Excellent Polyimide Dielectrics Containing Conjugated ACAT for High-Temperature Polymer Film Capacitor

In order to meet the requirements of polymer dielectric materials for high thermal stability and excellent dielectric properties in the application of high-temperature film capacitors, a series of polyimide (PI) films are fabricated by introducing a self-synthesized aniline trimer (ACAT) with a conjugated structure in this work. Since the conjugated ACAT in the main chains of PI improves the electron polarization and carrier mobility of the PI molecular chains, the dielectric constant of the ACAT-PI films is greatly enhanced (4.4–7.4). Meanwhile, the dissipation factor does not increase apparently (0.002–0.013). The dielectric properties are stable even when the temperature is up to 200 °C, the thermal degradation temperature is as high as 450 °C, and the mechanical properties are also excellent (70–105 MPa). Among all the films, the PI film with 5 mol% ACAT exhibits the maximal energy density of 3.6 J cm⁻³ under the field of 426 kV mm⁻¹, the high tensile strength (90 MPa) and the excellent thermal stability (T_d5 = 515 °C). The work paves the way to prepare high-temperature polymer dielectric film materials with high energy storage density.     

Stretchable,Antifreezing, Non-Drying,and Fast-Response Sensors Based on Cellulose Nanocomposite Hydrogels for Signal Detection

Conductive hydrogels have received widespread attention in the applications of biosensors, human–machine interface, and health recording electrodes. Herein, the conductive hydrogels integrated with antifreezing, water retention, reusable, and sensing performances are fabricated by introducing polyvinyl alcohol, cellulose nanofibril, MXene nanosheets, and glycerol. The as-prepared hydrogels present prominent electrical conductivity (2.58 mS cm⁻¹) and flexibility even at −18 °C. In addition, the hydrogels have favorable water retention performance and can reuse after heating and cooling. When used as sensors, the hydrogels illustrate high sensitivity (gauge factor of 2.30), fast response time (0.165 s), wide working strain range (559%), favorable linearity (R² = 0.999), and wide operating temperature range (−18 to 60 °C). The hydrogels can detect not only large strains of 10–200%, but also small strains of 1–5%, making them promising candidates for wearable sensors to monitor large and subtle movements.     

N3-Kethoxal-Based Bioorthogonal Intracellular RNA Labeling

There is growing interest in developing intracellular RNA tools. Herein, we describe a strategy for N₃-kethoxal (N₃K)-based bioorthogonal intracellular RNA functionalization. With N₃K labeling followed by an in vivo click reaction with DBCO derivatives, RNA can be modified with fluorescent or phenol groups. This strategy provides a new way of labeling RNA inside cells.     

Preparation and mechanical characteristics of fine-woven cloth and punctured felt preform Cf/C-SiC-ZrC composite

A 3D architecture carbon fiber preform, specifically fine-woven cloth and punctured felt preform, is used to manufacture a novel advanced C_f/C-SiC-ZrC composite. The composite matrix is produced by chemical vapor infiltration (CVI) plus precursor infiltration and pyrolysis (PIP) process and finalized by using a chemical vapor deposition (CVD) of SiC coating to make the final density of the material reach 1.95 g/cm³. The organic precursors of SiC and ZrC have a weight ratio of 4:1 in a xylene solute. The composite mechanical properties, such as tensile, compression, bending, shear, and Z-direction load bearing, are introduced under analysis to find possible applications for the composite. What is more, scanning electron microscope (SEM) images are employed to illustrate the failure behavior of the ceramic composite. The results showed that the punctured filament tows will be beneficial, not only for the composite to withstand compression force up to 308.6 MPa and shear strength to 18.14 MPa but also for the alternatively stacked weave piles and short fiber layers to support the punctured bundles, as well as to hold the composite structure under mechanical forces from different orientations, which is believed to reinforce the ceramic matrix for some high pressure and severe ablation applications.     

Microstructure and properties of WC-8Co cemented carbides prepared by multiple spark plasma sintering

In this study, WC-8Co cemented carbides were prepared by spark plasma sintering. When the samples sintered at 1300℃ were cooled to room temperature, the samples were sintered multiple times at 1250℃. The changes in microstructure and mechanical properties of WC-8Co cemented carbides prepared by multiple spark plasma sintering were studied. The hardness of cemented carbides increased in the first two sintering, reaching 16.5 GPa. However, the hardness decreased seriously in the last two sintering. The attenuation rates of hardness were 6.2% and 2.5% due to the abnormal coarse grains. Furthermore, the crack path along the grain boundary was almost straight, causing a decrease in the indentation fracture toughness of cemented carbides. Additionally, the grains of cemented carbides were abnormally coarsened, and the morphologies of grains became unstable due to multiple sintering.     

DMFC阳极催化剂用GRQD-NiCo2O4复合物的制备与电催化活性分析

采用水热法制备GRQD-NiCo₂O₄复合物,利用XRD、SEM及TEM分析其微结构,并探讨其作为DMFC阳极催化剂使用时的电化学性能。微结构分析表明所得GRQD-NiCo₂O₄复合物皆为具NiCo₂O₄单一相的尖晶石结构,且GRQD质量浓度高于0.25 g/mL后表面形貌将转变GRQD与NiCo₂O₄相互结合的状态。电化学分析表明添加GRQD可有效增强NiCo₂O₄的导电性并提升其电化学稳定性,其中GRQD质量浓度为0.25 g/mL时所得样品经500次循环测试后电流密度约为77.5 A/g,与循环5次后相比其电流密度剩余量最大（约为69.7%）,该样品作为DMFC阳极催化剂使用时性价比最佳。     

纳米MOFs及其衍生物在超级电容器中的研究进展

金属有机框架（MOFs）材料因其大的比表面积、可调控的孔道结构和丰富的活性位点引起了国内外学者们的广泛关注。近年来MOFs基材料广泛应用于能量储存与转化领域,但大多数MOFs基材料的低稳定性和低导电性等缺陷限制了其实际应用。通过对MOFs基材料进行改性,如采用共轭度高的有机配体以增加MOFs材料的稳定性,或MOFs衍生物以提高其氧化还原活性位点和导电性,从而达到提高MOFs基电极材料的电化学性能。主要介绍了原始MOFs及其衍生材料如碳材料、金属氧化物、金属硫化物、金属氢氧化物和金属磷化物等在超级电容器电极材料中的最新研究进展。研究表明,多金属MOFs材料或多金属MOFs衍生物有利于提高电极材料的电化学性能,而导电MOFs材料或MOFs衍生物中的碳材料有利于提高电极材料的导电性。最后对MOFs基电极材料在电化学储能领域中的研究做出了展望,指出MOFs基材料的形貌、组分和导电性是未来研究的发展方向。     

管桩水泥性能优化与控制方法

预应力高强管桩是采用高标号品种水泥等原料作为原材料,经离心工艺成型后,再通过蒸汽或蒸压养护而成的一种空心圆筒体的等截面混凝土构件,具有脱模快、强度高、施工方便、适用范围广、生产成本低等优点,广泛应用于建筑、港口、码头、铁路、桥梁等基础设施建设工程中[1]。管桩制品厂家一般对水泥强度要求高,尤其是早期强度[2],另外因操作时间不长和对产品外观质量要求较高,相比普通的混凝土,对流动性要求更高。中国葛洲坝水泥有限公司长期向荆州、荆门等地的管桩生产企业供应管桩专用水泥,为更好地满足客户需求,提升公司管桩水泥产品的强度与工作流动性能,开展相关试验研究。     

陶瓷/金属钎焊与扩散连接的研究现状

工程陶瓷由于具有优异的综合性能,在许多领域得到广泛应用,但其加工性能差,通常需要与金属组成复合结构.实现陶瓷与金属之间的可靠连接是推进陶瓷材料应用的关键,钎焊和扩散连接被认为是陶瓷/金属连接中较为适合的方法.文中对近年来国内外陶瓷/金属钎焊和扩散连接技术领域的研究现状进行了综述,认为活性金属钎焊和部分瞬间液相连接发展比较成熟,部分瞬间液相连接充分结合了活性钎焊和固相扩散连接两者的优点,将成为未来陶瓷/金属连接的发展方向.