FBOLES—outline of a frequency-based on-line expert system approach for fault diagnoses in nuclear power plants

The basic concept of a novel frequency-based on-line expert system (FBOLES) approach for on-line fault diagnoses in nuclear power plants has been presented previously. This paper reports further progress, and includes how to express the uncertainties of expert opinion in knowledge-bases and propagate then in inferences, and how to deal with imperfect knowledge-bases. It also describes the main elements of FBOLES and outlines how the system works under complex conditions including the dynamic behavior of signals during accidents, multiple failures, and on-line changes of plant operation mode. Its ability to diagnose root causes of accidents has been tested using the main steam and feedwater condensate systems of a full-scale, three-loop, 950 MW nuclear power plant simulated by the Tsinghua simulator. So far the results seem good.     

^125I,^131I诱发小鼠精子畸形发生率比较

本文选用 ICR 雄性小鼠,经腹腔分别注射不同剂量的~(125)I 及~(131)I,观察并比较它们对小鼠精子畸形发生率的影响及染毒后睾丸中放射性活度的变化。实验结果表明:(1)~(125)I 染毒后4—5周,0、185、370和555 kBq 各组精子畸形发生率分别为9.00‰、9.57‰、11.6‰及13.9‰;~(131)I 染毒后4—5周,上述各组精子畸形发生率分别为8.50‰、12.5‰、14.7‰和15.5‰;在相同注入量下,~(125)I 与~(131)I 诱发小鼠精子畸形发生率的差异各组均不显著(X~2检验,p>0.05)。(2)~(125)I、~(131)I 染毒后2h 至7天内,两者在睾丸中的放射性活度及变化规律相似,即在染毒后2h 达最高值,每克睾丸中~(125)I 和~(131)I 的放射性活度分别占初始注入量(370 kBq)的0.72％和0.50％,然后迅速下降,至一周时,仅分别占初始注入量的0.035％和0.011％。     

坐标旋转法的收敛性,误差估计及扩展

本文通过推广正规序列的定义,得到一个不等式,由此证明了统一计算初等函数数值的坐标旋转法的收敛性,作了误差估计,并拓广了所计算的函数范围,成为快速计算所有初等函数的统一算法．     

压缩弯曲小半径中频弯管工艺的研究

在分析了感应加热小半径弯管形变机理的基础上，提出了压缩弯曲的成型工艺，研制出了小半径中频弯管设备，并进行了大量的工艺实验和实验研究，取得了满意的结果。     

A circuit model for the class E resonant DC-DC converter regulatedat a fixed switching frequency

An averaging circuit model is developed for the class E resonant DC-DC converter regulated at a fixed switching frequency. The regulation is achieved by use of an auxiliary switch. The model is obtained based on the circuit analysis using the Fourier series expansion. Steady-state and small-signal dynamic analysis is presented, which reveals that the DC output is well controlled by the control angle of the auxiliary switch and that there exists a right-half-plane zero in the control-to-output transfer function. The analysis results are verified by the experiments     

A quantitative method for evaluating the performances of hyperspectral image fusion

Hyperspectral image fusion is a key technique of hyperspectral data processing. In recent years, many fusion methods have been proposed, but there is little work concerning evaluation of the performances of different image fusion methods. In this paper, a method called quantitative correlation analysis (QCA) is proposed, which provides a quantitative measure of the information transferred by an image fusion technique into the output image. Using the proposed method, the performances of different image fusion methods can be compared and analyzed directly based on the images of before and after performing the fusion. The correlation information entropy, based on the developed QCA, is also proposed and testified by numerical simulations. Typical hyperspectral data are applied to the proposed method. The results show that the method is effective, and its conclusions agree with the classification results in applications.     

间接原子吸收分光光度法测定聚丙烯、聚乙烯中的微量(?)

介绍用原子吸收分光光度法测定PE、PP氯含量。该方法采用氧气燃烧法处理样品,用Ag~+沉淀Cl~-,经分离后用原子吸收光谱测溶液中剩余Ag~+浓度,从而得到样品中氯含量。讨论了仪器参数、操作条件对测定结果的影响,结果表明,在分离前存放4～30分钟对测试结果无影响。火焰法的测定条件为波长328.1nm、灯电流7.5mA、狭缝宽度0.4nm、C_2H_2压力0.025MPa、空气压0.16MPa、燃烧器高度7.5mm。实验采用的离心转速2000r/min、时间5分钟、HNO_3浓度1%。该法灵敏度可达0.1μg/ml、相对标准误差<2%。     

Structure evolution of conductive polymer composites revealed by solvent vapor induced time-dependent percolation

The authors of this paper synthesized a series of amphiphilic triblock copolymers of polystyrene-b-poly(ethylene glycol)-b-polystyrene (PS-PEG-PS) having different PEG/PS ratios with nearly identical molecular weights of the entire copolymers. The interfacial interactions in the composites consisting of carbon black and the copolymers can thus be tailored. When these conducting composites are exposed to certain solvent vapors, their electrical resistances greatly increase, showing the gas sensitivity. The present work indicated that this switching behavior is controlled by the structural relaxation of the composites because matrix swelling acts as the main mechanism. The response time has been correlated with absolute temperature by Arrhenius equation, and the estimated activation energy reflects mobility of the fillers involved in the solvent induced expansion of the surrounding polymer. Therefore, by using the gas sensibility of the conductive composites, the structure evolution of the composite materials in solid state and the effect of filler/matrix interfacial interaction on the relaxation property of the matrix polymer has been inspected. It was found that lower activation energy represents stronger interfacial interaction in case good solvent of the matrix was used for the test.     

Insulating safety analysis of the hot-line sweeping robot

This paper presents a method of calculating the insulating safety distances for hot-line working robots at high voltage when dielectric is adulterated with conducts. Also, finite element method is adopted to calculate the electric field strength to find whether it is beyond the critical. The above methods have been applied to analyze the insulating safety of the robot for hot-line sweeping post insulators in a 220 KV substation. They have also been testified by experimentations.