水溶液辐射分解产物对金属材料腐蚀的影响

实验研究了水辐射分解作用对高放废物深地质处置容器材料的影响。在高放废物深地质处置库附近的地下水,受辐射线作用后分解出氧、氢和氧化产物(例如H_2O_2等),于是在高放废物容器周围形成一个氧化场,导致高放废物中的某些重要放射性核素(例如U,Np和Tc)易溶于水,并向远域迁移。本实验中的含FeSO_4(0.13 mol/L)水溶液在吸收剂量为0、20、60、180、500kGy的射线作用下,其氧化还原电位(Eh)值由+357mV增至+414 mV;在不同吸收剂量的射线作用下,金属Cu、金属Al、0.357 mv金属Fe和不锈钢(后者是我国拟采用的高放废物包装容器材料),在水溶液中的氧化侵蚀强度,分别比在无辐射情况下的大0.2-6.1倍。     

Conference key distribution schemes for secure digital mobilecommunications

We propose a new service for digital mobile communication systems. The service enables two or more users to hold a secure conference. Two requirements must be considered: privacy and authentication. Privacy involves ensuring that an eavesdropper cannot intercept the conversations of the parties holding the conference. Authentication involves ensuring that service is not obtained fraudulently in order to avoid usage charges. We present two new conference key distribution schemes for digital mobile communication systems. In these schemes, a group of users can generate a common secret keg over a public channel so that they may hold a secure conference     

生物降解塑料开发现状与发展趋势

本文简要介绍国内外生物降解塑料的现状与发展趋势。     

A newly robust controller design for the position control ofpermanent-magnet synchronous motor

A robust controller which is designed by employing variable-structure control and linear-quadratic method is presented for a permanent-magnet synchronous motor (PMSM) position control system. It is to achieve accurate control performance in the presence of plant parameter variation and load disturbance. In addition, it possesses the design flexibility of the conventional state feedback control. It is applied to the position control of a PMSM. Simulation and experimental results show that the proposed approach gives a better position response and is robust to parameter variations and load disturbance     

COIL中BHP浓度对发生O_2(~1△)的影响

本文实验研究了BHP的浓度对产生O2（1△）的影响。实验结果表明：当BHP浓度大于3.5M时，Cl2利用率以及O2（1△）的产率将不依赖于BHP浓度的变化而变化，同时，实验结果表明，使用低浓度的BHP对COIL的操作是可行的。     

Optical dot gain on newsprint determined with the Lund nuclear microprobe

A technique for measuring optical dot gain, i.e. the relative difference between the actual screen dot and the optically perceived one, is presented. By combining measurements from the non-optical nuclear microprobe with data from image analyzing technique the optical dot gain can be determined. The procedure to reach pixel by pixel correlation on a micrometer scale is discussed. In the newsprint sample studied in this investigation a typical optical dot gain between 15 and 20% was deduced. The variation in the optical dot gain was correlated with other characteristic parameters of the print and newsprint and especially a positive correlation to the mass density of the newsprint was observed.     

铝液夹杂物检测DMIRT－Ⅲ法的试验研究

提出了一种新的铝液夹杂物快速检测方法。导出了该法的检测原理方程。分析并试验研究了影响检测重复性和分辨率的因素。试验选择了较好的检测参数，并获得了较好的检测结果。     

MAGNESIUM HYDROXIDE FILLED EVA: THE EFFECTS OF FILLER SURFACE MODIFICATION ON THE STRENGTH OF FILLER/MATRIX ADHESION AND THE CONSEQUENCES FOR COMPOSITE STRUCTURE AND PROPERTIES

The interaction of ammonium stearate (AS) and γ-aminopropyltriethoxysilane (APS) treatments with a magnesium hydroxide flame retardant filler and their effects on its use in an ethylene vinyl acetate copolymer compound have been investigated. The work has shown clear evidence of changes in the structure of the surface layers formed on the filler as the amount of additive is increased and the levels at which these occur can be correlated with theoretical monolayer quantities. Infrared (IR) spectroscopy data suggest that the stearate coating changes from a half salt to a full salt as the coating level is increased and that the APS coating on the filler initially has a significant bicarbonate content, presumably due to reaction with atmospheric carbon dioxide. The effect of coating level on the melt flow rate, insoluble matrix content, crystallisation behaviour, tensile properties, limiting oxygen index, and ageing of the filled compound has been studied. Distinct trends have been observed, many of which can be correlated with the structure of the filler surface layers. Of particular importance is the observation that, unlike APS, excess stearate appears to promote detrimental ageing effects.     

Reply to comments on “Error rate performance of theprojection code”

The authors reply to the comments by Koppelaar and Tolhuizen (see ibid. vol.46, no.9, p.573, 1998). They state that the optimum choice of the slopes used to perform the encoding process in a projection code always results in maximizing the minimum Hamming distance so that d=2 ^r