Glomerular and tubular function in glycogen storage disease

Urinary protein and calcium excretion were assessed in 77 patients with the hepatic glycogen storage diseases (GSD): 30 with GSD-I (median age 12.4 years, range 3.2-32.9 years), 25 with GSD-III (median age 10.5 years, range 4.2-31.3 years) and 22 with GSD-IX (median age 11.8 years, range 1.2-35.4 years). Inulin (Cinulin) and para-aminohippuric acid (CPAH) clearances were also measured in 33 of these patients. Those with GSD-I had significantly greater albumin (F = 15.07, P < 0.001), retinol-binding protein (RBP) (F = 14.66, P < 0.001), N-acetyl-beta-D-glucosaminidase (NAG) (F = 9.41, P < 0.001) and calcium (F = 7.41, P = 0.001) excretion than those with GSD-III and GSD-IX. GSD-I patients (n = 18) also had significantly higher Cinulin (F = 5.57, P = 0.009), but CPAH did not differ (F = 0.77, NS). Renal function was normal in GSD-III and GSD-IX patients. In GSD-I, Cinulin (r = -0.51, P = 0.03) and NAG excretion (r = -0.40, P = 0.03) were inversely correlated with age, whereas albumin excretion was positively correlated with age (r = +0.41, P = 0.03). RBP and calcium excretion were generally high throughout all age groups. Hyperfiltration in GSD-I is associated with renal tubular proteinuria that occurs before the onset of significant albuminuria. Deficiency of glucose-6-phosphatase within the proximal renal tubule may primarily cause tubular dysfunction, glomerular hyperfiltration being a secondary phenomenon.     

Crystallization and agglomeration kinetics of nickel ammonium sulphate in an MSMPR crystallizer

Precipitation of nickel ammonium sulphate achieved by mixing solutions of nickel sulphate and ammonium sulphate in a 5 1 MSMPR crystallizer is used to investigate both crystallization and agglomeration kinetics from the steady-state crystal size distribution. An iterative non-linear parameter estimation procedure is used to deduce the kinetic rate parameters in the solution of the agglomeration model suggested by Liao and Hulburt from the data-set obtained by size analysis of the product crystals. The results obtained are correlated in terms of conventional power law kinetic expressions.     

Geometry-Dependent R-Curve for Quasi-Brittle Materials

Fracture of quasi-brittle materials such as ceramics and cement-based materials can be described by an R -curve, defined as fracture resistance. The R -curve can be constructed as the envelope of the strain energy release rates ( G ). In this study, R -curve is defined as an envelope of G -curves obtained by varying the dimensions of identical specimens, while keeping the geometry and the initial flaw size constant. By approximating the G -curve with a second-order function of the crack length, a simple formulation of the R -curve is derived by solving a differential equation. Three parameters are needed for the proposed R -curve. These parameters can be obtained by testing a notched-beam specimen and using linear elastic fracture mechanics. The proposed R -curve simulates well the geometry dependency as well as other characteristics of the fracture response of quasi-brittle materials.     

Proposal for st-Routing Protocol

A routing protocol chooses one of the several paths (routes) from a source node to a destination node in the computer network, to send a packet of information. In this paper, we propose a new routing protocol, which we call st-routing protocol, based on st-numbering of a graph. The protocol fits well in noisy environments where robustness of routing using alternative paths is a major issue. The proposed routing protocol provides a systematic way to retry alternative paths without generating any duplicate packets. The protocol works for only those networks that can be represented by biconnected graphs.     

Effect of Calcium Lactate, 4-Hexyl Resorcinol and Vacuum Packing on Physico-chemical, Sensory and Microbiological Qualities of Minimally Processed Litchi (Litchi chinensis Sonn.)

Litchi (Litchi chinensis Sonn.) fruits are very susceptible to pericarp browning which adversely affects consumer acceptability even though the aril portion remains in excellent condition. Litchi arils (litchis) were treated with a solution containing 0–2% (w/v) calcium lactate (CL), 0–0.02% (w/v) 4‐hexyl resorcinol (4‐HR) and 1% potassium sorbate. The pH of solution was adjusted to 4.0 with citric acid. Treated litchis were packed in polystyrene trays, over‐wrapped with polypropylene film, vacuum‐packed (0, 47409.3, 94831.9 Pa) and stored at 4 ± 2 °C. Drip losses, pH, total soluble solids (TSS), sensory attributes and microbiological quality of stored samples were estimated. A four‐factor, three‐level experimental design (D₆ Hokes design) with 19 experiments was chosen. Mathematical models were developed to analyse and predict the effect of CL, 4‐HR, in‐package vacuum and storage time on the responses. TSS, pH and sensory scores decreased significantly (P 0.01), whereas drip losses and microbial count increased significantly (P 0.01) with time. Drip loss was significantly (P 0.1) reduced by addition of CL. 4‐HR prevented browning and changes in colour score during storage were significantly less. Vacuum in packages exerted significant (P 0.01) effect over pH, TSS, sensory and microbiological qualities of minimally processed litchis.     

State of Practice for Positive Moment Connections in Prestressed Concrete Girders Made Continuous

Precast bridges are often constructed as single span for dead load, but continuous for live load. A diaphragm connection is provided for negative moment continuity. However, the connection may also be subjected to positive moments due to time-dependent effects. Because these moments may be large enough to damage the diaphragm or even the girders, a positive moment connection is often provided. This paper reports on a study to determine the types of positive moment connections used across the country and to identify potential problems with these types of connections. A questionnaire survey was conducted to assess the state of practice for precast prestressed concrete bridges made continuous. The survey provides valuable information on this type of bridge and updates a previous survey on this subject.     

Plastic deformation of forearm

The unusual occurrence of plastic deformation in an adult is described.     

Alternative Granulation Technique: Melt Granulation

A melt granulation process has been investigated (1, 2) which efficiently agglomerates pharmaceutical powders for use in both immediate- and sustained-release solid dosage forms. The process utilizes materials that are effective as granulating fluids when they are in the molten state. Cooling of the agglomerated powders and the resultant solidification of the molten materials completes the granulation process. Both the molten agglomeration and cooling solidification were accomplished in a high shear Collette Gral mixer equipped with a jacketed bowl. Hence, the melt granulation process replaces the conventional granulation and drying operations which use water or alcohol solutions. The melt granulation process has been investigated using immediate- and sustained-release TAVIST® (clemastine fumarate USP) tablet formulations. The TAVIST granulations have been characterized by power consumption monitoring, measurement of the granulation particle size distribution, bulk and tapped density determinations, and loss-on-drying measurements. Scale-up of the melt granulation process for the sustained release TAVIST tablet formulation was judged successful based on a comparison of the hardness, friability, weight uniformity during compression, disintegration time, and dissolution rate data obtained at different manufacturing scales.     

Throughput and Delay in Random Wireless Networks With Restricted Mobility

Grossglauser and Tse (2001) introduced a mobile random network model where each node moves independently on a unit disk according to a stationary uniform distribution and showed that a throughput of Theta(1) is achievable. El Gamal, Mammen, Prabhakar, and Shah (2004) showed that the delay associated with this throughput scales as Theta(nlogn), when each node moves according to an independent random walk. In a later work, Diggavi, Grossglauser, and Tse (2002) considered a random network on a sphere with a restricted mobility model, where each node moves along a randomly chosen great circle on the unit sphere. They showed that even with this one-dimensional restriction on mobility, constant throughput scaling is achievable. Thus, this particular mobility restriction does not affect the throughput scaling. This raises the question whether this mobility restriction affects the delay scaling. This correspondence studies the delay scaling at Theta(1) throughput for a random network with restricted mobility. First, a variant of the scheme presented by Diggavi, Grossglauser, and Tse (2002) is presented and it is shown to achieve Theta(1) throughput using different (and perhaps simpler) techniques. The exact order of delay scaling for this scheme is determined, somewhat surprisingly, to be of Theta(nlogn), which is the same as that without the mobility restriction. Thus, this particular mobility restriction does not affect either the maximal throughput scaling or the corresponding delay scaling of the network. This happens because under this 1-D restriction, each node is in the proximity of every other node in essentially the same manner as without this restriction