喷动床反应模型的研究进展

喷动床是一种可实现热量重复循环的高效反应器 .介绍了目前喷动床研究中出现的各种反应模型 ,从等温和非等温两个方面讨论了一维轴向、流管、半分割和流动反应耦合等各类模型的基本思想和理论及各自的特点 ,并提出了进一步发展的方向 .     

竹材丙酮法木质素高效分离技术研究

在一定的温度、压力条件下,利用丙酮提取竹材中的木质素,丙酮通过蒸馏回收后,可以反复利用;而通过蒸馏,得到的高纯度的木质素是重要的化工原料,整个过程形成一个封闭循环系统,基本上无三废排放;研究结果表明:当丙酮浓度为80%,液固比为10∶1,在最高反应温度160℃下保温3h,降解木质素的效果最佳;为解决制浆造纸行业废水对环境的污染问题提出了一条新的途径。     

Dynamic response of Ti3SiC2 under shock compression up to 112 GPa

Ti₃SiC₂ is of interest due to its unique dual nature reminiscent of both brittle ceramics and ductile metals at ambient conditions. In this work, plate-impact experiments have been performed to study the dynamic behavior of Ti₃SiC₂ under shock compression up to 112 GPa by using laser velocity interferometer and electric pin techniques. Hugoniot elastic limits (HEL), spall strength, and Hugoniot equations of state have been obtained based on measured particle velocity profiles and shock wave velocities. The ratio of spall strength to HEL for Ti₃SiC₂ is larger than brittle ceramics but smaller than metals. This result indicates that the dual nature of Ti₃SiC₂ remains at least up to 10 GPa. On the other hand, the linearity of the Hugoniot equation of state, $D=6.9\text{0}1(22)+1.153(53)u_{\text{p}}$, suggests that the initial structure of Ti₃SiC₂ should be stable up to 112 GPa, in contrast to the result reported by Jordan et al. [J. Appl. Phys., 93 (2003) 9639].     

Effect of morphology on brittle-ductile transition of HPDE/CaCO3 blends

In this paper, the results of a series of investigations of the effect of morphology on the brittle-ductile transition for HDPE/CaCO₃ blends are summarized: (1) It seems the critical ligament thickness increases with increasing matrix toughness; (2) the interphase adhesion is very important for the toughness of HDPE/CaCO₃ blends; (3) small particles are more effective than large ones; (4) CaCO₃ particle aggregation will reduce toughening efficiency; (5) uniform CaCO₃ particle size is more effective than heterogeneous size for the toughening of HDPE. It is expected that a polymer with higher modulus as well as higher toughness will be obtained by appropriately controlling the morphology of HDPE/CaCO₃ blends. © 1993 John Wiley & Sons, Inc.     

容器设计中搅拌装置的轴向力分析

搅拌装置在化工厂中应用很广，在磷肥、钛白粉装置中（15kt/a)使用较多，仅钛白粉装置中就大约有40－50台，如增稠结晶器，中和槽等，搅拌操作所涉及的因素极为复杂，浆叶形式的选择，从力学的观点来说，迄今研究不够，本文就搅拌装置产生的轴向力问题进行了初步研究。     

Relation between structural evolution of the Longmenshan orogenic zone and sedimentation of its foreland basin

In order to determine the area for oil and gas exploration in China's north Sichuan basin, we have divided the time during which the Longmenshan foreland basin was formed into five periods, based on the sedimentary response relationship of the fore-land basin to structural evolution: 1) a late Triassic Noric period; 2) an early-Middle Jurassic period; 3) a late Jurassic to early Cre-taceous period; 4) a late Cretaceous to Paleogene-Neogene period and 5) the Quaternary period. As well, we analyzed the sedimen-tary environment and lithologic features of every basin-forming period. The results show that there are several favorable source-reservoir-cap assemblages in our study area, making it a major region for future oil and gas exploration in China's northern Sichuan basin.     

用于绕线机的无刷电机驱动的计算机控制

首先介绍了用于绕线机的无刷电机驱动系统构成,分析了其工况特点,在此基础上提出了系统的计算机控制策略以及实现方法,讨论了无刷电机的速度闭环控制和电子刹车问题,最后简要报告了系统的调试情况.     

纯低温余热发电模型的研究

根据系统动力循环原理及工质循环发电的特点,组建了纯低温余热发电系统模型,并对EHD蒸发器,冷凝器等进行了设计,并在此基础上提出了应综合考虑"吨熟料余热发电量"和"混合热效率"来评价纯低温余热发电效率,该模型在纯低温余热发电工程中具有推广价值.     

钢桥桥面铺装脱层破坏的分析

脱层是大跨径钢桥桥面铺装的一种主要破坏形式,而且出现频繁.文中针对各种破坏机理,提出了在桥面板上增加抗滑设施、提高防水粘结层强度,同时,重视防腐层施工质量等措施,这些措施在一定程度上能解决脱层问题.     

改进粒子群算法的动态空间调度方法

针对船体分段生产调度的多目标性和动态性,提出了一种改进粒子群算法的动态空间调度方法,确定船体分段在工作平台上的加工顺序和空间布局位置.算法以加工完成时间最短和空间利用率最高为目标,采用自适应惯性权重策略保证算法的收敛性,并引入遗传算法中的选择算子和变异算子增强算法的收敛速度和多样性,利用启发式定位策略确定分段的位置.最后,以船厂实际生产数据进行仿真验证.仿真结果表明,所提方法可以大大降低以手工方式制定调度计划的复杂度,并能有效地提高空间利用率达到70%,说明该方法是解决动态空间调度问题的一种有效方案.