Superposition of the notched strength of composite laminates

An improved macroscopic model for predicting the strength of a composite laminate containing a circular notch is developed. Two constants are introduced which uniquely determine the notch sensitivity of a given material. A superposition method for the notched strength of composite laminates is developed which allows data for arbitrary materials and laminate configurations to be superimposed upon a single master curve. The influence of material orthotropy upon notched strength is discussed. A relative notch sensitivity parameter is introduced which allows quantification of the notch sensitivity of a given composite material system, stacking sequence, or laminate configuration.     

Preparation and characterization of a number of amine salts of long-chain fatty acids

Summary Eighty-eight amine salts of long-chain fatty acids have been prepared, purified by solvent crystallization, and characterized. Forty-five of these were salts of palmitic acid. The rest included salts of capric, lauric, myristic, stearic, oleic, elaidic, and 12-hydroxystearic acids. A variety of aliphatic, aromatic, and heterocyclic amines, including primary, secondary, and tertiary amines, were investigated. The majority of these gave 1∶1 acid-amine compounds on solvent recrystallization of an equimolar mixture of acid and amine. Some of the amines gave no crystallizable salt, and with others the pure salt could not be obtained by this procedure. Under the same conditions the symmetrical alkyl, substituted alkyl, and aralkyl secondary amines investigated gave crystallizable compounds containg two molecules of fatty acid to one of amine. Molecular compounds of 2-aminopyridine with four molecules of saturated fatty acid were formed by recrystallization starting with a 1 to 4 amine-acid mixture. Surface-tension measurements were made for aqueous solutions of a few of the amine salts. One of the laboratories of the Southern Utilization Research and Development Division, Agricultural Research Service, U. S. Department of Agriculture.     

Fatty acid morpholides as plasticizers for vinyl chloride resins. III. Ternary compatibility-composition diagrams for the oleic-linoleic-stearic and oleic-linoleic-palmitic systems

A systematic investigation has been made of the effect of fatty acid composition on the compatibility of the corresponding mixed morpholides as plasticizers for vinyl chloride-vinyl acetate copolymer resins. Plasticizer evaluation data were obtained for the morpholides of lauric, palmitic, elaidic, and epoxyoleic acids and compared with the literature values for other fatty acid morpholides and morpholide mixtures. Ternary compatibility-composition diagrams have been constructured for the oleic-linoleic-stearic and the oleic-linoleic-palmitic morpholide systems. These diagrams make it possible to predict what adjustment, if any, must be made in the composition of any mixture of these fatty acids so that the corresponding morpholide mixture will be compatible. The diagrams will be useful in selecting the most appropriate and economical fatty acid sources from which to make compatible morpholide mixtures. Presented at the 52nd Annual Meeting, American Oil Chemists’ Society, St. Louis, Mo., May 1–3, 1961. One of the laboratories of the Southern Utilization Research and Development Division, Agricultural Research Service, U.S. Department of Agriculture.     

A generalized method for correcting instrument spreading in gel permeation chromatography

A general method of chromatogram correction for skewed instrument spreading in gel permeation chromatography is presented. The correction method is so general that there is no restriction on the shape of the spreading function. It admits nonsymmetric, non-Gaussian as well as nonconvolution type. Aspects of solution techniques are discussed and an illustrative example is given to elucidate the method.     

Carbon fiber structure and stability studies

A study has been made of the thermal-oxidative stability of several commercially available carbon fibers. Significant differences in the weight loss behavior were observed in air aging studies run on the bare fibers at 600°F (589 K). The stability of high temperature laminates, such as those based on NR-150 polyimide precursor solutions, was found to be directly affected by the stability of the reinforcing carbon fibers. In studies carried out to determine the reasons for carbon fiber instability, residual sodium sulfate was found to be the principle destabilizing factor. A mechanism whereby the sodium sulfate promotes the oxidation of carbon in the presence of air is proposed.     

Impact reinforcement of poly(vinyl chloride)

Several theories have been advanced to explain the toughening of glassy plastics by rubbery modifiers. These have been based primarily on studies of high impact polystyrene or ABS systems, where the crazing mechanism has been shown to be most applicable. In the present study, the effects of MBS (methacrylate-butadiene-styrene) impact modifiers on PVC have been studied, utilizing both physical and microscopic techniques. Tensile test results indicate that a primary contribution of the modifier to increased toughness is a lowering of the yield stress of the PVC. Electron microscopic studies and density determinations on strained samples indicate no crazes in these MBS-modified PVC systems. These results suggest that the mechanism of impact reinforcement in PVC is based on the enhancement of localized yielding in the vicinity of the rubbery modifier particles.     

Apparatus and procedure for measuring release rates from formulations of lepidopteran semiochemicals

An apparatus was developed wherein a vacuum source was used to pull air across a controlled-release-formulation dispenser or a planchet containing a known quantity of a semiochemical and into a collector filled with a polymeric adsorbent. After a set time, the semiochemical was eluted with solvent and was quantified by gas-liquid chromatography (GLC). High percentages of known quantities of the lepidopteran semiochemicals (Z)-7-dodecen-l -ol acetate (Z7DDA), boiling point (bp) 275 ° C/1 atm, (Z)-9-tetradecen-1-ol formate (Z9TDF), bp 289 °C/1 atm, and (Z,Z)-3,13-octadecadien-1-ol acetate (ZZODDA), bp 490 °C/1 atm, were recovered. The semiochemicals did not oxidize and were recovered quantitatively from the adsorbent. The release rates of Z9TDF from a controlled-release dispenser were found to be directly proportional to the airflow rates. Release rate measurements on the Z9TDF dispensers were made for the purpose of estimating the method's precision. The method was shown to give internally consistent results by measurements on another Z9TDF formulation. The accuracy of the method is discussed.Mention of a commercial or proprietary product in this paper does not constitute an endorsement by the USDA.     

Necrodols: Anti-insectan terpenes from defensive secretion of carrion beetle (Necrodes surinamensis)

Two compounds recently isolated from the defensive gland ofNecrodes surinamensis, -and -necrodol, first representatives of a new category of monoterpenes (the necrodanes), are shown to be repellent to ants and other insects and irritating to cockroaches and flies. The compounds doubtless play a defensive role inNecrodes. The possible long-range applied significance of research on insect repellents is discussed.Paper No. 80 of the seriesDefense Mechanisms of Arthropods. Paper No. 79 is T. Eisner et al., Experientia 42:204–207 (1986).     

Strain-Induced Deformation in Magnesia–Alumina Layered Composites

Ceramic beams are induced in situ to form complex shapes at elevated temperature without the application of an external stress. This process has been demonstrated for thin alumina substrates coated with a layer of magnesia. The internal strain causing the substrates to deform at elevated temperature arises as a consequence of strain mismatch accompanying the penetration of the coating into the substrate. The magnitude of the deformation depends on the amount of coating applied, on the thickness of the substrate, on the density of the substrate, and on the temperature. During exposure of the beams to elevated temperature, the magnesia coating reacts with the alumina substrate to form the spinel phase; the resulting volume change accompanying the phase transformation is likely the predominant driving force for deformation.