) from AlGaN/GaN HEMTs on SiC. Further, a one-stage 16 GHz MMIC power amplifier circuit with 1.6 W output power is presented. This result represents the first AlGaN/GaN MMIC on SiC fabricated in Europe.     

Berechnung der Anlaufdaten von Asynchron-Käfigläufermotoren verschiedener Stabformen mit der Methode der finiten Differenzen

Übersicht Die spannungsabhängigen Anlaufströme und Drehmomente eines 2800 kW Asynchron-Käfigläufermotors werden mit der Methode der finiten Differenzen und einem neuen Block-SOR-Iterationsverfahren berechnet. Es wird ber die Ergebnisse für Rechteck-, Trapez- und andere Rotorstabformen berichtet. Die numerisch berechneten Daten werden mit den nach konventionellen Regeln ermittelten Zahlen verglichen. Der Sättigungseffekt ist unerwartet groß, als Folge des großen Nennstrombelages. Die ungesättigten werte stimmen sehr gut überein.

---

On the calculation of the starting data of A.C. squirrel-cage motors with different bar shapes by the method of finite differences

Contents The voltage dependent starting currents and torques of a 2,800 kW 3-phase a.c. squirrel cage motor are calculated by the method of finite differences using a new block-SOR iteration technique. The paper describes the results for different rotor bars with rectangular, trapezoidal and other shapes. The calculated data are compared with conventionally determined figures. The saturation effect is rather large due to the high values of the rated current loading per air gap periphery. The unsaturated values agree very good.

     

FGTO — A fine structured GTO-thyristor with improved switching characteristics

Contents A fine structured GTO thyristor, abbreviated FGTO, has been developed to improve the switching characteristics. The new device has a cathode finger width of only 20 m and can be turned off without a negative gate bias at an anode current level of more than 200 A/cm². The turn-off time can be shortened down tot _off 500 ns by increasing the negative gate current. A snubber circuit is not necessary to turn off the FGTO's. The maximum rate of rise of anode voltage du/dl reaches more than 10 kV/s. Analytical models are developed to describe the turn-off transients of the FGTO's. Good agreement between the theoretical and experimental results could be achieved.

---

FGTO — Ein feinstrukturierter GTO-Thyristor mit verbessertem Schaltverhalten

Übersicht Zur Verbesserung des Schaltverhaltens ist ein feinstrukturierter GTO-Thyristor, abgekürzt FGTO, entwickelt worden. Dieses neue Bauelement hat eine Kathoden-streifenbreite von nur 20 m und kann ohne negative Gatevorspannung bei einer Anodenstromdichte von mehr als 200 A/cm² abgeschaltet werden. Die Abschaltzeit läßt sich durch Erhöhung des negativen Gatestroms bis zut _off 500 ns verkürzen. Beim Abschalten von FGTOs ist keine RC-Beschaltung erforderlich. Der maximale du/dl-Wert erreicht mehr als 10 kV/s. Zur Beschreibung des Abschalt-verhaltens von FGTOs werden analytische Modelle entwickelt, die eine gute Übereinstimmung mit den Meßergebnissen liefern.

     

Algorithmen zur Pulsweitenmodulation für Wechselrichter mit in Echtzeit berechnetem Pulsmuster

Übersicht Mit Hinblick auf die zunehmend Verbreitung findende Pulsmusterberechnung in Echtzeit werden in dem Aufsatz Gesichtspunkte diskutiert, die sich aus den Eigenschaften des leistungselektronischen Stellgliedes, des Pulswechselrichters, ergeben. Die bei Abtastregelungen für die Dauer einer Abtastperiode konstante Stellgröße muß bei ihm durch Pulsweitenmodulation in ein Pulsmuster mit konstanter Amplitude und Pulsen variabler Breite umgesetzt werden. Durch ein neues Verfahren mit versetzter Abtastung haben dabei Rechentotzeiten bis zur Dauer einer halben Abtastperiode keinen Einfluß mehr auf das Pulsmuster.

---

Algorithms for pulswidth modulation of inverters with online calculated pulse patterns

Contents Online calculation of pulse patterns will be employed more intensively in the future. Aspects concerning the powereleotronic circuit, the pulsewidth-modulated inverter, are to be discussed. The set value being constant for the duration of a sampling interval, has to be converted by a modulation algorithm into a pulse pattern with constant amplitude and pulses of variable width. Calculation dead-times up to half of sampling interval have no influence on the pulse pattern when using a new algorthm with shifted sampling instants.

---

---

Herrn Prof. Dr.-Ing. Klemens Heumann zum 60. Geburtstag gewidmet     

Finite difference time-domain analysis of planar microwave circuits

Contents The application of finite difference time domain analysis techniques to planar microwave integrated circuit design is discussed. It is shown that using this technique, three-dimensional discontinuity problems in planar microstrip and coplanar circuits can be analyzed in a full-wave approach.

---

Finite-Differenzen-Analyse von planaren Mikrowellen-schaltungen im Zeitbereich

Übersicht Es wird die Anwendung der Finiten-Differenzen-Analyse elektromagnetischer Felder im Zeitbereich auf den Entwurf integrierter Mikrowellenschaltungen diskutiert. Es wird gezeigt, daß durch Anwendung dieser Technik eine Lösung der Beschreibungsprobleme für dreidimensionale Schaltkreis-Diskontinuitäten in planarer Mikrostreifenleitungstechnik und in koplanarer Leitungstechnik unter Berücksichtigung der vollen Welleneigenschaften gefunden werden kann. Verschiedene Beispiele von Analysen planarer Mikrowellenbauelemente werden diskutiert und die Ergebnisse mit Messungen verglichen.

---

---

Dedicated to Prof. Dr.-Ing. Herbert Döring on the occasion of his 80th birthday     

Einflüsse von Triazolapplikationen auf Kornertrag und -qualität von Winterraps

Effects of Growth Substance Applications (Triazole) on Yield Formation and Grain Quality of Winter Rape Field trials have been conducted for two years (1986/87 and 1987/88) with cv. Lirabon (low erucic acid and low glucosinolate content). At several growth stages uptil beginning of flowering and at different rates the triazole RSW 0411 (Bayer) was applied. The problem was to investigate growth regulator effects on agronomically important traits, the utilization of yield potential and on seed quality. Applications during stem elongation reduced plant height phoma lingam infestation and lodging. Branching and numbers of pods/plant increased, partly on costs of pod filling. In 1986/87 grain yields/ha indicated (not significant) increases without any effects on grain quality. In 1987/88 grain yield/ha decreased significantly combined with increasing protein- and glucosinolate contents.