POLARIZATION BEHAVIOR OF PACKED-BED ELECTRODES: A COMPARATIVE STUDY OF EXPERIMENTAL AND MODELING RESULTS

The current distribution and overall polarization behavior of electrodeposition at a flow-through (packed bed or fluidized bed) electrode are modeled by means of a one-dimensional model involving a primary reacting species and a simultaneous side reaction. The model equations are solved by orthogonal collocation; the time and storage requirements compare favorably to those of finite-difference methods. Experimental data obtained using a packed-bed electrode are compared with the model predictions and various methods of fitting the data are compared.     

Risk factors associated with recidivism among extrafamilial child molesters.

This study examined the predictive efficacy of 10 rationally derived, archivally coded variables for assessing reoffense risk among extrafamilial child molesters. Follow-up data on 111 child molesters who were discharged from the Massachusetts Treatment Center between 1960 and 1984 were used. Degree of sexual preoccupation with children, paraphilias, and number of prior sexual offenses predicted sexual recidivism. Juvenile and adult antisocial behavior, paraphilias, and low amount of contact with children predicted nonsexual victim-involved and violent recidivism. Area under the receiver-operating characteristic curves in all three analyses indicated discrimination that was substantially better than chance, ranging from .73 to .79. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

"Does reward increase or decrease creativity?": Correction to Eisenberger and Selbst.

Reports an error in "Does reward increase or decrease creativity" by Robert Eisenberger and Michael Selbst (Journal of Personality and Social Psychology, 1994[Jun], Vol 66[6], 1116-1127). In the aforementioned article, Figures 1 and 2 were interchanged. The figures appear with their correct captions in the erratum. (The following abstract of the original article appeared in record 1994-40652-001.) Two studies involving 504 school children investigated why behaviorists and cognitively oriented investigators have come to opposite conclusions about reward's effects on creativity. A monetary reward for a high degree of divergent thought in 1 task (word construction) increased children's subsequent originality in a different task (picture drawing). The same reward, made contingent on a low degree of divergent thought, reduced this generalized originality. These effects were eliminated by using a large reward and were restored by keeping the large reward out of the children's sight. The results suggest that reward training increases generalized creativity when (1) a high degree of divergent thought is required and (2) the reward is presented in not too salient a fashion. The findings are consistent with a 2-factor interpretation of rewarded creativity effects that incorporates learned industriousness and selective attention. [A correction concerning this article appears in Journal of Personality & Social Psychology, 1994(Jul), Vol 67(1), 125. Figures 1 and 2 were interchanged.] (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Similarity, interactive activation, and mapping.

The question of "What makes things seem similar?" is important both for the pivotal role of similarity in theories of cognition and for an intrinsic interest in how people make comparisons. Similarity frequently involves more than listing the features of the things to be compared and comparing the lists for overlap. Often, the parts of one thing must be aligned or placed in correspondence with the parts of the other. The quantitative model with the best overall fit to human data assumes an interactive activation process whereby correspondences between the parts of compared things mutually and concurrently influence each other. An essential aspect of this model is that matching and mismatching features influence similarity more if they belong to parts that are placed in correspondence. In turn, parts are placed in correspondence if they have many features in common and if they are consistent with other developing correspondences. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Numerical methods for colorimetric calculations: Sampling density requirements

This article quantifies errors arising from various integration methods and from sampling density in the numerical estimation of colorimetric integrals, e.g., tristimulus values. Both data sampling density and various numerical integration method errors will be distinguished. A test is presented to quantify sampling interval requirements for accurate colorimetric calculations for various illuminants. © 1992 John Wiley & Sons, Inc.     

Oxidation of Silicon Carbide in Environments Containing Potassium Salt Vapor

At high temperatures in clean oxidizing environments, SiC forms a very protective SiO₂ film, but, in environments containing low levels of gaseous alkali salt contaminants or where condensed salts may deposit on the surface, the resistance of the film is significantly reduced. Oxidation kinetics of SiC were measured by continuous thermogravimetric analysis in a controlled environment containing CO₂, H₂O, and O₂ plus low levels of potassium-containing salts. Potassium was found to be incorporated into the SiO₂ scale and to significantly change its transport properties and its morphology. The rate of scale formation was found to increase directly in proportion to K in the scale. A change in mechanism was observed when water vapor was added to the reacting gas stream.     

Nickel and chromium cycles: Stocks and flows project part IV

Nickel and chromium are essential ingredients in alloys increasingly important for energy-efficient, environmentally friendly modern technology. Quantitative assessment of the flows of these metals through the world economy from resource extraction to final disposal informs resource policy, energy planning, environmental science, and waste management. This article summarizes the worldwide technological cycles of nickel and chromium in 2000. Stainless steel is the major use of these metals, but they serve numerous other special needs, as in superalloys for high-temperature service, as plating materials, and in coinage. Because they are used primarily in alloys, novel recycling issues arise as their use becomes more widespread. “... the great New York and St. Louis double track, nickel plated railroad...” — Norwalk, Ohio, Chronicle 10 March 1881 announces arrival of surveyors for the future Nickel Plate Railway “Later [1911] I formed an alloy of Iron and Chromium, which showed remarkable resistance to rust and tarnish ... [It was] rediscovered by an Englishman named Brearley, in 1914.” —Elwood Haynes to Stephen F. Roberts, 17 January 1925     

NIST 0:45 reflectometer

The NIST 0:45 reflectometer measures the spectral reflectance factor at an influx angle of 0° and an efflux angle of 45° of colored, nonfluorescent specimens at room temperature, with widths ranging from 3 to 10 cm and heights from 3 to 20 cm and with an uncertainty of less than 0.5 in color difference units. Published in 2008 by John Wiley & Sons, Inc. Col Res Appl, 33, 94–99, 2008     

Yodel: A Yield Stress Model for Suspensions

A model for the yield stress of particulate suspensions is presented that incorporates microstructural parameters taking into account volume fraction of solids, particle size, particle size distribution, maximum packing, percolation threshold, and interparticle forces. The model relates the interparticle forces between particles of dissimilar size and the statistical distribution of particle pairs expected for measured or log-normal size distributions. The model is tested on published data of sub-micron ceramic suspensions and represents the measured data very well, over a wide range of volume fractions of solids. The model shows the variation of the yield stress of particulate suspensions to be inversely proportional to the particle diameter. Not all the parameters in the model could be directly evaluated; thus, two were used as adjustable variables: the maximum packing fraction and the minimum interparticle separation distance. The values for these two adjustable variables provided by the model are in good agreement with separate determinations of these parameters. This indicates that the model and the approximations used in its derivation capture the main parameters that influence the yield stress of particulate suspensions and should help us to better predict changes in the rheological properties of complex suspensions. The model predicts the variation of the yield stress of particulate suspensions to be inversely proportional to the particle diameter, but the experimental results do not show a clear dependence on diameter. This result is consistent with previous evaluations, which have shown significant variations in this dependence, and the reasons behind the yield stress dependence on particle size are discussed in the context of the radius of curvature of particles at contact.