微粉对矾土基超低水泥浇注料性能的影响

以高铝矾土熟料为主原料 ,加入 2 %的铝酸钙水泥及总量为 6 %的Al2 O3 微粉和SiO2 微粉 ,配制了矾土基超低水泥浇注料 ,研究了微粉对浇注料的烧结性能、力学性能及热震稳定性的影响。结果表明 :(1 )SiO2 微粉对浇注料的促烧结作用优于Al2 O3 微粉。这是因为与Al2 O3 微粉相比 ,由气相沉积生成的SiO2微粉的粒度小 ,比表面积大 ,活性较高。 (2 )随着SiO2微粉加入量的增加 ,在 1 1 0 0℃和 1 4 0 0℃处理后的常温强度以及在 1 30 0℃和 1 4 0 0℃下的高温抗折强度和抗热震性明显提高。这是由于引入的SiO2 微粉在高温下与Al2 O3 反应生成的针状莫来石穿插进入刚玉骨架 ,起着明显的强化和韧化作用     

用RAP法引上技术生长KCL晶体

用RAP法(reactivo atmosphere process)处理KCl熔体,在不改变生长气氛和RAP继续处理的情况下,提拉生长KCl晶体,以解决高纯、大尺寸、生长速度快、成品率高和有较大经济效益的问题。     

Medium-Term Hydro Generation Scheduling (MTHGS) with Chance Constrained Model (CCM) and Dynamic Control Model (DCM)

Medium-Term Hydro Generation Scheduling (MTHGS) plays an important role in the operation of hydropower systems. In the first place, this paper presents a Chance Constrained Model for solving the optimal MTHGS problem. The model recognizes the impact of inflow uncertainty and the constraints involving hydrologic parameters subjected to uncertainty are described as probabilistic statements. It aims at providing a more practical technique compared to the traditional deterministic approaches used for MTHGS. The stochastic inflow is expressed as a simple discrete-time Markov chain and Stochastic Dynamic Programming is adopted to solve the model. Then in order to use the information of long-term inflow forecast to improve dispatching decisions, a Dynamic Control Model is developed. Short-term forecast results of the current period and long-term forecast results of the remaining period are treated as inputs of the model. Finally, the two methods are applied to MTHGS of Xiluodu hydro plant in China. The results are compared to those obtained from Deterministic Dynamic Programming with hindsight and advantages and disadvantages of the two methods are analyzed.     

基于ANSYS混凝土重力坝流固耦合动力特性分析

以某混凝土重力坝非溢流坝段动力特性为背景,探讨流固耦合效应对结构自振特性的影响,运用大型有限元软件对结构自振特性进行分析计算,得出了流体对结构自振特性影响以及结构的固有频率,避免在运行过程中发生共振,造成对结构的破坏。     

Multidimensional ARKN methods for general oscillatory second-order initial value problems

Based on B-series theory, the order conditions of the multidimensional ARKN methods are presented for the general multi-frequency and multidimensional oscillatory second-order initial value problems by Wu et al. (2009). These multidimensional ARKN methods exactly integrate the multi-frequency and multidimensional unperturbed oscillators. In this paper, we pay attention to the analysis of the concrete multidimensional ARKN methods for the general multi-frequency oscillatory second-order initial value problems whose right-hand side functions depend on both  y$y$and  y^′$y^{\prime }$ (the class of physical problems which fall within its scope is broader). Numerical experiments are carried out to show that the new multidimensional ARKN methods are more efficient compared with some well-known methods for dealing with the oscillatory problems in the scientific literature.     

A novel microneedle array for the treatment of hydrocephalus

We present a microfabricated 10 by 10 array of microneedles for the treatment of a neurological disease called communicating hydrocephalus. Together with the previously reported microvalve array, the current implantable microneedle array completes the microfabricated arachnoid granulations (MAGs) that mimic the function of normal arachnoid granulations. The microneedle array was designed to enable the fixation of the MAGs through dura mater membrane in the brain and thus provide a conduit for the flow of cerebrospinal fluid. Cone-shaped microneedles with hollow channels were fabricated using a series of microfabrication techniques: SU-8 photolithography for tapered geometry, reactive ion etching for sharpening the microneedles, 248 nm deep UV excimer laser machining for creating through-hole inside the microneedles, and metal sputtering for improved rigidity. Puncture tests were conducted using porcine dura mater and the results showed that the fabricated microneedle array is strong enough to pierce the dura mater. The in vitro biocompatibility test result showed that none of the 100 outlets of the microneedles exposed to the bloodstream were clogged significantly by blood cells. We believe that these test results demonstrate the potential use of the microneedle array as a new treatment of hydrocephalus.     

高岭土在碳热还原氮化过程中的相变

系统研究了苏州高岭土碳热还原氮化合成SiAlON过程在不同温度下的相变。对试样的XRD、SEM以及EDXA分析结果表明 ,1 30 0℃之前 ,试样中没有氮化物生成 ,物相为莫来石、石英和方石英 ;1 30 0℃时 ,高岭土开始发生氮化反应 ,生成过渡型SiAlON和β SiAlON。此时 ,石英和方石英相基本消失 ;1 4 0 0℃时 ,过渡型SiAlON、β SiAlON和X SiAlON三相共存 ,β SiAlON有所增多并有少量刚玉相生成 ;从 1 4 50℃到 1 550℃ ,Z值为 3的β SiAlON成为惟一的氮化产物 ,与少量SiC和刚玉相并存。莫来石在 1 50 0℃时完全消失     

用于虚拟现实的360度视频编码技术新进展*

随着虚拟现实技术不断发展,360度视频编码开始成为研究热点。应用于虚拟现实的360度视频与传统的视频相比分辨率更高,编码数据量更大,在实际应用中面临传输带宽有限的瓶颈,编码效率问题有待解决。归纳分析了国际标准组织联合视频研究组（joint video exploration team, JVET）正在制定的360度视频编码投影变换技术及其编码优化方法,综合对比了各变换技术的编码性能。根据当前最新研究成果,对下一步研究需要解决的问题进行了探讨总结,给出未来的研究方向和思路。     

新型液晶PVDF合金的研究

本文系统地研究了液晶聚合物(LCP)与PVDF合金共混体系的组成及加工工艺条件对共混物制件性能的影响。并用SEM观察了合金的形态结构。结果表明:在液晶含量10%左右时,加工温度为210℃,合金的拉伸强度最高,磨耗量最低,体系分散均匀并形成了较多的微纤结构。